Jump to content
SAU Community

Recommended Posts

Hey

I don't have really any knowledge on skylines its a car that i've admired and recently purchased one 1995 R33 GTR with 49,000 on the clock

I took it for a test drive, drove really well, smooth gear changing no clunks or anything... there was only one problem clutch bearing which the seller said would have to be replaced.

The body and interior are immaculate.

After i got it home gave it a clean i took it to the mechanics the next day, i got a call that afternoon with a list of problems....

Gear box re-build

Clutch Kit

L/H outer CV boot & R/H Inner and outer CV boots

Timing Cover oil leak/timing belt water pump inc coolant

Two new rear tires

I thought ok a few problems, but I'll get them fixed and be done with it.... then i got a call the next day saying that there's barely any pressure in the engine

the back turbo is stuffed.. then he wanted to do a wet/dry test and after that he found out that the pistons where gone and that pretty much i need a new engine/Re-build.

As i said i don't really have any knowledge of these cars, I've gathered that I've bought a lemon of a car.. I'm asking for ADVICE on what i can do, and if any one could help me out..

The mechanic gave me 3 options

Rb25 Re-built ( cheapest option.)

RB26 Rebuilt.

My RB26 Re-built + New Turbos ( Most expensive option )

With a car that supposedly has 49,000 on the clock the engine should still be running in fine order, but from the mechanic said its absolutely thrashed and it has done double the amount of km's that are on the clock.

I've looked into the fair trading act and looked up the odometer being rewound laws and if i can prove some how that has been rewound i'll be compensated for the all the costs of the car and the other party will get a hefty fine

but thats only if i can prove it... otherwise i'm pretty sure i'm out of options and just have to fork money for the rebuild either way i will be doing that.

ANY HELP/ADVICE is appreciated

Cheers

Chris.

Link to comment
https://www.sau.com.au/forums/topic/394198-problems/
Share on other sites

surely IF the engine was so rooted u would have noticed driving it around?

and why would the gearbox need a rebuild if you said it was fine to drive? it either works or it doesn't lol

I THINK your mechanic is taking u for a ride...

Definitely take it somewhere else before you make a decision/ waste money on it

Edited by BrynDETT
Link to comment
https://www.sau.com.au/forums/topic/394198-problems/#findComment-6267658
Share on other sites

Fair Trading is investigating one dealership atm.

ACA is trying to get interviews about another from various sources.

You said the word "Seller" > Did you obtain this car from a dealership or private sale?

Where are you from - and did you buy it local to where you reside?

Link to comment
https://www.sau.com.au/forums/topic/394198-problems/#findComment-6267985
Share on other sites

I THINK your mechanic is taking u for a ride...

Definitely take it somewhere else before you make a decision/ waste money on it

+1, my bullshit detector went off. Get it towed to a skyline specialist, and add your city to your profile so we can suggest some options.

Also;

- If the rear turbo was dead, it would have made no boost. It is possible that the rear turbo let go while the mechanic had it, but that's not the mechanics fault. Sometimes when the rear turbo goes it kills the motor.

- suggesting an R25 rebuild for a GTR is retarded

- dont trust the kms on the speedo - its almost certainly not accurate, but you've got almost no chance of proving that its been done or who did it

- Please PM me the name of this workshop (you can't post it publicly on this forum).

Link to comment
https://www.sau.com.au/forums/topic/394198-problems/#findComment-6268011
Share on other sites

And Bryn & Adam, fancy being done over by both a seller and a mechanic within say a month!!!

That would piss me off big time!!! :domokun:

Yes, one can't tell who the culprit was that tampered with the odometer.

The car must be taken to a RB engine specialist, as Adam says.

Link to comment
https://www.sau.com.au/forums/topic/394198-problems/#findComment-6268048
Share on other sites

Thanks for the quick replies guys,

I'm from Hornsby in Sydney.

As for taking it to an RB specialist, could you please inbox me with the name of the company and i'll try and get the car there during the week.

MrStabby - PM Sent

Link to comment
https://www.sau.com.au/forums/topic/394198-problems/#findComment-6268132
Share on other sites

I'm from Hornsby in Sydney.

As for taking it to an RB specialist, could you please inbox me with the name of the company and i'll try and get the car there during the week.

MrStabby - PM Sent

PM sent. If anyone knows of a good shop anywhere near Hornsby please make a suggestion, because I dont know of any in that area. There's a couple of just ok ones in the Hills district but I wouldn't go as far as to recommend them.

Link to comment
https://www.sau.com.au/forums/topic/394198-problems/#findComment-6268184
Share on other sites

Hey

I don't have really any knowledge on skylines its a car that i've admired and recently purchased one 1995 R33 GTR with 49,000 on the clock

I took it for a test drive, drove really well, smooth gear changing no clunks or anything... there was only one problem clutch bearing which the seller said would have to be replaced.

The body and interior are immaculate.

After i got it home gave it a clean i took it to the mechanics the next day, i got a call that afternoon with a list of problems....

