Jump to content
SAU Community

Recommended Posts

Okay about six months ago before I used the wrong fuel and detonated my engine I was making 223rwkws (the engine had just been rebuilt, don’t just 8000ks). Since then the engine has been repaired again replacing two pistons and all the rings. After running it in I changed the oil and headed down to Race Pace with Mobil 8000 in the car. After Ben made the necessary adjustments the car put out just 203rwkws. Ben played around for quite some time and couldn’t get the car to match its previous 223rwkw run. The 20rwkw loss is unexplainable since nothing in the car has really changed.

The performance loss is not really the issue though. For some reason the engine was pinging on the dyno, Ben fixed this but whenever I boot it now the “Check” light goes off flashing. Basically the car is still ever so slightly pinging :mad: Any ideas on why the car might be making less power and why a well turned engine with good fuel oil and so on would be pinging?

Link to comment
https://www.sau.com.au/forums/topic/39240-powerloss-pinging/
Share on other sites

well, there are alot of different things that can cause detonation and powerloss.

BOV leaking or leak in one of the intercooler pipes and vacuum lines is the first place I would be looking.

Then you could check the injectors are flowing ok, if you have an adjustable fuel pressure reg, is the pressure the right - its easy for someone to accidentally fark with shit when its sitting on a work bench.

A couple of places that may be worth looking at anyways - alot of stuff can happen to an engine when it is pulled apart.

Link to comment
https://www.sau.com.au/forums/topic/39240-powerloss-pinging/#findComment-797378
Share on other sites

Thanx for the time guys, took it to Ben today and he fixed it ... think it was mostly a dodgy knock sensor. Anyway, the car runs better and safer now. Cant really tell you what he did, just used some of that magic of his!

Link to comment
https://www.sau.com.au/forums/topic/39240-powerloss-pinging/#findComment-798350
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
    • I've managed to find this: Nissan_Stagea_AutechVersion260RS (1).pdf
    • I believe @Duncan has given it a crack at Mt Buller before (in actual race conditions)
    • All my Polish car culture insight comes from watching Nightride. So I half expect this to get 1UZ swapped eventually?! Are you going to drive it in winter? I'm always curious how ATTESA would hold up in the snow. There isn't that much opportunity to try it in Australia.  
    • My steering lock unit on my Infiniti G37 has failed. The car is a local 2012 Infiniti G37 (Q60 ) I need to replace the unit My local mechanic said i need to buy a complete steering wheel assembly. Does anybody no any mechanics in Gold Coast or Brisbane who can fix this issue or where i can buy just the Steering lock control unit. Thanks
×
×
  • Create New...