Jump to content
SAU Community

Recommended Posts

Hey Guys,

As the title suggests got a few standard and aftermarket bits for sale, all items are located on the Gold Coast but can be posted anywhere in Aus at buyers expense. I can be contacted on 0468963471 or at [email protected].

ALL ITEMS ARE FOR R33 GTST SERIES 1

Standard side mount intercooler + hard pipe, elbows and clamps- $50

Series 1 spoiler brake light-perfect condition - $20 (pretty sure I also have the spoiler to go with it in white but will confirm $30)

Standard washer bottle (no cap)- $15

Standard fuel pump + sock (works fine, great for testing/fault finding) - $25

Standard Injectors 370cc? x6 (also great for testing/fault finding-would recommend fitting new pindle caps for permanent use approx $10) - $50

Standard ECU manual - $100

Standard coil packs x6 (some showing signs of wear, again good for testing/fault finding) - $25

Standard gear knob perfect condition- $50

Mesh grille, series 1 or 1.5? (missing badge, looks better without badge IMO :) ) - $50

JJR Cold Air Intake Kit (black)- JJR CAI box assy, + pod filter, adapter and clamp - $100

Autometre Phantom 2 water temp guage (white face) + chrome cup - $30

I will now upload the pics :)

Edited by bsd-gtst
Link to comment
https://www.sau.com.au/forums/topic/396513-r33-gtst-s1-standard-bits-for-sale/
Share on other sites

SORRY FOR THE LATE REPLY GUYS EMAILS ARE NOT UPDATING ME ABOUT POST :( PLEASE PM ME IF I DONT REPLY ON THIS POST :)

WILDERBOY, AAARH 33, YES CAI IS STILL FOR SALE, NOT SURE ON POSTAGE TO ACT I CAN GET A QUOTE

ESPRIT, MY TUNER ADVISED ME THAT THESE COIL PACKS WERE NOT QUITE HANDLING THE POWER I WAS MAKING 200RWKW, NOW THAT I HAVE REPLACED THEM I CAN SEE HEAT MARKS ON A COUPLE OF THEM WHICH I SUSPECT WAS THE PROBLEM, PROBABLY NOT SUITABLE TO USE AS A COMPLETE REPLACEMENT SET, HOWEVER THE OTHERS APPEAR TO BE FINE, MAYBE LOCATE WHICH OF YOURS ARE NOT COPING AND SWAP THEM OUT??

HAZER33, SORRY MATE NO FRONT BAR

GRILLE SOLD :D

just confirming I do also have the series 1 spoiler available in white, $50 complete with light or can seperate if need be.

all items apart from grille are still available :D

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I don't know for sure, but I'd expect them all to be interchangeable given the diff end and hub end don't move/change between any C34 series. Often Nissan will change part numbers and the aftermarket follows those year ranges; but the original part number change doesn't mean other parts won't fit. The change could be a change in material, internal parts or even just supplier. For example, all the RB gearbox to engine bolts are no longer available and there is a new part number instead. The only change is they went from cadmium plated bolts to zinc plated due to the issues manufacturing with Cadmium. They look different but work the same.
    • One year is a bit concerning. Did you try contacting GSP? It says 5 year warranty on the box if I remember correctly. I'm also running their driveshafts on my S2 Stagea.   You could check the part numbers on Amayama for your year. Here's the link for my 1998 which gives the 39100-23U60 part number. Well, that and 39100-23U70. https://www.amayama.com/en/genuine-catalogs/epc/nissan-japan/stagea/wgnc34/6649-rb25det/trans/391 What does it say for yours?
    • I ordered a GSP Front R/H Axle from here - https://justjap.com/products/gsp-premium-front-driveshaft-r-h-nissan-r32-r33-r34-skyline-gtr-stagea-4wd#description It lasted around a year before one of the boots blew out. I'm lowered, but I have GKTech roll center adjusters. One year seems a little premature. I think I'm going to spend the extra money on an OEM cv axle this time. This website - https://tfaspeed.com/collections/nissan-stagea-wgnc34-x-four-parts/products/nissan-stagea-awc34-260rs-rb26-right-front-axle-drive-assembly Makes it sound like the readily available OEM CV axle will only fit 11.1999 Stagea and up (mine is a 2.1997 S1). The JustJap listing didn't mention any years or anything for the GSP axle. Amayama shows '11.1999' and up as well for that part number. As well as 'plastic boot type'. See attached picture. So I guess my question is, does that axle (39100-23U60) really only fit S2 Stagea? It's the front driver side. If it does, I'd love to buy that instead of rolling the dice on another GSP. I've found that OEM one cheaper here: https://www.partsfornissans.com/oem-parts/nismo-jdm-r32-r33-r34-skyline-gtr-r32-gts4-right-front-axle-3910023u60 and here https://www.nissanparts.cc/oem-parts/nismo-shaft-ft-drive-3910023u60 Just a little confused because the JapSpeed listing for the GSP front driver axle doesn't mention any specific years or anything and it fit my S1 Stagea fine. So will 39100-23U60 fit my S1 Stagea even though technically it says '11.1999' and up? What would have changed? Thanks.  
    • Thanks for the info. The only "Issue" I've had with the shifter is I always found the throw between 4th and 6th gear too close. I'm always worried to shift into 4th accidently and sending my motor to the moon. Adam LZ recently came out with a video and stated Serialnine revised their shifters to correct this and will change all the revised parts for 150$. Strangely enough, I contacted Serialnine right after and they denied it and said it's bullshit. I found that strange as he's a distributer. I'll keep this forum post updated on that saga.
    • Yep that is correct. It allows you to adjust the short throw range from what I can tell
×
×
  • Create New...