Jump to content
SAU Community

Recommended Posts

Sooo, on the way to Canberra today I gave it a bit of the lead foot and pop no more power.

The symptoms explain to a tee that it could be the intercooler piping has popped off.

Not able to idle runs like shit when forced to, black smoke billowing out, and it sounds kinda like a suby when I hold throttle to 1k 2k.

So now I'll be checking the intercooler piping. This will be my first time so I'll just be checking the fmic and trace the pipe to where it goes.

Is there anywhere else I should look if I don't find anything?

Yes I have googled.

Thank you

Link to comment
https://www.sau.com.au/forums/topic/387407-i-got-the-pop/
Share on other sites

Thanks man. I really hope I find the bastard causing me headache.

Just not looking forward to pulling the front bar off and everything else in my way.

yea i know what you mean been there before, on mine found the pipe connecting to the 'twin turbo' pipe split couldnt see it until i took the snorkel off the airbox

Link to comment
https://www.sau.com.au/forums/topic/387407-i-got-the-pop/#findComment-6177877
Share on other sites

Like you said just trace all piping, you could also spray soapy water on the hoses and start the car and look for bubbles

You'll only get bubbles if there's boost. At idle it will suck the soapy water in.

Link to comment
https://www.sau.com.au/forums/topic/387407-i-got-the-pop/#findComment-6177927
Share on other sites

I hate it when the pipes blow off. I would be driving on juice, then you hear a PSSH and its like MOTHERf**k. Check the bigger cooler pipes and if you find nothing, check the vacuum lines. If you still find nothing, do a proper intake pressure test and THEN use soapy water. Soapy water on an idle engine is all vacuum lol.

Link to comment
https://www.sau.com.au/forums/topic/387407-i-got-the-pop/#findComment-6178375
Share on other sites

I hate it when the pipes blow off. I would be driving on juice, then you hear a PSSH and its like MOTHERf**k. Check the bigger cooler pipes and if you find nothing, check the vacuum lines. If you still find nothing, do a proper intake pressure test and THEN use soapy water. Soapy water on an idle engine is all vacuum lol.

Haha yea just realised that woops :P

Link to comment
https://www.sau.com.au/forums/topic/387407-i-got-the-pop/#findComment-6178868
Share on other sites

Thanks for the tips guys. But as was said before it was a fairly easy find after you take all the parts off.

I didn't take the bumper apart, I just took the front lip and all the belly plastic off and vuala the on the passenger side, just above the indicator blew off.

I feel so much better now :).

Thanks again you are the best

Link to comment
https://www.sau.com.au/forums/topic/387407-i-got-the-pop/#findComment-6178989
Share on other sites

Ok back to the drawing board. I have hooked up the intercooler pipe that popped off but the car is acting even wierder now.

My battery was flat so I just got it jump started then. But the car is running terrible.

What else could have gone wrong?! It's not like before where I put the throttle down and I could at least hold the revs. But not now. It just wants to stall straight away.

Wtf else could have happened. Let me just note that I checked the passenger side first and did not think to go to the drivers side.

Any more help/advice?

Link to comment
https://www.sau.com.au/forums/topic/387407-i-got-the-pop/#findComment-6179540
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...