Jump to content
SAU Community

Recommended Posts

Hi,

Clearing out some spare mr30 sedan parts all have come from ti model except the engine which is my original motor from mr30 sedan.

all parts located in Launceston, tas

parts are:

L24e engine complete was running well when removed it from car (3 injectors are brand less then 12 months old) motor is complete aside from waterpump removed it as was a new one.

manual gearbox

2 manual pedal boxes

very new looking power steering pump

mr30 tail lights and headlights

i have a set of jap rear lights but they are cracked at the top on the left side light and leaks water if it rains.

various ti interior pieces (electric window switches etc)

starter motor

spare grill, badges

anything else u may be looking for i might have, will strip motor if some1 wants parts. Make an offer on anything selling to fund new turbo venture on my l24e.

contact me through here or on (03) 63273056

Edited by r3volt21
Link to comment
https://www.sau.com.au/forums/topic/392268-r30-parts-for-sale/
Share on other sites

Hi,

Clearing out some spare mr30 sedan parts all have come from ti model except the engine which is my original motor from mr30 sedan.

all parts located in Launceston, tas

parts are:

L24e engine complete was running well when removed it from car (3 injectors are brand less then 12 months old) motor is complete aside from waterpump removed it as was a new one.

manual gearbox

2 manual pedal boxes

very new looking power steering pump

mr30 tail lights and headlights

i have a set of jap rear lights but they are cracked at the top on the left side light and leaks water if it rains.

various ti interior pieces (electric window switches etc)

starter motor

spare grill, badges

anything else u may be looking for i might have, will strip motor if some1 wants parts. Make an offer on anything selling to fund new turbo venture on my l24e.

contact me through here or on (03) 63273056

PM Sent

Hi,

Clearing out some spare mr30 sedan parts all have come from ti model except the engine which is my original motor from mr30 sedan.

all parts located in Launceston, tas

parts are:

L24e engine complete was running well when removed it from car (3 injectors are brand less then 12 months old) motor is complete aside from waterpump removed it as was a new one.

manual gearbox

2 manual pedal boxes

very new looking power steering pump

mr30 tail lights and headlights

i have a set of jap rear lights but they are cracked at the top on the left side light and leaks water if it rains.

various ti interior pieces (electric window switches etc)

starter motor

spare grill, badges

anything else u may be looking for i might have, will strip motor if some1 wants parts. Make an offer on anything selling to fund new turbo venture on my l24e.

contact me through here or on (03) 63273056

I'm after a N47 cylinder head, complete, i don't need the manifolds

what did you want for it, I can remove it of the engine, if you don't have the tools,

Nigel

Not 100% sure which series the lights are i will take a photo of them with the damage i was talking about (i wont use them as are and cant be bothered fixing) they aren't worth much to me.

Yea i am pretty sure the mr30 motor has the n47 head its at the workshop I use atm so i can pull it off easily not asking much for it hows $100 sound not sure what things are worth I don't want stupid prices for things just trying to be fair.

Will get my mate to check the head stamp tomorrow.

lt2h9.jpg">973ix.jpg">

Thats them sorry about the size, they are in worse condition then i remember originally they were involved in a rear collision on one side still used them for a while till water got in them.

u can see a crack on the rh one aswell now i think my kids have been in the spare room getting into things. no idea if they are even worth anything in this cond.

Yea i am pretty sure the mr30 motor has the n47 head its at the workshop I use atm so i can pull it off easily not asking much for it hows $100 sound not sure what things are worth I don't want stupid prices for things just trying to be fair.

Will get my mate to check the head stamp tomorrow.

$100 sounds ok for a good complete head,

I wont be in Launcestone for another 3-4 week though.

Nigel

Edited by noddle

Hi

I am looking for body parts around the firewall, mainly where the ECU harness goes through. Could you let me know if you want to sell bits or the whole shell and what condidition it is in.

Thanks

John

  • 3 weeks later...
  • 2 weeks later...
  • 2 weeks later...

Just an update on whats left,

mr30 gearbox

tailshaft

various interior parts (rear view mirror, center consoles etc)

electric switches ti ac, power mirrors etc (no window swtiches)

standard aus r30 tailights and headlights

brake master cyl and booster

clutch master cylinder

relay switches, boost sensor etc.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...