Jump to content
SAU Community

C210 Owners?

Ghostrider
 Share

Recommended Posts

Socrates Mentor

Socrates

Posted
Posted (edited)

Kev from here needs the chrome trim under the window on the drivers side back door.

However the little glass needs to come out for it to be removed, Possible to remove the whole door?

If not that's all good.

Centre Console.

Clips that hold the sun visors up.

Rear view mirror and it's 3 screw plastic mounting piece.

Headlight repeaters on the guards.

On the rear parcel shelf, the little plastic covers which cover the 3 holes on each side for the suspension, i need one.

Bonnet release cable. (All one piece from dash to end of bonnet) not hard to remove, one bolt under dash and one screw on rad support and pull through from drivers seat.

Clutch and brake pedal rubbers.

If they're not all there that's sweet and you will be paid for sure.

As Shaune knows I'm not here to f**k around with anyone, i just love C210s too much.

Edited by Socrates
Link to comment
https://www.sau.com.au/forums/topic/388089-c210-owners/#findComment-6187592
Share on other sites
Socrates Mentor

Socrates

Posted
Posted

Just spoke to Kev

He said try get all the interior bits you can get, door trims, Pillar covers etc. Dont worry about carpets or seats.

Front Grille and Headlight surrounds

Thanks a lot Ghostrider!

Link to comment
https://www.sau.com.au/forums/topic/388089-c210-owners/#findComment-6187595
Share on other sites
V8skylineMAN Grand Master

V8skylineMAN

Posted
Posted

might be easier to grab the whole car, haha

Horn button and the bit that is required to fit it to the steering wheel would be fantastic., and the rear view mirror too please.

Factory radio/tape player.

Cheers for the offer, don't forget to take a packed lunch, you might be there a while!

Link to comment
https://www.sau.com.au/forums/topic/388089-c210-owners/#findComment-6187610
Share on other sites
Ghostrider Grand Master

Ghostrider

Posted
  • Author
Posted

Sorry guys, been n gone, let home at 0800 Sydney time and never saw any of this. I have taken some pics on my phone and are attached, but the front carpet has gone to Mario along with some other bits he needed. I took the vents and surrounds from the console cause I know they break.

I'll give you an idea of the costs, front carpet, dirty as f@#k but intact, console vents, big heater hose under l/h/s of dash, the cover under glove box, and various clips & rubber plugs cost me $20.00.

Can somebody do me a favour and post a picture of the interior rear view mirror and it's mount please, as I have never seen one, but have numerous rear view mirrors here from earlier Nissans I have had.

The sunvisors are intact along with the clips, the chrome mould is also there for rear door, front and rear bumpers in fair straight condition, grille intact, but no headlight surrounds (I got them for Dan once before)

Cheers, D

post-2962-0-19991300-1326520646_thumb.jpg

post-2962-0-86353900-1326520670_thumb.jpg

post-2962-0-14950100-1326520694_thumb.jpg

post-2962-0-93460200-1326520718_thumb.jpg

post-2962-0-59077200-1326520739_thumb.jpg

post-2962-0-09275500-1326520766_thumb.jpg

post-2962-0-35597900-1326520788_thumb.jpg

post-2962-0-95531900-1326520816_thumb.jpg

post-2962-0-49113400-1326520838_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/388089-c210-owners/#findComment-6188122
Share on other sites
Factory 5 Mentor

Factory 5

Posted
Posted

Can you check the condish of the MR30 Rearview mirror? (plus any vent flappy bits that may of survived?)

If you look closely at the bonnet, it has cutouts for 280zx air vents, and the sump has a 'custom; oil drain for the turbo that used to be in it (this car is OLD.... lol)

Link to comment
https://www.sau.com.au/forums/topic/388089-c210-owners/#findComment-6195455
Share on other sites
coupe72001 Mentor

coupe72001

Posted
Posted

Hi Dennis.

If the chrome pieces of trim on the door under the front driver and passenger window don't have a scar from the side view mirrors I'd like them very much! They almost always do though :(

Cheers,

Drew

Link to comment
https://www.sau.com.au/forums/topic/388089-c210-owners/#findComment-6197143
Share on other sites
Socrates Mentor

Socrates

Posted
Posted

Kev from here needs the chrome trim under the window on the drivers side back door.

However the little glass needs to come out for it to be removed, Possible to remove the whole door?

If not that's all good.

Centre Console.

Clips that hold the sun visors up.

Rear view mirror and it's 3 screw plastic mounting piece.

