Jump to content
SAU Community

4 Wheel Steering (Hicas)

elektrikgt
 Share

Recommended Posts

elektrikgt Apprentice

elektrikgt

Posted
Posted

Hi guys,

I have been looking at a few r33 gts-t and I came across one that looks quite good. The one issue I had with it was when reading about it they stated it had "4 wheel steering" which from a quick google search explained it to be HICAS.

My question is did all r33's come out with this? I seem to remember that the cars that had this feature were more costly to repair and modify? Or am I just wrong?

The model of the car is a 1993 Nissan Skyline HR33 2D Coupe.

Any help is appreciated, thanks thumbsup.gif

(Also wasn't sure if this should be general discussion or drive train)

Link to comment
https://www.sau.com.au/forums/topic/393395-4-wheel-steering-hicas/
Share on other sites
SKITTLES Experienced

SKITTLES

Posted
Posted (edited)

It's to improve handling around a track apparently.

Grab a lock bar, weld your diff, win at life.

Just tripple check it exists before you buy the bar.. I've had two N/A 33GTS's, same year model except one had a sunroof, no hicas or ABS and the other had no sunroof, hicas, ABS and more power.

Just pointing out that there are some differences...

Edited by SKITTLES
blind_elk Grand Master

blind_elk

Posted
Posted

It's to improve handling around a track apparently.

Last place you want it. The Gibson Nissan Works GTRs had the HICAS removed because they found that if you suddenly backed off in a corner the HICAS became confused and could turn the car around.

Don't understand what everyone has against HICAS - I've never had a problem with it. Maybe you guys just aren't up to driving a car with active steering.

joeyjoejoejuniorshabadoo Grand Master

joeyjoejoejuniorshabadoo

Posted
Posted

Last place you want it. The Gibson Nissan Works GTRs had the HICAS removed because they found that if you suddenly backed off in a corner the HICAS became confused and could turn the car around.

Don't understand what everyone has against HICAS - I've never had a problem with it. Maybe you guys just aren't up to driving a car with active steering.

i cant help but feel you kind answered your own question there....

elektrikgt Apprentice

elektrikgt

Posted
  • Author
Posted

It's to improve handling around a track apparently.

Grab a lock bar, weld your diff, win at life.

Just tripple check it exists before you buy the bar.. I've had two N/A 33GTS's, same year model except one had a sunroof, no hicas or ABS and the other had no sunroof, hicas, ABS and more power.

Just pointing out that there are some differences...

Thanks Skittles, I will definitely check them over. I had a look at my mates r32 the other day and that had hicas on it. Was good to see in person what exactly it is.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • brillo
      Leak from Tokico BM50 Brake Master Cylinder

      By brillo · Posted

      Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      PXL_20250828_063541093.TS.mp4
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • PranK
      R35 GT-R production ends after 18 years

      By PranK · Posted

    • SteveL
      Leak from Tokico BM50 Brake Master Cylinder

      By SteveL · Posted

      I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...