Jump to content
SAU Community

Recommended Posts

does anyone know of any MFD's that show water temp, oil temp, oil pressure, boost. or any others that work with the Stagea? other then a GTR one? will be good if it shows gauges. or bar graphs. or if there is anything else that will work that is not too expensive.

Link to comment
https://www.sau.com.au/forums/topic/392773-mfd/
Share on other sites

going with a nistune ecu now. so will need to work along side that. do u know how hard it is to wire up? or is it consult cable like others?

Informeter plugs into the OBD plug. I'm not sure exactly what it will read on a C34, I've only used mine on an M35.

Link to comment
https://www.sau.com.au/forums/topic/392773-mfd/#findComment-6248441
Share on other sites

Engine temp, injector duty cycle, throttle opening, AFM voltage, ambient temp, RPM, Speed, O2, and a bunch more. With additional sensors you can do oil temp, oil pressure, boost pressure etc.

Link;

http://www.greddy.com/products/electronics/informeter/

Should answer some questions.thumbsup.gif

Link to comment
https://www.sau.com.au/forums/topic/392773-mfd/#findComment-6248577
Share on other sites

HKS CAMP 2. straight OBD port and does video onto a screen (I'm assuming that is your question.)

Just did a google on this, and saw that it needed a Nissan Consult cable for our cars... Now is that to connect our nearly OBD II conection straight into the CAMP2, or does it convert it to an OBD II format that the CAMP 2 normal connector can read?

Now, just say it did convert it to ODB II, does that mean it would work with the Garmin Bluetooth dongle thing....

Got to ask... :thumbsup:

Link to comment
https://www.sau.com.au/forums/topic/392773-mfd/#findComment-6248768
Share on other sites

the M35 might have the OBD connection already. but the C34 i know need the consult cable to enable it to plug into the OBD connector that comes with the camp 2 nd most other diagnostic tools. as the consult plug is not the same. OBD is 16 pin. not sure about the early nissan ones. haven't counted

Link to comment
https://www.sau.com.au/forums/topic/392773-mfd/#findComment-6248774
Share on other sites

Now, just say it did convert it to ODB II, does that mean it would work with the Garmin Bluetooth dongle thing....

Got to ask... :thumbsup:

I'm pretty sure Jetwreck tried one of those in his M35 and it didn't work. Maybe PM him to check?

Link to comment
https://www.sau.com.au/forums/topic/392773-mfd/#findComment-6248780
Share on other sites

Just did a google on this, and saw that it needed a Nissan Consult cable for our cars... Now is that to connect our nearly OBD II conection straight into the CAMP2, or does it convert it to an OBD II format that the CAMP 2 normal connector can read?

Now, just say it did convert it to ODB II, does that mean it would work with the Garmin Bluetooth dongle thing....

Got to ask... :thumbsup:

Yes, the HKS cable plugs straight into the OBD2 port and either the CAMP2 or the Fcon iS. From there it is a video signal out to a screen.

The connection on the HKS equipment is like a modified RJ11 (home phone).

Link to comment
https://www.sau.com.au/forums/topic/392773-mfd/#findComment-6249241
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Nah, don't bother doing any actual measurements on the car. Just go ask the inter-f**king-net.
    • I currently have 18 x 9 +30 on the front with 18 x 10.5 +38 on the rear. Absolutely regretted it. Ended up putting 15 mm spacers on front and 25 mm spacers on the rear. Not to mention the rears were like a mm from hitting the coilovers. Definitely would go more aggressive then what you were originally planning. Keep in mind my guards are rolled and cars fair low so you might possibly need to roll guards depending how aggressive you go and how low the car is. Im not an expert but the 18 x 8.5 +25 18x9.5 +30 Sounds like it would sit much better.
    • Hey guys, sorry i have been researching for a few months and absolutely cannot wrap my head around this. I am about to order some rims to fit my R34 Gtt with coilovers My original plan was to order Rota grid R in 18x8.5 +30 235 40 R18 Fronts 18x9.5 +35 255 35 r18 rears But then the thought in my head said this isnt aggressive enough. I want the most concave spokes i can get without too much of poke and scrubbing   So my thoughts now is  18x8.5 +25 18x9.5 +30   My question is will this be the most aggressive i could get it without any guard rolling and does the type of rim style affect the offset / size.   Thanks everyone.
    • Lower parts are there. On passenger seat, bright yellow bit is the release mount. On drivers, bright yellow bit is the lower buckle for the other side. My bet is lowers are tucked out of the way as much as possible for visuals.
    • I'm guessing its a 4 point harness, 3 of the 4 belts are visible. I'm guessing the hidden belt is tucked down between the seat and door. 
×
×
  • Create New...