Jump to content
SAU Community

Recommended Posts

Hey guys.

I am trying to bring my R32 Gtr up to immaculate condition interior wise.

These are the parts i am after. i am after as good as possible quality.

- cluster surround, also indicator stalk surround

- interior door handles and surround

- rear window/roof lining trim

- window top seals

- AC vents middle and left, need to be perfect or i dont want them.

- lots of other little pieices that i cant think of.

The quality needs to be there, this is basically to make my car perfect.

pls pm or post what you have, we can look at photos and go from there.

JD

Link to comment
https://www.sau.com.au/forums/topic/393332-r32-gtr-interior-parts/
Share on other sites

not 100% sure mate.

if you swing me some pics to [email protected] i can have a look see and see whether they will work.

Its more the colours i think that were immediately different and trim quality level.

most of the garnished pillars lining etc should be same same.. also the colour needs to be same as currently in there.

Might need to upload some pics so i can be more descriptive of what im after.

cheers

Hey guys.

I am trying to bring my R32 Gtr up to immaculate condition interior wise.

These are the parts i am after. i am after as good as possible quality.

- cluster surround, also indicator stalk surround

- interior door handles and surround

- rear window/roof lining trim

- window top seals

- AC vents middle and left, need to be perfect or i dont want them.

- lots of other little pieices that i cant think of.

The quality needs to be there, this is basically to make my car perfect.

pls pm or post what you have, we can look at photos and go from there.

JD

i've definitely got a perfect centre vent and a few sets of steering wheel surround plastics off the top of my head.... can have a look for the other bits over the weekend if ou want

i'm in sydney

pete

i've definitely got a perfect centre vent and a few sets of steering wheel surround plastics off the top of my head.... can have a look for the other bits over the weekend if ou want

i'm in sydney

pete

Thanks mate..

would appreciate that.. looking for as close to perfect as possible. think im ok for vents, RHD has then for really cheap brand new so might be easier.

Still looking into replacing the drive shafts. havent forgotten bout your offer. just need time to get the mechanic to have a quick look again and double check.

cheers mate.

Thanks mate..

would appreciate that.. looking for as close to perfect as possible. think im ok for vents, RHD has then for really cheap brand new so might be easier.

Still looking into replacing the drive shafts. havent forgotten bout your offer. just need time to get the mechanic to have a quick look again and double check.

cheers mate.

righto, of all the gtr stuff laying around in the shed it's probably not as perfect as you want it

the centre vent i have is perfect in the sense that it's unbroken and the fins are perfect, but it has a tiny mark on the front

happy to pm a pic if you want to check it out

pete

  • 3 weeks later...

+2 for BIGBOSS. Got some immaculate stuff from him recently.

Check his FS thread he had all the parts you mentioned (in pics).

Maguires also put out a good product to bring trim back to new

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I'm actually not sure - I think it was "Stealth Performance" (It really is near impossible to find a FEMALE 1/8BSPT to 1/8NPT male at ALL) but having the thing leveraged on a 90 degree angle on a small aluminium fitting is not too smart. Also in not too smart, I've drilled out the center of the broken fitting so there's maybe 0.00001mm of thread to bite into, so yeah. I may have to get it drilled/tapped/plugged entirely. Given I could conceivably tap a thread/adapter/pressure line in any point in the oil system I suppose it's feasible to run a line to the Nissan Sensor to keep the dash working. Do these exist in AN fittings and the like? Like an AN fitting that has a NPT (or other?) thread as well for putting a sensor in?
    • I would agree.  There will be an amount of boost you could run safely with an otherwise factory system, but it would be low enough to not be worth the cost.  And if you are reliving your 20s, you know a 'little bit' was never enough. Personally, if I didn't want to spend the money, then stick with NA bolt-ons, and maybe a tune.
    • Fuark, at least the motor survived. What brand was the fitting that snapped?
    • Wrong question. There's no point in spending the rather large sum of cash and effort to add turbo, without taking it to the "sensible" limit of the motor itself. If you have to upgrade injectors, etc, then so be it. That is a tiny fraction of what it will cost you to turbo it.
    • Measure voltage at the starter solenoid terminal when the key is at start and it has clicked. If it is really low, then the suspicion falls on the ignition switch (contacts or wiring thereof) as causing a voltage drop instead of sending enough volts to throw the solenoid all the way to engage the starter itself. If it is a decent voltage, then the suspicion is on the solenoid. Might have s horted coil, or might hva dirty contacts. Rip the starter off, dismantle, clean up contacts and inspect winding. It might not be possible to see if there is a short in the winding though. I have a spare starter here that I could measure the resistance of the coil, as a guide to about what it should be, if you need a comparison. <parts hoarder>No you cannot have it.</parts hoarder>
×
×
  • Create New...