Jump to content
SAU Community

Recommended Posts

Owner/ Builder of highly modified R31 Nissan Skyline! Fully engineered, Mod plated and road legal with Tasmanian registration. Suit buyer looking to join a car club for track use or someone wanting a unique weekend car.

On the current tune using Bp 98 ultimate fuel power output is 370rwkw (500hp) at 23psi and 290rwkw at 15psi.

all modifications have had meticulous attention to detail and will not disappoint! Genuine enquiries only! Happy to talk to a potential buyer about the full list of details about the car.

$27000 negotiable

post-62163-0-43377000-1331541529_thumb.jpg

post-62163-0-19491100-1331541553_thumb.jpg

post-62163-0-12265800-1331541570_thumb.jpg

post-62163-0-39276600-1331541589_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/394512-highly-modified-r31-nissan-skyline/
Share on other sites

  • 2 weeks later...

Engine - Rb30et, standard crankshaft grub screwed, polished and wider oil pump drive fitted, 1mm oversized hypertec cast pistons, spool h beam conrods, arp rod bolts, mains and headstuds, new genuine nissan rb20det oil pump, 1.5mm tomei oil restrictors in block, ACL race series bearings, gaskets and 3 layer steel headgasket, ASR competition sump, reconditioned rb30 head with oversized stainless valves, performance branded springs and retainers, custom ground cam by tighe cams, 3.5inch exhaust with hi-flow stainless rear muffler

Driveline - Rebuilt OS giken Twin plate clutch and R33 gts-t 5spd gearbox, single piece 3inch tailshaft, rebuilt LSD with 3.89 final drive

Suspension - HSD Coilovers, Whiteline adjustable sway bars, full nolathane bush kit , adjustable caster rods, whiteline strut brace, rebuilt s13 front hubs and s13 lower control arms with new ball joints.

Brakes - Ksport 8 piston front calipers, 330x32mm slotted/vented rotors with ferodo ds2500 pads, rebuilt r31 rear calipers, rda slotted rotors and a1rm pads, stainless braided lines all round runing motul rbf600 brake fluid, standard handbrake with new cables, new PBR 1 inch master cylinder with brace, brake ducts fitted to front for additional cooling

Stunning car and mods! Although I'm looking for an R31 GTS-X, this still sparks an interest. I'm sure it's had $27K spent on it but I think you'll find it hard to sell it for that much. Good Luck though!

that thing is jizz worthy. Worth every cent when you think of it in dollars spent.

Hopefully the right person comes along with a heavy wallet.

You'll be lucky to get $12k for it regardless of how much has been spent on it, the reality is no one who has $20k wants an R31.

Part it out and you'll make way more.

This.

  • 2 weeks later...
  • 3 weeks later...

Hey 'Rolls' why dont you go fag up your boyfriend rather then my thread???? Cheers!

Yes i live in Tasmania 'Maxima' and yes the house in the background was built in 1956 to be exact! off topic a bit ? Haha

Well 'Smkr31' the Turbo set up is,

Borgwarner/airwerks s300sx 83/75 (like a gt35 with a t04z turbine) 6 boost twin entry manifold ceramic coated aswell as the turbine housing, turbosmart 50mm external gate with exit pipe, 3.5inch exhaust with single stainless rear muffler with 4inch outlet.

ID 1000 injectors, 2 x bosch 044's, 4.5L surge, twin -6 supply lines and -8 return with speedflow fitings, SX fuel pressure regulator.

Haltech E11v2 will full loom wiring in including 6 x LS1 coils and a Eboost street control the setup.

Thanks.......

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Have you done the Ignition Sync Wizard in the AEM software?
    • Find out what RPM it was idling at with the IACV unplugged. It's very weird that the rpm didn't change at all, and then it stalled. When it stalls is it nearly like a switch off, like you've turned the engine off? Or is it more stutters and sputters and coughs to death over a few seconds? Or does the RPM just slowly keep going down and down? Have you done a test of trying to start it with the AFM unplugged? Does it still die?     If you Follow Josh's advice on using Nistune to check the voltages (which is a perfect method!) if you see anything out of wack voltage wise, THEN get the multimeter out and read the voltage directly at the sensor. If the two vary, then you're now looking for a wiring issue vs a sensor issue. So be aware, what the ECU sees, may not be what the sensor is actually saying too...
    • You very likely need to get it on a dyno and tune it. My assumption is, you've got an RB25DET tune in it, which has a different manifold, different injectors, and different cams as a minimum. What O2 sensor are you running?   When you say it runs extremely rich from idle all the way to redline, is this just free revving it you see that?
    • I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
    • I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
×
×
  • Create New...