Jump to content
SAU Community

Recommended Posts

i have a complete 180sx shell WITH KEYS i purchased from pickles auctions.

The car is 100% COMPLETE apart from engine+box and engine loom..

i took bare motor and box for myself so everything else you can think off is still on the car eg brakes, sussy, diff, xmembers and gearbox mounts all in the car

as far as i know everything works i never had chance to start car as fmic and computer were not in car when i bought it, but everything looks the goods all windows are good, also lift back boot is fine sunroof perfect, genuine plastic skirts and front bar, fibre glass rear

interior also IS COMPLETE nice and clean 120,000kms on clock

just the front seats have few stains dash was taken out for the loom harness but i dont need it so its back in the car

this car had allot of BS in there like tv and sound system but was all taken out before dropped at pickles, explains the mess

car comes with plates [sR513] and car DOES NOT NEED VIV...15 year rule, so just fix it and register it and done

check on the status check website if u don’t believe me.

I had the receipt with all that proving that it doesn’t need viv and stuff but pickles charge 22$ for reprint so f that if I find it ill post up a copy

take it as it is not parting out so yea 900$ ono

located vic

0411294023 shaun :)

Link to comment
https://www.sau.com.au/forums/topic/393199-95-180sx-rolling-shell/
Share on other sites

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...