Jump to content
SAU Community

Recommended Posts

does anyone know of any MFD's that show water temp, oil temp, oil pressure, boost. or any others that work with the Stagea? other then a GTR one? will be good if it shows gauges. or bar graphs. or if there is anything else that will work that is not too expensive.

Link to comment
https://www.sau.com.au/forums/topic/392773-mfd/
Share on other sites

going with a nistune ecu now. so will need to work along side that. do u know how hard it is to wire up? or is it consult cable like others?

Informeter plugs into the OBD plug. I'm not sure exactly what it will read on a C34, I've only used mine on an M35.

Link to comment
https://www.sau.com.au/forums/topic/392773-mfd/#findComment-6248441
Share on other sites

Engine temp, injector duty cycle, throttle opening, AFM voltage, ambient temp, RPM, Speed, O2, and a bunch more. With additional sensors you can do oil temp, oil pressure, boost pressure etc.

Link;

http://www.greddy.com/products/electronics/informeter/

Should answer some questions.thumbsup.gif

Link to comment
https://www.sau.com.au/forums/topic/392773-mfd/#findComment-6248577
Share on other sites

HKS CAMP 2. straight OBD port and does video onto a screen (I'm assuming that is your question.)

Just did a google on this, and saw that it needed a Nissan Consult cable for our cars... Now is that to connect our nearly OBD II conection straight into the CAMP2, or does it convert it to an OBD II format that the CAMP 2 normal connector can read?

Now, just say it did convert it to ODB II, does that mean it would work with the Garmin Bluetooth dongle thing....

Got to ask... :thumbsup:

Link to comment
https://www.sau.com.au/forums/topic/392773-mfd/#findComment-6248768
Share on other sites

the M35 might have the OBD connection already. but the C34 i know need the consult cable to enable it to plug into the OBD connector that comes with the camp 2 nd most other diagnostic tools. as the consult plug is not the same. OBD is 16 pin. not sure about the early nissan ones. haven't counted

Link to comment
https://www.sau.com.au/forums/topic/392773-mfd/#findComment-6248774
Share on other sites

Now, just say it did convert it to ODB II, does that mean it would work with the Garmin Bluetooth dongle thing....

Got to ask... :thumbsup:

I'm pretty sure Jetwreck tried one of those in his M35 and it didn't work. Maybe PM him to check?

Link to comment
https://www.sau.com.au/forums/topic/392773-mfd/#findComment-6248780
Share on other sites

Just did a google on this, and saw that it needed a Nissan Consult cable for our cars... Now is that to connect our nearly OBD II conection straight into the CAMP2, or does it convert it to an OBD II format that the CAMP 2 normal connector can read?

Now, just say it did convert it to ODB II, does that mean it would work with the Garmin Bluetooth dongle thing....

Got to ask... :thumbsup:

Yes, the HKS cable plugs straight into the OBD2 port and either the CAMP2 or the Fcon iS. From there it is a video signal out to a screen.

The connection on the HKS equipment is like a modified RJ11 (home phone).

Link to comment
https://www.sau.com.au/forums/topic/392773-mfd/#findComment-6249241
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Pads for R32 GTS-t, R32 GT-R non V-Spec (Sumitomo), R33 GTS-t and R34 GT-t are all interchangeable. R34 GT uses a 2x piston caliper, hence it didn't fit.
    • Checked with amayama and nope, the full S2 manual set is not available anymore. Unsurprising, but still disappointing as the ? on availability gave a glimmer of hope.
    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
×
×
  • Create New...