Jump to content
SAU Community

Recommended Posts

i have an rb30/rb25head spool pistons hi lift hks cams engen made 530hp in my old gtst it did blow bottem end due to oil pump moter is stripd at shop in sydney easten subr i wil swap for 4 wheels to sute my gtr.

Any more info on the engine?

Does it come with manifolds?

Turbo?

Injectors?

What rods were used?

What are the bores like?

Any pics?

And what type of wheels are you after?

Size?

Brand?

With or without tyres?

i have an rb30/rb25head spool pistons hi lift hks cams engen made 530hp in my old gtst it did blow bottem end due to oil pump moter is stripd at shop in sydney easten subr i wil swap for 4 wheels to sute my gtr.

need more info, and can people not spell at all these days??

the head has been rebulit with standerd vavles and springs the cams have 15000kms i put them in the motor after the rebulid was done. the motor done around 10000kms the blew the bottem end block had arp head stud bolts but dosent come with the engen it is stripd down no turbo or fule side of things its just the head and block and parts it has 1mm oversized spoöl pistons std rods high lift hks cams and all bolts to re asembel im look 4 a swap for wheels for my gtr.

do you have photos, receipts of work done, who built it?

why did it blow bottom end so early?

what size wheels do you want?

Where the hell are you?

the motor was runing a gt35/40 high mount with a custom intake and 5inch turbo back exust microtec lt12 28 pound boost. I have sold all theas parts. Now tho the engin had a RB25 oil pump the shop sead that it faild and i dnt have pics the engen is at the work shop in sydney and im in mountdruet

Sorry mate, considering you can't spell mt druitt, which is where you live, I'm starting to think this could be a troll sale?

I seriously doubt your spelling skills are that lacking are they?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...