Jump to content
SAU Community

Recommended Posts

This seems near impossible, But just wondering if it can be done from up top or underneath with a mirror or torch. Im trying to figure out if I have Garrett 2650 -5's or the standard R32 GTR's. As I been told from someone they are rebuilt R32's and from another that they are 2560 -5' that had the seals redone.

Ive tried from up top. Can only see the oil sender thing, and 1-1 or something marked on it. Should I just give up lol.

Well after an Hour and a half, with 2 jack stands, 2 LED lights and a adjustable mirror, I managed to find..... hahah and read the tag on the turbo. You need to put the mirror inbetween the 2 front pipes, up on the cast side, then search around with the LED's and you will find it.. eventualy.

It Says 14411-06U00. I did a search on this, and apparently its a Nismo one?? so Not the standard R32 GTR turbos :) The previous owner had them rebuilt too. Can anyone shed any light or info on the 14411-06U00's?

To all those that say you can't without removing parts/pipes or taking engine out. you can :) its called determination lol.

Edited by 91BNR32

What is confusing though, is that is the tag I read off the rear Turbo, 14411-06U00 nismo which is fine, "Garrett A/R 42 M24"

Every pic I find for the nismo says "Garrett A/R *****60***** M24" i.e it says 60 not 42.

Edited by 91BNR32

They both suck equally.

Buy something modern and tune it up.

+1

One set are small and laggy, without a decent top end power punch.

Another set are even laggier, but will make a semi-ok top end.

Basically 1980s designs. There are much newer/decent options available.

Ah that sucks :( Whats a good pair of turbo's for the street that will flow 300rwkw under $2000?

These R32 Nismo ones would only have 1000km on them, they were fully stripped and rebuild before I bought the car. I was thinking Id get the car tuned and if I get around the mark, I might just be happy with that. I don't see the point in speding all that money for another 20-30kw & 200-300rpm less laggier, When I'm just after a 300rwkw street only car. Can anyone understand where I'm coming from lol?

Edited by 91BNR32

Ah that sucks :( Whats a good pair of turbo's for the street that will flow 300rwkw under $2000?

These R32 Nismo ones would only have 1000km on them, they were fully stripped and rebuild before I bought the car. I was thinking Id get the car tuned and if I get around the mark, I might just be happy with that. I don't see the point in speding all that money for another 20-30kw & 200-300rpm less laggier, When I'm just after a 300rwkw street only car. Can anyone understand where I'm coming from lol?

There isn't anything under $2,000.

Plus you are not talking 200-300rpm. It'll be more than that. Upwards of 500rpm.

Anyway the rest of the info, funnily enough, if contained in a thread:

www.skylinesaustralia.com/forums/topic/236467-definitive-guide-to-building-300-330awkw-gt-r/

Have a long read of it. Has ALL the info you need.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...