Jump to content
SAU Community

Recommended Posts

Okay about six months ago before I used the wrong fuel and detonated my engine I was making 223rwkws (the engine had just been rebuilt, don’t just 8000ks). Since then the engine has been repaired again replacing two pistons and all the rings. After running it in I changed the oil and headed down to Race Pace with Mobil 8000 in the car. After Ben made the necessary adjustments the car put out just 203rwkws. Ben played around for quite some time and couldn’t get the car to match its previous 223rwkw run. The 20rwkw loss is unexplainable since nothing in the car has really changed.

The performance loss is not really the issue though. For some reason the engine was pinging on the dyno, Ben fixed this but whenever I boot it now the “Check” light goes off flashing. Basically the car is still ever so slightly pinging :mad: Any ideas on why the car might be making less power and why a well turned engine with good fuel oil and so on would be pinging?

Link to comment
https://www.sau.com.au/forums/topic/39240-powerloss-pinging/
Share on other sites

well, there are alot of different things that can cause detonation and powerloss.

BOV leaking or leak in one of the intercooler pipes and vacuum lines is the first place I would be looking.

Then you could check the injectors are flowing ok, if you have an adjustable fuel pressure reg, is the pressure the right - its easy for someone to accidentally fark with shit when its sitting on a work bench.

A couple of places that may be worth looking at anyways - alot of stuff can happen to an engine when it is pulled apart.

Link to comment
https://www.sau.com.au/forums/topic/39240-powerloss-pinging/#findComment-797378
Share on other sites

Thanx for the time guys, took it to Ben today and he fixed it ... think it was mostly a dodgy knock sensor. Anyway, the car runs better and safer now. Cant really tell you what he did, just used some of that magic of his!

Link to comment
https://www.sau.com.au/forums/topic/39240-powerloss-pinging/#findComment-798350
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • @GTSBoy Ok so that was the shops problem...they showed R33 rotors on R34 page and i did not know 296 do not fit(and are for R33) Yes i bought "kit" with rotors and pads. Pads are ok(i have GTT calipers front and rear). They have some 324mm but no 310mm. So i dont know if they would fit. I have 17inch LMGT4s So another question. Can i fit those in the rear or they are just "too" big for that?
    • I started removing the tank a while back with the intent to give it a proper clean. Got to a bolt that I couldn't undo completely due to a diff being in the way, so just said f**k it and siphoned the gluggy old fuel out and called it a day. Looking it the tank it looks less corroded than the one in the pics for that billet hanger from Frenchy's anyway. Isn't it the fuel filters job to worry about this stuff? I scraped off most the crusty shit of the hanger but will give it another go before reinstall coz maybe the fuel and return pipes are also full of gunk  
    • Pretty sure it is a common fault. I believe this is the only part you need, but don't quote me as I don't have a V36.  I also believe it is a bit of a pain to change and the device needs to be encoded to the car once it is replaced, so may need someone with the right tools. Buy Genuine Nissan 48700JF00D (48700-JF00D) Lock Set-Steering. Prices, fast shipping, photos, weight - Amayama
    • Pads for R32 GTS-t, R32 GT-R non V-Spec (Sumitomo), R33 GTS-t and R34 GT-t are all interchangeable. R34 GT uses a 2x piston caliper, hence it didn't fit.
    • Checked with amayama and nope, the full S2 manual set is not available anymore. Unsurprising, but still disappointing as the ? on availability gave a glimmer of hope.
×
×
  • Create New...