Jump to content
SAU Community

[Syd] R34 Gtr + S2K Parts Bonanza!

Chuey
 Share

Recommended Posts

Chuey Enthusiast

Chuey

Posted
Posted (edited)

All prices are def negotiable but I've done my marketresearch and priced them accordingly.

Pickup in Hurstville, Kellyville NSW (on appointment) orpostage can be arranged at buyers expense.

Best point of contact is SMS: 0404769968

1. Used Apexi VAFC II - Black in colour with harness and originalpackaging. Removed carefully so all the wires of the harness are useable. Onlything you'd need to get would be a few male/female connections for the spliceconnections. Controller is in decent condition but a few scratches on thescreen but nothing obscuring anything. (All paperwork, circuit diagrams etc includedas well) $200

th_IMG_0458.jpgth_IMG_0457.jpgth_IMG_0456.jpg

2. S2k OEM Black Tonneau Cover - Good condition but beensitting on a shelf folded for a while so will need to be put in the sun toreshape it easily or use a hair drier. :) $70

th_tonneau2.jpgth_tonneau.jpg

3. Wheel Nuts (Suit Hondas?) (12 X 1.5) - 16 Wheel nuts& 4 Lock nuts $25

th_IMG_0450.jpg

4. R34 GTR rear seatbelts + Buckles - $45 each or less forall 3.

th_IMG_0453.jpgth_IMG_0454.jpg

5. R34 GTR Rear Floor Mats X3 - Great condition, no rips ortears. $80

th_IMG_0455.jpg

6. R34 GTR OEM Side mirrors (Black) - Minor blemishes on thepaint but barely noticeable. $45 each or less for both.

th_IMG_0459.jpg

7. R34 GTR OEM front Indicators (Amber) - Nuff said $45

th_IMG_0460.jpg

8. R34 GTR OEM Air box + Snorkel - Near new condition greatfor defect dodging. Comes complete with filter and mounting hardware. $400

th_IMG_0461.jpg

9. RB26 Cam Cover (Red) - $70

th_IMG_0462.jpg

10. R34 GTR Windscreen Washer Bottle - $30

th_IMG_0463.jpg

11. R34 GTR OEM Injectors - No idea of condition $30

th_IMG_0464.jpg

12. R34 GTR OEM Fuel Pump - $120

th_IMG_0465.jpg

13. DTM Z-7 in Gunmetal grey. 18X7.5+40 Fronts, 18X8.5 + 38Rears wrapped in Kumho Ecsta Spt 255Z40 (10% remaining tread) and 225Z40 (40%remaining tread) They are in great condition with no rash. Perfect for a 2ndset of track rims -$720

th_PICT0002.jpgth_IMG_0922.jpg

Following items are pics on request as they have been in storage for ages.

14. R34 GTR OEM Boot Lid (Black) - No spoiler, light or keybarrel. $200

15. R34 GTR OEM Bonnet (Black, non-vspec) - $500

16. R34 GTR OEM Xennon Converted Headlights. - Comes with anextra ballast. Is missing a few tabs a repair job for one of the bottom mountingholes. Perfect working order. $500

17. R34 GTR OEM Non-Vspec Rear Seats (Grey) - Excelentcondition with no rips or tears. Will fit R33 as well - $300

Edited by Chuey
Link to comment
https://www.sau.com.au/forums/topic/389227-syd-r34-gtr-s2k-parts-bonanza/
Share on other sites
EJD001 Mentor

EJD001

Posted
Posted

S2k OEM Black Tonneau Cover - Good condition but beensitting on a shelf folded for a while so will need to be put in the sun toreshape it easily or use a hair drier. :) $70

is this the actual roof of the car... or the cover that covers the roof when its down??

  • 3 weeks later...
  • 4 months later...
Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      R32 Gtst - Track Car

      By Duncan · Posted

      Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • Dose Pipe Sutututu
      R32 Gtst - Track Car

      By Dose Pipe Sutututu · Posted

      https://www.facebook.com/share/p/18rmVb1SKB/ 
    • GTSBoy
      Leak from Tokico BM50 Brake Master Cylinder

      By GTSBoy · Posted

      The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • No Crust Racing
      R32 Gtst - Track Car

      By No Crust Racing · Posted

      Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
    • MBS206
      R32 Gtst - Track Car

      By MBS206 · Posted

      I feel there must have been a FB/insta post and the weekend did not start well at all I hope everyone is all okay
×
×
  • Create New...