Jump to content
SAU Community

Recommended Posts

Hey, i'm after an off the shelf (aka autobarn / supercheap etc) polish / pads to use to try and get some of the swirls out of the paint on my project. Budget is small (aka the less i spend the better) and im not after a perfect showroom finish. My housemate has one of those cheap supercheap buffers and already have some mothers quick detailer / clay bar and a wax. Just after advice on a polish and pad to use and any tips to get the best out of the average buffer. Really not interested in spending heaps, and i understand you get what you pay for but car will mostly be a track / weekender and already has chips etc so doesnt need to be perfect. Any help would be awesome.

Cheers, Jason

Edited by Jasonr31
Link to comment
https://www.sau.com.au/forums/topic/388925-detailing-on-a-budget/
Share on other sites

just get yourself some light cutting compound.. i got one here Mequirs Mirror glaze 2, Finecut cleaner, was only 15$ or thereabouts...

If you look on the bottles they have an indicator showing how heavy they cut on a scale of 1 to 10..its about 5...have a go with something like that and if it doesnt work maybe try something a little stronger..then work your way down to a light cut and then a sealant/wax..

Probably best to have a seperate pad for each but if you really wanna cheap out just wash the pad in hot water, it will be dry enough in the sun in about 15 minutes .

I would use a fresh pad then for your wax though.. :thumbsup:

Jason,

Sorry to let you down mate, but you really wont be able to perform any paint correct with that type of polisher.

IF you are on a budget, get a Random Orbital Sander with a 150mm plate from bunnings. Although this will not have the power of the Concours 900w Random Orbital Polisher (@$229) we sell, you could get one or two pads for $20 each and a I step product for $30.

IF you would like any advice let me know.

Im guessing this will not be the only car you ever polish, and I hate to see you waste money on something that wont do the job for you.. IF the budget is really tight, find a few mates and go in together. Otherwise once they see your car you will have to do it.

if you're on a tight budget i reckon just use your hands? a foam pad will be like ... 5 bucks for 2 or less for the meguiars ones? - they arent much more than the SCA one so dont stinge out, may as well get the megs ones!

use that, a good microfibre cloth .. and i really liked autoglym paint renovator when i first got my skyline. and follow it up with a better wax like meguiars tech wax .. or find something like naviwax which has some filling properties .. not the best solution but on a tight budget its probably a better solution than getting a machine and pads etc.

probably a better idea than using a supercheap buffer :\

or perhaps borrow/loan somebodys if you know anyone near you who has one

all the best mate :)

Jason,

Sorry to let you down mate, but you really wont be able to perform any paint correct with that type of polisher.

IF you are on a budget, get a Random Orbital Sander with a 150mm plate from bunnings. Although this will not have the power of the Concours 900w Random Orbital Polisher (@$229) we sell, you could get one or two pads for $20 each and a I step product for $30.

IF you would like any advice let me know.

Im guessing this will not be the only car you ever polish, and I hate to see you waste money on something that wont do the job for you.. IF the budget is really tight, find a few mates and go in together. Otherwise once they see your car you will have to do it.

I tried one of those $40 polishers from supercheap at my mates house one day and they have absolutely zero abilities to correct paint.

And I agree with Ant. If you don't have the funds to buy a decent machine, try and get a group of ppl to chip in and just share the usage.

Edited by JDM Performance

Forgot about this, went and got some cheap kitten polish and had a go with the super cheap buffer, seemed to get a few scratches out but not all (not deep ones either) and it seemed to make the paint dull in one small area? (guessing that may have been my technique or lack of.... its not bad can only just notice in the sun) but im guessing everyone is right when saying cheaping out generally wont work. The paint isnt all that bad anyway i might have another go but by hand next time and see if i can make any improvements... cheers everyone!

Forgot about this, went and got some cheap kitten polish and had a go with the super cheap buffer, seemed to get a few scratches out but not all (not deep ones either) and it seemed to make the paint dull in one small area? (guessing that may have been my technique or lack of.... its not bad can only just notice in the sun) but im guessing everyone is right when saying cheaping out generally wont work. The paint isnt all that bad anyway i might have another go but by hand next time and see if i can make any improvements... cheers everyone!

Forgot about this, went and got some cheap kitten polish and had a go with the super cheap buffer, seemed to get a few scratches out but not all (not deep ones either) and it seemed to make the paint dull in one small area? (guessing that may have been my technique or lack of.... its not bad can only just notice in the sun) but im guessing everyone is right when saying cheaping out generally wont work. The paint isnt all that bad anyway i might have another go but by hand next time and see if i can make any improvements... cheers everyone!

  • 5 months later...

Jason,

Sorry to let you down mate, but you really wont be able to perform any paint correct with that type of polisher.

IF you are on a budget, get a Random Orbital Sander with a 150mm plate from bunnings. Although this will not have the power of the Concours 900w Random Orbital Polisher (@$229) we sell, you could get one or two pads for $20 each and a I step product for $30.

IF you would like any advice let me know.

Im guessing this will not be the only car you ever polish, and I hate to see you waste money on something that wont do the job for you.. IF the budget is really tight, find a few mates and go in together. Otherwise once they see your car you will have to do it.

QFT

I bought one of the Concours polishers and wouldn't use anything else

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
×
×
  • Create New...