Jump to content
SAU Community

Recommended Posts

looks good man, trying to get the motivation to do mine. were they much of a pain to fit

Mate it was very simple to do. All you need to do is remove the stock gauges (which is a single unit) and mount the new ones in its place. The ones I got are 52mm and fit in really easily behind the stock plastic window. All I needed to use was a very small amount of 3M double sided tape to keep them in place. It was my first attempt and only took me around 1/2 hr to complete (not hooked up yet tho). The boost gauge mount is off Ebay, $65 from WA.

I'm with you there mate, but I'm not sure how accurate the standard sensors are? I know Nismo use to make replacement gauges that just pluged straight in, maybe you could find a set of those?... The boost gauge was piss easy, I just put the T piece on the vacume hose between the BOV and the intake plenum. The Oil pressure and Oil temp should be easy enough using a sandwich plate. A mate of mine is a auto electrician so I'll get him to hook up the wiring and volt gauge.

Connecting them up is easy as pie, guys. Took me about 45 minutes to do all 5 of mine (boost, water temp, oil temp, oil pressure, wideband AFR), and I'm OCD when it comes to neat wiring so I took extra time making it all perfect.

Connecting them up is easy as pie, guys. Took me about 45 minutes to do all 5 of mine (boost, water temp, oil temp, oil pressure, wideband AFR), and I'm OCD when it comes to neat wiring so I took extra time making it all perfect.

How'd you hook it up mate? I've heard of people using the cigarette lighter to cut into but I only want my gauges to light up when the lights are turned on. When I pulled off the steering wheel trim to take a look at the wiring I had no idea what I was looking at lol :wacko:

If you want to do it simply, tap into the wire going to the light around the cigarette lighter. That's better than splicing the cigarette lighter direct anyway, as it can overload if you use a GPS or phone charger or anything like that and blow fuses.

I used to have mine like that, but have since redone them to be tapped into the headlight switch wire. Requires knowledge of a multimeter.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Kinda glad I never got to this ..    https://www.facebook.com/groups/1483859159195077
    • @GTSBoy This method was able to get readings of -10 to -2, so it looks like its monitoring.  Now I need to figure out why the vacuum on the line provided isn't alternating with manifold pressure.  I went with 2 lines that an RB25 tuner recommended but I'll get a longer hose and try directly off the back of the manifold.  He may have been used to OEM intake setups while I have a DBW setup that removed the MAF and IACV.  
    • I work at a car detailing and tinting shop called Quark which gets all manner of German cars in usually (mainly due to a contract with Mercedes Benz Kita Osaka, BMW Nishinomiya and others) but every once in a while something special comes in, like a fully restored 1972 HS30 Nissan Fairlady 240ZG... The shop owner had immediately started applying film to the windows as soon as it was in the shop so the interior was completely covered in towels and plastic sheets. But I could get a few photos of the engine bay which was restored like new. Such an amazing car to see in pristine condition in Japan these days.  
    • Was going to say the car pulls up nicely everywhere, especially going into that last long right hander before the main straight. Looks like a lot of fun.
    • Hey Dave, welcome aboard! Good to see another soon-to-be Stagea owner here. The wagons are awesome — plenty of space, still got that Skyline DNA, and loads of potential if you’re into mods. Definitely post up pics when you get it, everyone here loves seeing new builds. What model/year are you looking at?
×
×
  • Create New...