Jump to content
SAU Community

Lost My R34 Gtt Keys

drgnball34

By drgnball34,
in Western Australia

 Share

Recommended Posts

Boss-zilla Mentor

Boss-zilla

Posted
Posted

flat bed tow truck?

that is unless you want to make it look like you are stealing your own car (window>bonnect>cut batt>etc)

or if you know who put the alarm in they may be able to help by pass it but still will be hard to move with out the key in the barrel.

Hanaldo Grand Master

Hanaldo

Posted
Posted

Speak to a lock smith, they can get into anything they want. The dead-lock broke on the front door of my house so I arranged for a lock smith to come have a look at it. However I was actually away on holiday with nobody at home when I got a phone call from him saying he was at my house to fix the lock. Told him I was away for 2 weeks and he said no problem, he'll just let himself in and fix it anyway.

Scary thought, but there you go. Although I don't know if the same applies for cars...

Boss-zilla Mentor

Boss-zilla

Posted
Posted

barrel and all locks if you want to do it correctly but most people only do the barrel and drivers door lock.

Also is the car locked? seems a silly question but for all i know its in a shed unlocked and you have lost the key. Locksmith will help you get into it them replace the items with new key's.

gtsttrk Mentor

gtsttrk

Posted
Posted

barrel and all locks if you want to do it correctly but most people only do the barrel and drivers door lock.

Also is the car locked? seems a silly question but for all i know its in a shed unlocked and you have lost the key. Locksmith will help you get into it them replace the items with new key's.

Yeah it's fully locked. Not sure if there's any truth but I heard that of you remove the lock barrell there's a code on it that Nissan can use to replicate the key?

Also any ideas on an estimate for the new barrel, lock and key?

  • 1 month later...
drgnball34 Rising Star

drgnball34

Posted
  • Author
Posted

Update guys. Got mobile locksmith to come out and cut a new key. My car dosent have chip in key thank god! Then towed to to auto electrician to re code alarm. That was ok could arm/disarm and crank over engine but couldn't start. The fuel pumps are getting no feed. Guy who installed my alarm did such a good job that any tampering/altering to system wouldn't work. Auto boys can't figure out what he did. Apparently my ecu is not giving feed to pumps. Alarm guy I can't get hold off was over 3 years ago and he was mobile service.

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      S1 rb25/s14 starting problem

      By MBS206 · Posted

      Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
    • DraftySquash
      Looking for someone with a R34 front bar

      By DraftySquash · Posted

      Final update!!! Got the front bar fitted and sprayed and all sorted now. My cutouts worked great and the indicators aren’t just falling off. 😂  
    • Dose Pipe Sutututu
      new 1.5 LSD issues/concerns

      By Dose Pipe Sutututu · Posted

      Is this a brand new LSD? if so, have you followed any break/bed in procedure for it? Usually involves heaps of figure 8 patterns, a fluid flush.
×
×
  • Create New...