Gear box re-build

Clutch Kit

L/H outer CV boot & R/H Inner and outer CV boots

Timing Cover oil leak/timing belt water pump inc coolant

Two new rear tires

I thought ok a few problems, but I'll get them fixed and be done with it.... then i got a call the next day saying that there's barely any pressure in the engine

the back turbo is stuffed.. then he wanted to do a wet/dry test and after that he found out that the pistons where gone and that pretty much i need a new engine/Re-build.

As i said i don't really have any knowledge of these cars, I've gathered that I've bought a lemon of a car.. I'm asking for ADVICE on what i can do, and if any one could help me out..

The mechanic gave me 3 options

Rb25 Re-built ( cheapest option.)

RB26 Rebuilt.

My RB26 Re-built + New Turbos ( Most expensive option )

With a car that supposedly has 49,000 on the clock the engine should still be running in fine order, but from the mechanic said its absolutely thrashed and it has done double the amount of km's that are on the clock.

I've looked into the fair trading act and looked up the odometer being rewound laws and if i can prove some how that has been rewound i'll be compensated for the all the costs of the car and the other party will get a hefty fine

but thats only if i can prove it... otherwise i'm pretty sure i'm out of options and just have to fork money for the rebuild either way i will be doing that.

ANY HELP/ADVICE is appreciated

Cheers

Chris.

Wow mate, what a bit of bad luck.

It sounds like you bought the car with no RWC? or what ever they are called in NSW?

If you DID however purchase it from a dealer, than the issues should be covered by them. If how ever you purchased it privately, AND there WAS a RWC supplied, than you need to contact the business or inspector who gave it the tick, and start asking some very serious questions.

Otherwise, if buying an unroadworthy car, ALWAYS get it inspected before purchase. People who claim to be selling a cur unreg or with no RWC as they "dont have time" or "it just needs new brake pads to pass" are full of shit.

But you dont need hear this mate, im sure you realise the very expensive mistake you have made.

Link to comment
https://www.sau.com.au/forums/topic/394198-problems/#findComment-6269984
Share on other sites

As much as there was 19,000+ of them made, it is highly doubtful that a car from the first run of GTRs being 17 years old and having been imported to another country would have 49,000 genuine KMs. This is why you can still buy a thrashed out GTS25T with only 120,000ks on the clock that has been in the country for near on ten years.

Situation is rough mate.

Definitely get a second or even third opinion and good luck with your problem.

Link to comment
https://www.sau.com.au/forums/topic/394198-problems/#findComment-6270507
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thanks everyone for the replies and suggestions. Got the seats out (hoping I could find some existing grommets but no such luck). By tapping and measuring etc. I could figure out where I could drill through if needed. But first I borrowed an inspection camera and managed to go through factory holes in the chassis rail and could see that the captive nut was holding steady which is why it could retighten. So it was indeed a stripped section of thread, so I applied downforce by levering the bolt head with a screwdriver and went slowly back and forth until it came out. Camera helped a lot cos I could monitor that the captive nut was holding tight. Now I just have one very seized main subframe nut to tackle 😅
    • BOVs do have a purpose, if you ever log pressure before and after the throttle body, you will see a spike pre throttle on lift off from a WOT condition. Enough to bend throttle blades / damage e-throttle motors or simple assist in blowing off cooler pipes. FWIW, the above on really applies to those running at least 2 bar of boost. OP shouldn't have an issue, on the other hand, here are some videos of my shit box over a decade ago with some succulent dose with the airbox on and off. That shit box is unrecognisable these days 🫠    
    • I've tried all different combinations of BOVs/ no BOV and stock bypass valves over the years, on gear changes the stock bypass valve seems to get the car back on boost quicker because in part the turbos wheel speed isn't being slowed down by reversion, although they have issues holding boost much over the stock setting. Most aftermarket BOVs you can adjust the spring, tighter will make it open later and close sooner, but in my experience it'll cause a bit of flutter at low load/rpm anyway. I've also got some input into this whole no bov causing turbo wear, never had an issue on any on my turbos HOWEVER, I got my R33 GTST with 200k kms on it, with from what I can see still has the original turbo, no lateral shaft play but has about 4-5mm of play in and out which to me seems like a worn thrust bearing from years (100-150k kms?) of turbo flutter running no bov, so maybe there is some truth to it in the long run. But that'll never stop me loving the Stutututu while I have the car.   OP just wants to know if he can run a atmo vented BOV with no major issues and the answer is YES, plenty of people do it, there's no harm in installing it and seeing how it runs before spending $$$ on an aftermarket ecu, last time I bought a Nistune it was $2400 for install and a tune , unsure of todays prices but you get me. Crazy money to spend just to fix the minor inconvenience of stalling that can be overcome by letting the revs come down to near idle before putting the clutch in or a little bit of throttle to avoid it. You're better off leaving the ecu and tune for after a bigger turbo/injectors have been installed to take full advantage of the tune and get your moneys worth.   Let OP have his Whoosh sound without trying to break his bank haha
    • I see you missed the rest of the conversation where they have benefits, but nothing to do with avoiding breaking turbos, which is what the aftermarket BOV made all the fan boys, tuners, and modders believe was the only purpose for them...
    • But they do so for the other reasons to have a compressor bypass. It's in the name.
×
×
  • Create New...