Headlight repeaters on the guards.

On the rear parcel shelf, the little plastic covers which cover the 3 holes on each side for the suspension, i need one.

Bonnet release cable. (All one piece from dash to end of bonnet) not hard to remove, one bolt under dash and one screw on rad support and pull through from drivers seat.

Clutch and brake pedal rubbers.

As above, will update soon with kev's stuff.

Link to comment
https://www.sau.com.au/forums/topic/388089-c210-owners/#findComment-6197948
Share on other sites
Socrates Mentor

Socrates

Posted
Posted (edited)

Just spoke to Kev

He said try get all the interior bits you can get, door trims, Pillar covers etc. Dont worry about carpets or seats.

Front Grille and Headlight surrounds

Thanks a lot Ghostrider!

And also this!

+ external gutter trims

Edited by Socrates
Link to comment
https://www.sau.com.au/forums/topic/388089-c210-owners/#findComment-6197951
Share on other sites
  • 4 weeks later...
sa200b Newbie

sa200b

Posted
Posted

Guys, I've got a set of electric fender mirrors for a C210 with the controller in pretty good condition. Any idea what they are worth? (Sorry to hi-jack)

Hey sparkles, do you still have those mirrors? I'm desperate for some factory mirrors for my 200b. I'm pretty sure they are the same as C210 ones.

Link to comment
https://www.sau.com.au/forums/topic/388089-c210-owners/#findComment-6241569
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • The Bogan
      Torana Lx Gtr Hatch, Lots Of Pictures

      By The Bogan · Posted

      LOL, when one "money pit" is never enough Noice, and excellent work mate
    • The Bogan
      NC MX5

      By The Bogan · Posted

      I have more than enough digging, laying blocks, moving gravel, airrating, feeding and top soiling the grass, and setting up the veggie gardens growing some seedlings,  and then removing all the unused rock to keep me busy for the next few months at least,  hopefully the rain stops soon so I can get a few hours in this arvo, but, before that Sunday is washing day, is every body happy, you bet your life we are Nice country road day drives are a day off whenever I'm muscle sore from all the landscaping at the moment, but, more epic multiple day drives will start once the majority of the big jobs outside are completed
    • MBS206
      NC MX5

      By MBS206 · Posted

      I hear that would involve some nice country road drives into the hills for Mark...
    • MBS206
      Recommendation for engine oil funnel spill free

      By MBS206 · Posted

      I thought I'd come back and add something I JUST learned. A Toyota LandCruiser with a 1HZ, mates perfectly with a bottle of Nulon brake fluid. As in, it perfectly screws in. Great make shift funnel when you cut the bottom of it off. This may work for your Corolla.   Unfortunately, tipping a 10L drum is much harder than a 4 to 6L bottle, and they no longer include the easy pour tap which was just perfection to use previously.  
    • EndZee
      Fuel Pump Control Module & Dropping Resistor

      By EndZee · Posted

      Guys since i bought r33 gts25t coupe 1994 automatic a/t(manual swap 350z gearbox)  all i got is problems, always problems. Lets start with that when i turn key into ignition(ON) fuel pump doesnt always works. Sometimes i have to turn key twice Off/on/off/on until it primes. Its new, dw300 - 340lph. My gearbox broke so i did gearbox swap, install different intake manifold, injectors and i take pipes. Car was sitting in garage for more than half a year. I did assembly all not that long ago and when i turn ignition cant hear prime. All of sudden it stopped working. Theres many videos on YouTube how to make relay mod on r33 straight from battery so i did and it doesnt work! 😰 30 - battery positive  87 - positive from fuel pump to relay 85, 86 - one of two wires from original fuel pump wires(light blue, grey) and it didn’t work. so I check on ignition and took original BLUE relays wires from trunk, next to fuses. (I believe it’s IGN+ and ECU pin 18. it didn’t work…  tried connecting (IGN+ from og relay) and (ECU 104 from 1of4 FPCM wires) to my new relay 85/86 and it didn’t work.  I unplug FPCM. Didn’t work. im thinking what’s wrong   fuel pump is working, if I leave IGN+ on 85 and 86 straight to ground it works but it’s just nonstop. Since it getting constant 12v after key in ON. light blue wire gives me 6-8v.  so how this should be connected? What causing ECU not giving — on pin? Or I did sth wrong and that’s why it doesn’t work? I need negative signal on ECU that control fuel pump. What this should be?
×
×
  • Create New...