Jump to content
SAU Community

Recommended Posts

Hey Fellas, i recently had some trouble with my coilpacks, the car was drinking lots of fuel and would get chocked up in high revs i was also getting about 300km per tank of fuel max, i changed the coils to spitfires and the fuel improved to 400+km per tank, and the performance was incredible, so smooth and i can squeeze so much more out of each gear.

now!. i think i can improve my fuel consumption and performance hopefully by changing the injectors. right now i have stock ones and the area around them always looks a bit moist as if they are leaking or something of that nature.

i have no idea about injectors tho and the whole 300cc, 500cc, 1000cc,

What is the stock CC for the R33 s2?

What will give me good fuel economy and performance?

Any good brands?

thanks guys

Link to comment
https://www.sau.com.au/forums/topic/391220-need-some-info-on-injectors/
Share on other sites

Stockers are 370cc. You do know if you go bigger injectors you will need an aftermarket ECU and a tune to suit (1000+).

If they are leaking from the rubber o-ring, you are better off replacing those o-rings.

yeah i have replaced the O2 sensor, didnt seem to do much tho. o-rings and a clean sounds good, since the other options are a bit expensive for now.

i want to do a NIStune but its a bit expensive, anyone had it done??

well i wasnt sure thats why i asked, i know a while back i got quoted around $1300 for a NIStune, so i thought since the coilpacks made such a big diferance at low cost, perhaps better injectors will help also

well i wasnt sure thats why i asked, i know a while back i got quoted around $1300 for a NIStune, so i thought since the coilpacks made such a big diferance at low cost, perhaps better injectors will help also

A good tune is probably the BEST thing you can do for your car. You'll get more power, better drive-ability and a LOT better fuel consumption. I'm making almost 400rwhp and I still get 550kms to a tank. Best I ever got when my car was stock was about 350.

Injectors will do the opposite, if not make your car undriveable without a tune. As Bob said, better off just getting your injectors cleaned and replacing the O-rings. Still highly recommend getting a tune though.

Damn! 550km @400rwhp thats worth a look into, did u get a tune up or get the NIStune thing?

I think you need to understand what people here mean by "tune". It's not like the old days when a "tune up" meant the mechanic would fiddle with all the mixture screws and linkages and pump jets whatnot on the carby, clean/file/replace and set the points and so on. All the little work that made the car's various control systems (such as they were) go back to being in proper spec. In those days your car could get a new lease on life after a tune up because over time all those things would vibrate and wear and block up and so on until they weren't working right.

In a modern car, most of that doesn't happen. Plug leads and plugs may age out and need replacing, throttle bodies might benefit from a clean out, but there's not a lot else that you can do that is akin to a "tune up" from the old days.

BUT......a "tune", now that's a different story. Nissan ECUs aren't reflashable off the factory floor (like many other cars these days are). So the minimum way to make a Nissan ECU tunable is to replace the chip in it with a Nistune board that effectively turns the ECU into a fully realtime programmable ECU. You can do it to pretty much all of them, except the R33 ECU, which you have use an ECU from another car for and do some fiddling. Or, you buy an aftermarket ECU. When you tune the ECU, either just retuning on a stock engine to take out all the extra fuel that the Nissan tune has in it (and make the ignition timing more agressive) or do a complete tune to suit a modified engine, you will make the car use the minimum (safe) amount of fuel for the work it has to do. That's all.

yeah i know what a ture is, its much different from me taking things appart on a weekend and screwing around just because its fun, what i was getting at was did he get the nistune programed into the ECU since it is fairly new or did he go with the regular tune and dyno that every jap car gets whether its a nissan or subaru etc

what i was getting at was did he get the nistune programed into the ECU since it is fairly new or did he go with the regular tune and dyno that every jap car gets whether its a nissan or subaru etc

I still don't think you understand. There is no "regular tune and dyno that every jap car gets whether its a nissan or subaru". What did you mean by that?

