Jump to content
SAU Community

Recommended Posts

If anybody knows wherr i can get a rear end write off of a stagea let me know. Dont need the motor or tranny but will need the body and some interior parts. Will pay $$$$$$$$

With or without wheel arch flares i dont care. Dont care what colour either

Have a few problems/issues that need to be addressed:

-i know i have to change my radiator support but i dont know if the bonnet latch will line up, could i use my V series one or will i have to use the stagea one.

-the blinkers on the V are bumper mounted but fender mounted on the M series, do you just line up the four square things on the cover and twist on on and clip it in the guard, could someone take a photo for me.

-i have factory HID lights, how do i change them over to the M series ones. Do just take the bulbs out like i am changing them and put thr stagea ones in or......

I can get all the parts from nisswreck but trying to avoid it because theyre expensive, more expensive than new from nissan sometimes.

Wants to put a series one nose on. What changed in the series 1-2 facelift, did quater pabels change or just lights, bumper, grill and hood

Edited by Howaitonaito

Have a few problems/issues that need to be addressed:

-i know i have to change my radiator support but i dont know if the bonnet latch will line up, could i use my V series one or will i have to use the stagea one.

-the blinkers on the V are bumper mounted but fender mounted on the M series, do you just line up the four square things on the cover and twist on on and clip it in the guard, could someone take a photo for me.

-i have factory HID lights, how do i change them over to the M series ones. Do just take the bulbs out like i am changing them and put thr stagea ones in or......

not sure about rad support

re: blinkers, they are built into the M headlights and there's another 1 on each of the fenders, i actually forgot whether V has blinkers on the fenders. i think it's just a matter of moving the V bumper blinkers to the M headlight ones, might need to extend the wiring i'd imagine.

re: HID, 98% sure they are the same as M35s, i remember checking my mate's v35 cos he was asking what bulbs he had to buy

I can get all the parts from nisswreck but trying to avoid it because theyre expensive, more expensive than new from nissan sometimes.

Wants to put a series one nose on. What changed in the series 1-2 facelift, did quater pabels change or just lights, bumper, grill and hood

ask iamhe77, he used to have s1 m35 with s2 front end

ive already done all the research and planning on this...

yes, quarter panel indicator looms needs to be extended approx 1 metre. same bulb fitting.

headlight plug should be interchangeable. assuming both are HID of course

you have to swap the bonnet, guards, bumper, rad support, grille, radiator, headlights, splash guards... when all parts are changed the bonnet catch and hinges will line up.

oh and you'll be struggling to get all the bits for under $3000

im placing bets on this never happening ;)

Edited by Deep Dish V35

Engine and tranny would be so expensive i might as well buy a stagea.

The v series already have blinkers in the headlights so the link would just switch over to the blinker inside the M series light.

Im talking about the ones in the corner on the V series bumper near the wheel arch, do the m series ones that are on the gaurd have the same thing were you line up the four things and twiat the cover on.

I rekon i can get the lot for just under 3k.

It will take time. I could sell off my old V series parts atleast then ill get a little bit back. Only the bonnet and headlights are still in good nick (tyres have finch and pulled my gaurds and bumpers is beyond repairable)

Are the turbo and NA radiators the same or will i have to find a NA stagea front cut (which i have found)

Edited by Howaitonaito

as i said before

quarter panel indicator looms needs to be extended approx 1 metre. same bulb fitting.

its a standard T10 twist-in base

you obviously have ALOT more research to do. to transplant the turbo motor and trans requires stripping the sedan to a COMPLETELY BARE shell. the entire electrical loom and dash needs to be swapped aswell - which means seats, carpet, dash, a/c, heater... all need to come out

Edited by Deep Dish V35

i discovered this a little while ago whilst having a conversation with guy who did my transmission service and a friend of mine who works for nissan.......if only you could comply a 250GT four, would be easy as.

@Deep Dish V35, what model stag nose are you thinking of putting on?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...