Jump to content
SAU Community

Recommended Posts

So a 163,000km RB20det with a leaking headgasket will be available for a case of beer in the next week or so from Noosa.

It will be missing a bunch of shit off it (manifolds, rocker covers, electrics etc)

but if someone wants the block and head, you can have it for a case of beer to the workshop.

Anyone interested?

I can supply more details once it is booked in.

Link to comment
https://www.sau.com.au/forums/topic/391700-rb20det/
Share on other sites

It will be coming out of my car in the first week of March.

It will have the Harmonic balancer on it still.

I'm taking stuff that I can sell off later (PS pump, AC Compressor, Alternator, turbo, manifolds (IN, EX), CAS, TPS, rocker covers, yellow jackets, etc etc)

What's left will be Block, head (all still bolted together with timing belt in place etc), cams, cam gears etc etc.

Link to comment
https://www.sau.com.au/forums/topic/391700-rb20det/#findComment-6239131
Share on other sites

Hey mate I've just relised that ur the one who wants a 25 in ur 32 for around 3k I've left a no. to call on ur other post to give me a call about it, if u can't find my no. here it is 0432369643 call anytime after 3 as i do night shift

Link to comment
https://www.sau.com.au/forums/topic/391700-rb20det/#findComment-6243944
Share on other sites

  • 3 weeks later...

bigjiz - sent you an SMS last night..

The motor is out and will be stripped of bits I want this saturday around lunch time.

Cost of block and head left over is 1 case of Kirin First press - should be around $50 from Dan Murphys.

If anyone else is keen speak up now.

Link to comment
https://www.sau.com.au/forums/topic/391700-rb20det/#findComment-6266008
Share on other sites



  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...