Jump to content
SAU Community

Recommended Posts

hi guys

im wondering if any of you guys on here are plumbers. basically i want/need some work done and i cannot decide which way to go. below are some images that show my problem

post-44390-0-93033700-1329112298_thumb.jpg

post-44390-0-53013600-1329112302_thumb.jpg

post-44390-0-00595600-1329112307_thumb.jpg

post-44390-0-39991000-1329112310_thumb.jpg

post-44390-0-77747300-1329112314_thumb.jpg

as you can see my drains cannot seem to cope with 10 minutes of rainfall and whoever built my house did a shit job with landscaping. currenlty im looking into french drains but am not toooooo sure about it.

ill explain what i want done/are thinking about in much more detail when required.

thanks

adam

Link to comment
https://www.sau.com.au/forums/topic/391571-plumbers/
Share on other sites

Qld??

Talk to god.

Just did my fathers drainage at his place in noosa last december (some holiday), same as you he had standing water and a lot of it. The solution was 5 pits stepped down to the road and a butt load of open gutter drains near the house with pipe work to tie all the shit together. Tools required 1 shovel, i pick, 1 level and some string. Took 3 days of off and on labour, probably 14-16hrs work by myself.

Edited by madbung
Link to comment
https://www.sau.com.au/forums/topic/391571-plumbers/#findComment-6232460
Share on other sites

yeh... im aethist so god probably would not want to hear from me lol

the problem with my place is that im below the street (JUST) so all of my stormwater and sewerage go back down the block (1,200m2) and from what ive gathered most of my underground pipes are under concrete. half of the problem is that the concrete is not leveled (imo) correctly to move the water away from the house

Link to comment
https://www.sau.com.au/forums/topic/391571-plumbers/#findComment-6232664
Share on other sites

By the looks of it you might be able to get the water out of there without cutting concrete. a few drain entrances next to the concrete with a pipe to the lower ground or something.

images 1 and 2... ive already done that. it does drain away eventually

Link to comment
https://www.sau.com.au/forums/topic/391571-plumbers/#findComment-6232981
Share on other sites

Gunna have to cut the slab and put couple of rain water outlets (generally bout 200mm round or square with a lil gal grate on top) in or get some arco drains (black poly grates bout 100mm wide come in 1m lengths) put in and hook them up into your existing stormwater lines. Do your gutters overflow in the rain? If so might be worth chucking an electric eel up the pipes or at least have them inspected with a camera to see whats going on on the inside mate.

Link to comment
https://www.sau.com.au/forums/topic/391571-plumbers/#findComment-6233080
Share on other sites

yeh i put in a drain here

post-44390-0-24880700-1329134269_thumb.jpg

which helped quite a bit but now its mainly around the front of the house (high ground) and the existing stormwater pipes have been concreted over (according to house plans)

i do have an electric eel like this

http://www.ebay.com.au/itm/20mm-100mm-Dia-Electric-Plumbing-Sewage-Drain-Pipe-Cleaner-Machine-S-/270906035928?pt=AU_Building_Materials&hash=item3f13420ed8

however the cutting head on it is not... good enough

Link to comment
https://www.sau.com.au/forums/topic/391571-plumbers/#findComment-6233186
Share on other sites

The camera option maybe worth while mate if the water still isn't getting away if its tree roots blocking the line try another head like the spiral looking head which will screw itself into the roots and hopefully you can drag them out

Link to comment
https://www.sau.com.au/forums/topic/391571-plumbers/#findComment-6233224
Share on other sites

had a similar problem and I am below street level. two runs of 5" pipe down both sides of the property with 4 square drains down each side of the house . it used to take 3-4 min of solid rain to flood the place. now its 30-40min of the same rain. I think I am 2-3 ft lower than the street.

took two of us about a week to do and about $500 in materials.

28335_1468938686693_1330376598_31285995_5765859_n.jpg

28335_1470140596740_1330376598_31288769_804350_n.jpg

30635_1480334811589_1330376598_31312793_7656898_n.jpg

30635_1480542256775_1330376598_31313698_5399846_n.jpg

used a fair bit of sock and ag pipe as well. that and a decent layer of crushed rock about 6-10" under the top soil. the ditch is FULL of crushed rock as well. using that in itself drains that area quite well.

does that help?

Link to comment
https://www.sau.com.au/forums/topic/391571-plumbers/#findComment-6233257
Share on other sites

that does help chris thanks

but the problem with my place is that both sides of the house have quite a few large palm trees (that i want to get rid of anyway), both sides have a fence and a fair bit of concrete...

its not the work thats the problem but the lay of the land.

gonna have to pull some trees down first.

that last image, are those flex pipes tied in to your downpipes?

so who here is a tree lopper? :P

Link to comment
https://www.sau.com.au/forums/topic/391571-plumbers/#findComment-6233405
Share on other sites

that does help chris thanks

but the problem with my place is that both sides of the house have quite a few large palm trees (that i want to get rid of anyway), both sides have a fence and a fair bit of concrete...

its not the work thats the problem but the lay of the land.

gonna have to pull some trees down first.

that last image, are those flex pipes tied in to your downpipes?

so who here is a tree lopper? :P

yes.

the whole lot feeds into those pipes. the down pipes, ag pipe and yard drains.

the original 3" main pipe would not handle all of it. the 5" does.

