Jump to content
SAU Community

V36 - Another Tv Tuner Question

projectx
 Share

Recommended Posts

projectx Collaborator

projectx

Posted
Posted

Did anyone else have this installed in their V36? It looks like my car has an extra TV tuner already piggy backed of the factory one. Its a panasonic tu-dtv30-2. I even got the instruction manual and remote for it (all in japanese).

I know theres fat chance of it working in Australia but thought id ask before i replace it with an Asuka unit.

If theres a slight chance, i will find a Japanese person and get them to try and auto-tune it for me and see if it picks anything up. (i tried but the menu's are all in jap and cant figure it out)

Also, if i do get an Asuka (which is highly likely). Will the video work while car is in motion or do i need a cable or something?

thanks

post-76980-0-51906300-1327055159_thumb.jpg

post-76980-0-19621000-1327055175_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/388897-v36-another-tv-tuner-question/
Share on other sites
naz370 Contributor

naz370

Posted
Posted

Did anyone else have this installed in their V36? It looks like my car has an extra TV tuner already piggy backed of the factory one. Its a panasonic tu-dtv30-2. I even got the instruction manual and remote for it (all in japanese).

I know theres fat chance of it working in Australia but thought id ask before i replace it with an Asuka unit.

If theres a slight chance, i will find a Japanese person and get them to try and auto-tune it for me and see if it picks anything up. (i tried but the menu's are all in jap and cant figure it out)

Also, if i do get an Asuka (which is highly likely). Will the video work while car is in motion or do i need a cable or something?

thanks

I've got some Panasonic device installed in my v36 but I dont know what it is yet. I've got two thin black devices on both sides of my windshield and a sensor installed on my console obviously for some sort of remote that I dont have. i googled the part number of of those devices and it came up with some Jap page and appeared to be talking about digital antennas.

Its most likely NTSC formart anyway so you wont be able just to "tune" it to PAL. There will be some sort of conversion needed.

xfuzion Explorer

xfuzion

Posted
Posted

AFAIK, the v36 comes with a analogue tuner, which is now useless in japan, because they've switched off all the analogue transmissions and have gone to digital. The previous owner must've installed a digital tuner. Problem is, the tuners aren't compatible in Australia. AU uses DVB-T and japan uses isdb-t. You'll have to replace the whole unit to get it to work

projectx Collaborator

projectx

Posted
  • Author
Posted

I've got some Panasonic device installed in my v36 but I dont know what it is yet. I've got two thin black devices on both sides of my windshield and a sensor installed on my console obviously for some sort of remote that I dont have. i googled the part number of of those devices and it came up with some Jap page and appeared to be talking about digital antennas.

Its most likely NTSC formart anyway so you wont be able just to "tune" it to PAL. There will be some sort of conversion needed.

Sounds like you may have the same unit as mine. Maybe nissan dealers in Japan offered customers a replacement digital tuner after the analogue stations were switched off.

Anyway sounds like its not going to work so im going to get new tuner soon. At least it should be a pretty easy install since some of the wiring is ready to go.

projectx Collaborator

projectx

Posted
  • Author
Posted

Yeah I thought thats where it would be but coulnt see anything. I dont know where else they would hide this thing.

Maybe its on either side of the spare wheel under the plastic.. Or its possible they took it out?

Does your I/R remote sensor have a little red power light on it when the cars on?

naz370 Contributor

naz370

Posted
Posted

Maybe its on either side of the spare wheel under the plastic.. Or its possible they took it out?

Does your I/R remote sensor have a little red power light on it when the cars on?

Yes red light is on, Im going to check again

naz370 Contributor

naz370

Posted
Posted

Man I can't find this thing, checked under the plastics in the boot, all I found was a beige coloured box that had a Nissan logo on it but I dont think it has anything to do with the Panasonic tuner. Not in the glove box. Where else could they put it?

projectx Collaborator

projectx

Posted
  • Author
Posted
1327388805[/url]' post='6202358']

Man I can't find this thing, checked under the plastics in the boot, all I found was a beige coloured box that had a Nissan logo on it but I dont think it has anything to do with the Panasonic tuner. Not in the glove box. Where else could they put it?

Follow the cable trail from the antennas..

I ordered the zylux thing today from jb Hifi.. Got it for $430 in the end. Found out there cost price is $349 so if you feel like bargaining you could probably pick it up for under 400..

projectx Collaborator

projectx

Posted
  • Author
Posted

Picked it up today. They sent me the wrong one! Its the non high definition model. :(

Pissed off because i cant be bothered waiting another week for them to send the right one. Also the price is apparently the same so cant get a credit for the difference and keep the SD one.

I'll probably just install this one. Just means i wont have the HD channels.

projectx Collaborator

projectx

Posted
  • Author
Posted (edited)

I ended up installing the new tuner yesterday. Took a few pics along the way.

Img_3181.jpg

used the same mounting bracket from the panasonic.

Img_3182.jpg

Img_3185.jpg

Img_3186.jpg

Img_3189.jpg

Antennas are mounted at the top of the back and front windows just under the roof lining so you cant even see them.

Img_3191.jpg

Img_3190.jpg

Everything works great, even "drive in motion" works. All i did was gound the handbrake cable. I thought it was going to be a quick install because I could use the existing cables from the old tuner. It still took a good 4 hours by the time i removed the old antennas and everything. My back is not a happy chappy!

