Jump to content
SAU Community

Recommended Posts

I have set of height and damper adjustable coilovers to suit r33/34gtr, in very good condition and not as harsh as many but still give very good handling $900, will post pics soon

these can also fit r34 gtt, the rears are perfect and the fronts with my supplied spacer plate will fit fine but are very low and scrape slightly on hard lock, but if you like it low and are carefull they will be ok

will ship at buyers expence, email [email protected] for direct pics

also have a set of brand new r34 gtt shocks with springs $150neg

r34 gtr front shocks and springs $150neg

rb25 plenum lower half runners $50

rb25 crossover pipe with BOV $50

std cam gear rb $20

rb25 throttle body no tps,$40

rb20 throttle body no tps $40

have other stuff will post soon

Want to swap the coil overs with lowell or whatever my lowered springs are (australian made according to my friend) plus cash? It's off r34 gt-t

no sorry dont have the 34 anymore so dont need any shocks

the ride is firm and handles very well, not as harsh as some cars with tein coilovers i have ridden in but thats just my opinion, very hard make deffinate comment with so may variables

  • 2 weeks later...

Hi Clint,

When you say they are low (front) is that with or without your spacer? I think they are actually R Tune as the S Tune are not height adjustable according to the Nismo site.

Then again I could be wrong, either way, a great set of undercarriage

Cheers

Muz

Hi Clint,

I would love the rears but the fronts are going to be tooooooo low for mine. Nismo site says R Tune = 9 on the front and 8 on the rear, S Tune = 6.8 on front and 4.6 on the rear.

Cheers and good luck with the sale Clint

Muz

  • 2 weeks later...

So they are still TOO low on the highest setting - at the front end?

I thought being adjustable [height] you would be able to set them at a nice comfortable level :confused:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...