Link to comment
https://www.sau.com.au/forums/topic/391571-plumbers/#findComment-6233423
Share on other sites

all of that black flex pipe and sock is crossed about every 15ft or so into a + fashion. it all terminates at the one point in the last photo.

the result is a fairly quick draining yard.

Link to comment
https://www.sau.com.au/forums/topic/391571-plumbers/#findComment-6234782
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Nah, that is hella wrong. If I do a simple linear between 150°C (0.407v) and 50°C (2.98v) I get the formula Temperature = -38.8651*voltage + 165.8181 It is perfectly correct at 50 and 150, but it is as much as 20° out in the region of 110°C, because the actual data is significantly non-linear there. It is no more than 4° out down at the lowest temperatures, but is is seriously shit almost everywhere. I cannot believe that the instruction is to do a 2 point linear fit. I would say the method I used previously would have to be better.
    • When I said "wiring diagram", I meant the car's wiring diagram. You need to understand how and when 12V appears on certain wires/terminals, when 0V is allowed to appear on certain wires/terminals (which is the difference between supply side switching, and earth side switching), for the way that the car is supposed to work without the immobiliser. Then you start looking for those voltages in the appropriate places at the appropriate times (ie, relay terminals, ECU terminals, fuel pump terminals, at different ignition switch positions, and at times such as "immediately after switching to ON" and "say, 5-10s after switching to ON". You will find that you are not getting what you need when and where you need it, and because you understand what you need and when, from working through the wiring diagram, you can then likely work out why you're not getting it. And that will lead you to the mess that has been made of the associated wires around the immobiliser. But seriously, there is no way that we will be able to find or lead you to the fault from here. You will have to do it at the car, because it will be something f**ked up, and there are a near infinite number of ways for it to be f**ked up. The wiring diagram will give you wire colours and pin numbers and so you can do continuity testing and voltage/time probing and start to work out what is right and what is wrong. I can only close my eyes and imagine a rat's nest of wiring under the dash. You can actually see and touch it.
    • So I found this: https://www.efihardware.com/temperature-sensor-voltage-calculator I didn't know what the pullup resistor is. So I thought if I used my table of known values I could estimate it by putting a value into the pullup resistor, and this should line up with the voltages I had measured. Eventually I got this table out of it by using 210ohms as the pullup resistor. 180C 0.232V - Predicted 175C 0.254V - Predicted 170C 0.278V - Predicted 165C 0.305V - Predicted 160C 0.336V - Predicted 155C 0.369V - Predicted 150C 0.407V - Predicted 145C 0.448V - Predicted 140C 0.494V - Predicted 135C 0.545V - Predicted 130C 0.603V - Predicted 125C 0.668V - Predicted 120C 0.740V - Predicted 115C 0.817V - Predicted 110C 0.914V - Predicted 105C 1.023V - Predicted 100C 1.15V 90C 1.42V - Predicted 85C 1.59V 80C 1.74V 75C 1.94V 70C 2.10V 65C 2.33V 60C 2.56V 58C 2.68V 57C 2.70V 56C 2.74V 55C 2.78V 54C 2.80V 50C 2.98V 49C 3.06V 47C 3.18V 45C 3.23V 43C 3.36V 40C 3.51V 37C 3.67V 35C 3.75V 30C 4.00V As before, the formula in HPTuners is here: https://www.hptuners.com/documentation/files/VCM-Scanner/Content/vcm_scanner/defining_a_transform.htm?Highlight=defining a transform Specifically: In my case I used 50C and 150C, given the sensor is supposedly for that. Input 1 = 2.98V Output 1 = 50C Input 2 = 0.407V Output 2 = 150C (0.407-2.98) / (150-50) -2.573/100 = -0.02573 2.98/-0.02573 + 47.045 = 50 So the corresponding formula should be: (Input / -0.02573) + 47.045 = Output.   If someone can confirm my math it'd be great. Supposedly you can pick any two pairs of the data to make this formula.
    • Well this shows me the fuel pump relay is inside the base of the drivers A Pillar, and goes into the main power wire, and it connects to the ignition. The alarm is.... in the base of the drivers A Pillar. The issue is that I'm not getting 12v to the pump at ignition which tells me that relay isn't being triggered. AVS told me the immobiliser should be open until the ignition is active. So once ignition is active, the immobiliser relay should be telling that fuel pump relay to close which completes the circuit. But I'm not getting voltage at the relay in the rear triggered by the ECU, which leaves me back at the same assumption that that relay was never connected into the immobiliser. This is what I'm trying to verify, that my assumption is the most likely scenario and I'll go back to the alarm tech yet again that he needs to fix his work.      Here is the alarms wiring diagram, so my assumption is IM3A, IM3B, or both, aren't connected or improper. But this is all sealed up, with black wiring, and loomed  
×
×
  • Create New...