Edited by projectx
scarf Proficient

scarf

Posted
Posted

I ended up installing the new tuner yesterday. Took a few pics along the way.

Img_3190.jpg

Everything works great, even "drive in motion" works. All i did was gound the handbrake cable. I thought it was going to be a quick install because I could use the existing cables from the old tuner. It still took a good 4 hours by the time i removed the old antennas and everything. My back is not a happy chappy!

so good to see things in english.

So its operated from the remote, which makes the steering wheel and dash controls obsolete?

projectx Collaborator

projectx

Posted
  • Author
Posted (edited)

so good to see things in english.

So its operated from the remote, which makes the steering wheel and dash controls obsolete?

Yep, but i only plan to use the tuner for TV or movies. You can still use the volume up/down on the steering wheel, but to change channels you will need the remote.

For music i want to use the music box anyway.

Would be cool to get the touch screen working for the tuner! Im guessing thats either not easy or impossible. anyone know?

Edited by projectx

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      After market rear camber arm adjustment

      By GTSBoy · Posted

      Wheel alignment immediately. Not "when I get around to it". And further to what Duncan said - you cannot just put camber arms on and shorten them. You will introduce bump steer far in excess of what the car had with stock arms. You need adjustable tension arms and they need to be shortened also. The simplest approach is to shorten them the same % as the stock ones. This will not be correct or optimal, but it will be better than any other guess. The correct way to set the lengths of both arms is to use a properly built/set up bump steer gauge and trial and error the adjustments until you hit the camber you need and want and have minimum bump steer in the range of motion that the wheel is expected to travel. And what Duncan said about toe is also very true. And you cannot change the camber arm without also affecting toe. So when you have adjustable arms on the back of a Skyline, the car either needs to go to a talented wheel aligner (not your local tyre shop dropout), or you need to be able to do this stuff yourself at home. Guess which approach I have taken? I have built my own gear for camber, toe and bump steer measurement and I do all this on the flattest bit of concrete I have, with some shims under the tyres on one side to level the car.
    • Jarsky
      R33 Fuel Pump & Brakes after alarm swap

      By Jarsky · Posted

      Thought I would get some advice from others on this situation.    Relevant info: R33 GTS25t Link G4x ECU Walbro 255LPH w/ OEM FP Relay (No relay mod) Scenario: I accidentally messed up my old AVS S5 (rev.1) at the start of the year and the cars been immobilised. Also the siren BBU has completely failed; so I decided to upgrade it.  I got a newer AVS S5 (rev.2?) installed on Friday. The guy removed the old one and its immobilisers. Tried to start it; the car cranks but doesnt start.  The new one was installed and all the alarm functions seem to be working as they should; still wouldn't start Went to bed; got up on Friday morning and decided to have a look into the no start problem. Found the car completely dead.  Charged the battery; plugged it back in and found the brake lights were stuck on.  Unplugging the brake pedal switch the lights turn off. Plug it back in and theyre stuck on again. I tested the switch (continuity test and resistance); all looks good (0-1kohm).  On talking to AVS; found its because of the rubber stopper on the brake pedal; sure enough the middle of it is missing so have ordered a new one. One of those wear items; which was confusing what was going on However when I try unplugging the STOP Light fuses (under the dash and under the hood) the brake light still stays on. Should those fuses not cut the brake light circuit?  I then checked the ECU; FP Speed Error.  Testing the pump again; I can hear the relay clicking every time I switch it to ON. I unplugged the pump and put the multimeter across the plug. No continuity; im seeing 0.6V (ECU signal?) and when it switches the relay I think its like 20mA or 200mA). Not seeing 12.4V / 7-9A. As far as I know; the Fuel Pump was wired through one of the immobiliser relays on the old alarm.  He pulled some thick gauged harness out with the old alarm wiring; which looks to me like it was to bridge connections into the immobilisers? Before it got immobilised it was running just fine.  Im at a loss to why the FP is getting no voltage; I thought maybe the FP was faulty (even though I havent even done 50km on the new pump) but no voltage at the harness plug.  Questions: Could it be he didnt reconnect the fuel pump when testing it after the old alarm removal (before installing the new alarm)?  Is this a case of bridging to the brake lights instead of the fuel pump circuit? It's a bit beyond me as I dont do a lot with electrical; so have tried my best to diagnose what I think seems to make sense.  Seeking advice if theres for sure an issue with the alarm install to get him back here; or if I do infact, need an auto electrician to diagnose it. 
    • Duncan
      After market rear camber arm adjustment

      By Duncan · Posted

      Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
    • V35Newbie
      After market rear camber arm adjustment

      By V35Newbie · Posted

      I know I have to get a wheel alignment but until then I just need to bring the rear tyres in a bit they're wearing to the belt on the inside and brand new on the outside edge. I did shorten the arms a bit but got it wrong now after a few klms the Slip and VDC lights come on. I'd just like to get it to a point where I can drive for another week or two before getting an alignment. I've had to pay a lot of other stuff recently so doing it myself is my only option 
    • Duncan
      After market rear camber arm adjustment

      By Duncan · Posted

      You just need a wheel alignment after, so just set them to the same as current and drive to the shop. As there are 2 upper links it may also be worth adding adjustable upper front links at the same time; these reduce bump steer when you move the camber (note that setting those correctly takes a lot longer as you have to recheck the camber at each length of the toe arm, through a range of movement, so you could just ignore that unless the handling becomes unpredictable)
×
×
  • Create New...