Jump to content
SAU Community

Recommended Posts

brand spankers hks twin power to suit r33gtst series2 and r34 gtt and r34 gtr with loom to suit all models listed direct plug and play$500 no cheaper nengun sells for $648 plus postage..

hks 3037s pro with stronger internal gate $1200 brand new ( sold car and dont need it anymore)

stainless performance exhaust mainfold for rb25det $200

standard vct head for series 2 rb25det perfect condition $500

standard r33gtst series 2 computer $200

standard rb25det injectorsx6 $150 purple tops.

standard r33 gtst intercooler $150

standard airbox for r33 gtst $100

standard intake manifold r33 gtsts rb25det $150-

q45 throttlebody 90mm complete $150-

splitfire coils 5x for rb26dett r32-r33 $300-

standard rb25det coils x6 $200-

2 standard rb25det exhaust manifolds $50-each straight no cracks.

nismo copy frp side skirts for r33 gtst or gtr $150 for pair unpainted

r33 gtsts rear widebody guards frp $300 for pair unpainted i paid over $500-

zex NOS kit complete nearly new used a couple of times wet system up to 150hp shot with filled bottle and bottle warmer (awesome kit) $500- I paid over $850

i will post some pics tonight.

make me a reasonable offer on all items i might consider it but these prices are VERY CHEAP as you would know.

Very keen on the wide guards. Where are you located? Looking to sort something out. Can you send a pic of the guards to 0411 087 701

Says your PM is full.

Can you please post or PM me pics of the Twin Power module?

Does the kit just have everything it needs to just plug in and go?

  • 2 weeks later...

post-23901-0-36715500-1335405135_thumb.jpgpost-23901-0-74798400-1335405226_thumb.jpg

parts still avaiable for got to mention i have an rb25 vct series 2 head $450 plus postage perfect condition includes cams.

Edited by ax53b70p25

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • What does it look like with highway driving? And yes, I had a similar thought as Duncan. It looks quite similar in my Stagea and I have made myself accept it as normal. Might have to look into it some day  
    • While I was waiting for the new parts to come in for the charge pipe and radiator I decided to do some turbo modification. The drive pressure (exhaust backpressure) was a lot higher that I thought it should be. For 32lbs of boost drive was 55lbs. The turbine housing is a 1.10AR and my turbo builder has suggested to go to a 1.25AR. To test if a larger AR would do anything to reduce drive pressure AND not spend any money I decided to hog out the divider in my current housing. I removed it from the inlet and the whole way through the housing.  After reassembly and testing it doesn't look like this modification did anything for reducing drive pressure or requiring more fuel (making more power). Oh well, it was worth a shot. We'll get some data at the track if it makes it past the 60ft. I also machined a $7 shift knob off Amazon to fit my Stillway shifter since I didn't like the Stillway shift knob. Next on the list was the radiator replacement and fabrication of a new intercooler tube that had no silicon coupler. No pictures of this - I was short on time each night after work to get this done and didn't stop to take pictures.  Next was to get the clutch disks out and replaced. Previously when installing the dogbox I had ordered a set of the same sintered iron disks I had been running because I switched to the 26-spline input shaft. I thought it was odd that they didn't have any markings or brand name on them like all my old disks had but installed them anyway. At the track I could not get the clutch to lock up using my normal strategies. After two track nights I reached out to the clutch manufacturer and ask their thoughts. They said they had to switch the material out because they were having trouble getting the original material and that this new material would not take to being slipped very well.  So out with the first set of 26-spline disks and in with the correct material 26-spline disks. While I had the trans out I added an inspection/service hole. I've wanted one of these for a while. Now I can have a look at things and change the front cover shimming when needed (clutch wear). I hustled and got the clutch change done in a few hours on a Saturday. Hopped in the car and drove home. On the way home I did a 1-3 pull. When shifting from 2nd to 3rd the core plug in the back of the cylinder head popped out and dumped all the coolant. Thankfully I was only 30 seconds from home and coasted it there. Datalog showed nothing unusual and 2.5psi of coolant pressure. That plug has been in there since 1992 but I guess it worked its way out. Pulled the trans AGAIN and replaced the plug, JB welded it in, and made a brace. Also deleted the head drain I had added in during the bearing issue fiasco.  I am currently changing my boost control plumbing to make it cleaner. After that is done I'll make another attempt at getting past the 60.
    • Are you 100% sure this isn't tune related?
    • 140-150 across the board. At this point hoping the grounding harness fixes it. My grounds are all tied to the chassis and none to the battery. For SR and KA that’s never been a problem for me but had a few other guys here and Reddit who told me RB really like a very solid ground setup tied to the battery so going to try that next, I’m stumped if that doesn’t do it. Never had a car have spark and fuel and not fire off before. Only thing I can think is the spark is intermittent/weak because of grounds nothing else really makes sense at this point 
    • I am having close to the same issue. Can you help me with what wire you grounded to get your pump to trigger?
×
×
  • Create New...