Jump to content
SAU Community

Recommended Posts

2nd Owner in Aus

25GT-t Sedan

*****TURBO******

NSW Rego expires end of August

Triptronic Auto

MORE INFO HERE

Viper 2 way alarm with Turbo Timer and Remote Start.

125,000 kms.

Runs Sweet, never missed a beat, been a great car, but family has outgrown.

front & Rear tyres about 6 months old with heaps left.

Never been modified.

Car has Billstein Shocks all round and handles like a dream.

$8,500 ONO

r34sed-5.jpg

r34-sed4.jpg

r34sed-3.jpg

r34sed-2.jpg

r34sed-1.jpg

We are not desperate to sell, just would like to upgrade to larger more family oriented cars.

Located Southern NSW.

Cheers Webber

Link to comment
https://www.sau.com.au/forums/topic/393724-forsale-r34-gtt-auto-sedan-mrs-car/
Share on other sites

Yes it dosn't sit perfect. if anything the latch probably does need adjusting.

But this car isn't a $10k+ car like the other Turbo ones are.

Car is not "perfect" by any means, but if you want a cheap reliable TURBO 4 door R34 that would clean up cheaply- it is definaltly worth a look. There are a couple of small dings/dints around the body also that didn't show up in the photos. and the blue mark on the front bar (which would rub off). I will have a look and see if i can adjust the boot a little more if you like.

Cheers.

Sorry to hear about your car Blitz-26. Were you insured?

yeah she is fairly gone now.... had a 4x4 sitting in my back seat basically .... yeah i;ll get market value and keep the wreck cause the front and inside and engine etc is in good nick still sad to see it the way it is now.....:closedeyes:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...