Jump to content
SAU Community

Recommended Posts

Hey guys,

Ive got a complete R33 manual Series 1 gtst. coupe

The shell has currently been taken back to bare metal for a respray. can sell the shell as a whole or keen to wreck.

Let me know what you need, as it is a complete car.

Also have a complete drivers side door in silver (mint condition)

Located brisbane southside.

0419 743 272

i need wheels!!! are the tyres legal?

Hey mate,

unfortunately all I have is a pair of fronts, a shitload of R33 stockos, and a set of R34 GTT wheels in flat black.

i only need 2 wheels preferably the same for the rear with preferably the same tyres on them and legal.

What just for skidders? don't care to mix and match(doesnt matter 16/17/18? i can see what I have got

how much for 34gtt wheels pm me

$200 bux for the R34 gtt wheels, they are in flat black and one has some gutter rash (big swipe,) just needs more flat black

hey mate are u selling gear box engine ect if so how much

pms sent.

Hey mate,

Box and engine are already sold. have spare bottom end are bare heads but thats are far as I go.

Oh yep, got a bare long with a 125,000 genuine kms on it, 155 psi across all six though she wouldn't part from me unless $1100 was swung my way.

how much would u want for both front brake calipers and rotors?

Pm me.

Hey mate

unfortunately not parting out brakes,

Going to be sold as a complete 5 stud conversion for $500

  • 2 weeks later...


  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...