And more to the point....he's making 400rwhp.. Of course his car has been tuned. That's not going to happen on an untuned factory ECU now, is it? Whether he has a Nistune conversion in his ECU or he's got an aftermarket ECU really doesn't make any difference to the fact that one way or another, his cas has been "tuned".

Edited by GTSBoy

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Did this end up working? Did you take some pictures?
    • And finally, the front lower mount. It was doubly weird. Firstly, the lower mount is held in with a bracket that has 3 bolts (it also acts as the steering lock stop), and then a nut on the shock lower mount itself. So, remove the 3x 14mm head bolts , then the 17mm nut that holds the shock in. From there, you can't actually remove the shock from the lower mount bolt (took me a while to work that out....) Sadly I don't have a pic of the other side, but the swaybar mounts to the same bolt that holds the shock in. You need to push that swaybar mount/bolt back so the shock can be pulled out past the lower control arm.  In this pic you can see the bolt partly pushed back, but it had to go further than that to release the shock. Once the shock is out, putting the new one in is "reverse of disassembly". Put the top of the shock through at least one hole and put a nut on loosely to hold it in place. Put the lower end in place and push the swaybar mount / shock bolt back in place, then loosely attach the other 2 top nuts. Bolt the bracket back in place with the 14mm head bolts and finally put the nut onto the lower bolt. Done....you have new suspension on your v37!
    • And now to the front.  No pics of the 3 nuts holding the front struts on, they are easy to spot. Undo 2 and leave the closest one on loosely. Underneath we have to deal with the wiring again, but this time its worse because the plug is behind the guard liner. You'll have to decide how much of the guard liner to remove, I undid the lower liner's top, inside and lower clips, but didn't pull it full off the guard. Same issue undoing the plug as at the rear, you need to firmly push the release clip from below while equally firmly gripping the plug body and pulling it out of  the socket. I used my fancy electrical disconnect pliers to get in there There is also one clip for the wiring, unlike at the rear I could not get behind it so just had to lever it up and out.....not in great condition to re-use in future.
    • Onto the rear lower shock mount. It's worth starting with a decent degrease to remove 10+ years of road grime, and perhaps also spray a penetrating oil on the shock lower nut. Don't forget to include the shock wiring and plug in the clean.... Deal with the wiring first; you need to release 2 clips where the wiring goes into the bracket (use long nose pliers behind the bracket to compress the clip so you can reuse it), and the rubber mount slides out, then release the plug.  I found it very hard to unplug, from underneath you can compress the tab with a screwdriver or similar, and gently but firmly pull the plug out of the socket (regular pliers may help but don't put too much pressure on the plastic. The lower mount is straightforward, 17mm nut and you can pull the shock out. As I wasn't putting a standard shock back in, I gave the car side wiring socket a generous gob of dialectric grease to keep crap out in the future. Putting the new shock in is straightforward, feed it into at least 1 of the bolt holes at the top and reach around to put a nut on it to hold it up. Then put on the other 2 top nuts loosely and put the shock onto the lower mounting bolt (you may need to lift the hub a little if the new shock is shorter). Tighten the lower nut and 3 upper nuts and you are done. In my case the BC Racing shocks came assembled for the fronts, but the rears needed to re-use the factory strut tops. For that you need spring compressors to take the pressure off the top nut (they are compressed enough when the spring can move between the top and bottom spring seats. Then a 17mm ring spanner to undo the nut while using an 8mm open spanner to stop the shaft turning (or, if you are really lucky you might get it off with a rattle gun).
    • You will now be able to lift the parcel shelf trim enough to get to the shock cover bolts; if you need to full remove the parcel shelf trim for some reason you also remove the escutcheons around the rear seat release and you will have to unplug the high stop light wiring from the boot. Next up is removal of the bracket; 6 nuts and a bolt Good news, you've finally got to the strut top! Remove the dust cover and the 3 shock mount nuts (perhaps leave 1 on lightly for now....) Same on the other side, but easier now you've done it all before
×
×
  • Create New...