Jump to content
SAU Community

Recommended Posts

Due to be time poor and wanting to clear up some space im selling off a heap of good quality parts that have been accumulating for various cars I own but dont have the time to complete at the moment.

Dailey engineering 6 stage dry sump pump

This is used but has been 100% rebuilt and is in perfect condition. Has a CNC machined scavenger manifold with a -16 outlet welded on.

Come with a top shelf Dailey engineering HTD pulley

Asking $1000 with the pulley

Barness 5 stage dry sump pump

This pump is used and has been sitting for approx 2 years. Was run on one of my previous race cars and removed when the car was retired from racing. was flushed with cleaning solvent and filled with WD40 before sitting on the shelf. Comes with a front pulley and does require a new front o ring seal as the last time it was used it had a small leak from the housing seal. ( I have the seal and its easy to replace)

Comes with a quick release scavenger manifold that was modified to suit the RB26

Asking $600

Pair of 996 porsche cup car front callipers

These is in usable condition with no leaks or detrimental damage. They have been used on a race car and the visual condition is indicative of this. Cermaic piston crowns and they come with a set of Pagid pads 50% worn.

They use a 380mm rotor which I may be able to supply at additional cost

Asking $700 the pair

Pair of 997 cup car rear callipers.

Same deal as the fronts but these are in good condition visually and done less work than the fronts.Can supply rear pads for additional cost but no rotors available at the moment.

2x pairs to get rid of $500 a pair

Brand new pair of wilwood Prolite 6R callipers

These were bought brand new for a car I was building but have no time for. They have never been bolted to anything and have never had a pad fitted to them. Perfect condition, boxes are gone but never used the callipers. Stainless steel pistons, backings etc etc.

Asking $800

Full set of rebuilt ohlins shocks

These are the absolute holly grail of ohlins shocks. 4 way adjustable (high and low speed bump & rebound) external resiviour with a separate bump piston.

They have been valved to suit an R34 GTR and have spherical bearing mounts top and bottom. They are used but have not been used since full rebuild and valving was done. These are not a direct fit into anything, more for the serious car builder who is doing a complete custom setup.

Advise on spring choice etc is available to the buyer if requested.

Asking $1800 Ridiculous price for a set of shocks that are worth 8x that new.

RCI fuel cell

Again brand new but never been fitted to a car. Was traded by me for a custom fuel cell in an escort rally car and I intended to use it for something one day but its in the way and must go.

Ill have to check dimmesnsions but it assume 60-70L from the size of it.

Covered in dust needs a good clean up, has always been sealed though.

Asking $200

FG falcone 6 cyl engine and BF 5 speed XR6 turbo box

Bought for a project but cant find time to do it.

Engine had done 30,000Km's and has had some of the timing case removed. I have atomic springs, timing gear and balancer for it. Box is standard, also has bolt on accessories like alternator etc.

Asking $1300 for the whole lot

R34 Skyline GTT rolling shell

Race only R34 GTT roller. Has all windows, pannels and a whole interior thats removed but complete minus seats and carpet.

Has a brand new carbon bonnet, brand new carbon guards (over 1K worth) good headlights, 2 sets of tail lights, 2 boot lids and loads of other parts to go with it.

Selling due to lack of time to do the job

Asking $3000 with all the parts and carbon gear

There is going to be more stuff coming up for sale but for the time being that is all.

Everything is located in sydney, prefer pick up but may post smaller items at your cost.

Low ball offers will be ingnored, decent offers will be replied to.

Photos to come

Link to comment
https://www.sau.com.au/forums/topic/390487-motorsport-parts-clear-out/
Share on other sites

Dailey engineering Dry sump pump

post-20349-0-12875300-1328328346_thumb.jpg

post-20349-0-85186100-1328328782_thumb.jpg

Barness 5 stage oil pump

post-20349-0-33060400-1328328702_thumb.jpg

Wilwood pro lite calipers

post-20349-0-21173100-1328328753_thumb.jpg

Rear 997 cup callipers

post-20349-0-95086800-1328328903_thumb.jpg

996 Cup front callipers

post-20349-0-16618600-1328329002_thumb.jpg

R34 GTT rolling shell

post-20349-0-13181600-1328328439_thumb.jpg

post-20349-0-32529200-1328329042_thumb.jpg

RCI fuel cell

post-20349-0-06145800-1328329064_thumb.jpg

Ohllins shocks

post-20349-0-04044200-1328329118_thumb.jpg

There is also an R32 Gtst rolling shell that id really like to rid myself of. Its a bare roller with doors and front guards, bootlid and no interior.

Has been stripped ready to cage etc.

I want $400 someone come and take it away!

I'll post up dimensions of the fuel cell latter today.

It should fit behind the back seat of a R32. I was planning to use it as a water tank on my transporter but made something else.

Yeah it is Dave.

Pm's asking if I have any other parts will be ignored.

I don't have seats, steering wheels, gearknobs etc etc.

What is advertised in this thread is everything that selling for now.

To be honest I've never even taken the lid off to check......

If it really matters I can check tomorrow and let you know.

I'll take $180 for it if you organize courier etc.

Brad

  • 2 weeks later...

RCI fuel cell I believe to be sold pending payment when I return.

I'll be back in Sydney this coming week and would REALLY like to move the R34 out of the workshop.

If someone is even remotely considering it send me an offer. I do want it and all the parts I have for it gone......

Details for fuel cell payment are on the way to you.

Yes I'm located in Sydney.

No none of the calipers come with any type of adaptor. They double in value when they come with brackets to suit.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...