Jump to content
SAU Community

Drag Racing Your R35: All You Need To Know About Andra


Recommended Posts

  • Replies 73
  • Created
  • Last Reply

Top Posters In This Topic

It would be truly hilarious to turn up to Wicked Wednesday in a bog stock Bugatti Veyron and be told not to come back until attending to the following;

4.11.6 Parachutes

Cars exceeding 140 MPH must be fitted with drag racing parachute.

4.12 Interior

4.12.1 Upholstery/Seats

Purpose built race seat is required for cars quicker than 10.00

4.12.2 Window Nets

Cars quicker than 11.00 require window nets UNLESS arm restraints are used instead.

4.14 Roll Bars & Safety Cages

4.14.6 Full 6 point roll cage with removable support members

Unmodified cars ET 8.00 - 9.99: full cage mounted at six points with removable side intrusion bars

4.17 Technical Inspections

Cars quicker than 11.00 require Tech Inspections carried out prior to issuing (or renewal of) Log Books. you must get "Teched" every two years. Evidence of Tech Inspection is by chassis sticker on the vehicle (on the roll bar).

4.19 Driver Safety

4.19.1 Arm Restraints

Cars quicker than 11.00 require arm restraints to prevent arms from extending outside confines of roll cage.

4.19.5 Head Protector

Cars with a roll cage rehire a padded head protector at bcd of driver's helmet.

4.19.9 safety Belts/ Harnesses

Cars faster than 130 MPH: 5 point harness

I will at least give credit to SD, WB and PM for their intention to bring drag racing a step forward.

Aaron, I take it that WB and PM have adopted these new regs for street meets? Any chance that SD can renegotiate that particular part of the lease? How long is the lease for? :D

They have, and for every person who is overjoyed, there are some who have the shits with it.

The problem is, you have to accomodate for the lowest common denominator. Having rules based on individual cars is just way to much f'ing around.

Charlie, I'm not sure when the lease is up for re-negotiation.

The thing is though, SD & ANDRA have bigger things to worry about atm, than just late model cars that can run 10's with minor mods.

SD is in a bad way (financially) and if you think that the ANDRA fee's are over the top, you should see the rent that has to be paid & the cost to hire the ambulance etc.

Do you know if the other ANDRA drag tracks are in the same financial situation?

The situation regarding modern cars remains though, I've been speaking with other clubs about filling spots for an upcoming SAUNSW private rental day at SD (as has the rest of the SAUNSW execs) and other club officials and members are happy to go ahead and get involved but as soon as the price and more importantly the rules are mentioned they all pull out. Maybe we are not well connected enough to other clubs who are more focused on drag racing? Although that highlights the point about the sports accessibility needing to be looked at.

It would be interesting to see how many bookings SD have for weekends and weeknights (other than the regular off street meets).

I agree. It was a struggle to fill the minimum spots for the last SAU:NSW Drag Day. This wasn't be helped by the lack of accessibility and relative cost, coupled with the fact that there were limitations and additional costs if you went quicker than 12.00 (SS licence), and you would be booted if you went quicker than 11.00.

Comparatively, people would prefer to go across the road to EC and race around all day instead of SD at similar costs.

SD needs to look at its current set up (particularly toward entry level racing) if it hopes to allow the sport to grow, and in turn increasing its bottom line. For eg, if they allowed 100 cars at private days @ $100 each, it would be more attractive to street cars (particularly when Wednesday night street meets are always at capacity).

The idea of allowing modern cars to go quicker without the need to have additional safety gear is a step in the right direction. Unfortunately, their hands are tied by the government. So back to square one there...

Looks like drag racing in NSW can only go round and round in circles...

For eg, if they allowed 100 cars at private days @ $100 each, it would be more attractive to street cars (particularly when Wednesday night street meets are always at capacity).

Surely this 40 minimum cars at $200 and 50 maximum wouldn't be in their lease right?

If so, and we, as the club, were offered that deal, we would be able to go ahead with private rental days. But as it stands now, we're likely to get around 18-20 entrants and the hire agreement means the hirer (eg SAUNSW the club) has to pay for the unused spots being around 20-22 at $200 ea ($4000-4200) which of course is not acceptable.

Hopefully SD can listen to feedback and adjust their packages to suit.

  • 4 weeks later...

SD is a Govt owned facility & the lease with the Govt states that ALL events must be run under full ANDRA sanction.

Real pity that.

I wonder how the Motorplex in Perth are going with their New Regulations for 2012

Modern Street Cars Originally fitted with four Wheel Disc Brakes & Air Bags

10.00 – 10.49

Original 3 point lap sash As manufactured

Approved Full face Helmet – AS 1698 min

Long Sleeve, Long Pants clothing & closed shoes

You could take your R35 out there and run a 10.01 pass day in, day out.

Much more realistic. Does anyone know if the Plex is ANDRA sanctioned for Street Meets? Guessing not, otherwise it's one rule for one mob, and another rule for the next.

It has nothing to do with "one rule for one mob, and another rule for the next". As stated earlier, the SD lease specifically states that all events must be run under Andra sanction, wheres the 'Plex and WB don't have such terms, and hence are able to run different street meet rules.

I am sure that the other tracks around Aus can also do this (Calder, Heathcote etc)

wheres the 'Plex and WB don't have such terms, and hence are able to run different street meet rules.

Well hence my question...

Does anyone know if the Plex is ANDRA sanctioned for Street Meets?

Ash,

PM and WB are ANDRA sanctioned tracks (for all events), however, they have negotiated public liability cover that will allow them to run minor events such as street meets under separate (or modified) rules to ANDRA. SD cannot do this due to their lease. Has nothing to do with ANDRA.

ANDRA won't sanction it, it has everything to do with it - according to earlier posts at least anyway.

Was just posting more info I came across that was interesting to this whole debate etc.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • I get that taking off the head is best but that's a bit much for "just" valve seals. I was just under the impression that one would be able to rotate to TDC and be able to temporarily drop the valve without losing it and effectively having to remove the head to then recover it. I never knew people actually pushed rope into the cylinder to do valve seals hahaha So just to confirm, just going to TDC will not work? In that case I know when I do valve seals I'll maybe just remove the head and do some other things while I'm there, or just wait until I do an engine build.
    • The old approach was to fill the cylinder/chamber with a length of rope pushed in through the sparkplug hole. The new approach is to connect compressed air to the sparkplug hole and fill it with enough pressure to push the valves up. Doing either of these things with the head on and the engine in the car is a lot less pleasant than doing it properly.
    • Can't you put the pistons to TDC and then do the valve seals? Or will the drop down too far to pull them back up?
    • One thing I can tell you is, do it properly the first time. If you encounter unexpected problems just let the car sit for a week or two if you have to get some other parts or figure stuff out.  I'd have said go and use as many OEM parts as possible but since you want to change the turbo later on a custom kit is probably the better choice. Since I have no experience with RB25 just compare parts diagrams and images before buying a line kit and it should be easy to see if it has everything you need. Amayama has very good parts diagrams and part number lists, that is what I used a bunch to figure out what I might need. And don't forget to plan ahead and possibly renew other stuff that's easy to get to while you're in there doing the turbo lines. Happy wrenching
    • Update 4:   Hi all, good news. Engine is running and all the gaskets and seals seem to be working as intended. No leaks so far, even the JB Weld seems to hold. I flushed out the old coolant a few times and put in fresh coolant, not Nissan stuff, I decided to try the Ravenol Protect FL22, they claim it works for a wide variety of JDM cars and the opinions on it by some people were pretty good. And it has the nice poison green color! And man am I glad I bought a coolant system tester earlier this year, vacuum filling works wonders on this engine. I can definitely recommend this to anyone still doing it the old school way. All you need is compressed air supply. Will have to do a small test drive as soon as I can, I removed the gauge cluster again as the tacho needle was still bouncing around a bit but it was much better than before already.  I also found some cracks on all 4 tires inner and outer sidewalls. Apparently these tires should 't be parked on for extended periods or be kept under 0 degrees during storage, which I did not know. Clearly the previous owner didn't look into those details either, he probably bought them just cause they are cool semi-slicks. I'm just wondering how tf I am supposed to reach 30-80 degree tire temperatures on the public road consistenly, these tires were never going to work for my use case. I'll probably order Continental SportContact7 ones as these are the best allround summer tire available right now and I don't think I'll need anything crazier for now. Do let me know if you have experience with various tires and which ones you recommend.
×
×
  • Create New...