Servicing a RB25DE

[CHAYSR]

OK I just nee some info. I'm gunna service my brothers R33 RB25DE.

- How much oil does the engine take (inc. filter)?

- What oil filter does it use? (Z154a??)

- What sort of spark plugs should I use in it?

- What fuel filter does it use?

- What air filter? (stock panel type)

Any help would be great as I want to buy the parts before the weekend to do the job.

Cheers.

[Pva_Glue]

This reminds me....

Good Idea to keep some FAQ in here.

sorry I cant help you exact part numbers.... but I am sure some of us knows very well

[mitchxr8]

My handbook says the oil capacity (over-haul) is 4.8L. Oil filter capacity 0.4L. Coolant capacity 8.5L. The Z145A or a Valvoline V04 for the oil filter. I replaced my air filter with a generic one from supercheap (it's only temporary as the motor is being replcaced next week).

[Genesis®]

- How much oil does the engine take (inc. filter)?

approx 4.5 litres. you will have some leftovers from a 5L bottle anyway.

- What oil filter does it use? (Z154a??)

Ryco Z145a

- What sort of spark plugs should I use in it?

depending on how much you wanna spend. its covered very well in the FAQ section.

- What fuel filter does it use?

get original from NISSAN. just quote your vehicle year and model

- What air filter? (stock panel type)

not sure. but you can easily get it from Repco or Supercheap.

Run a search. It do wonders.

[crooser]

OK I just nee some info. I'm gunna service my brothers R33 RB25DE.

- How much oil does the engine take (inc. filter)?

- What oil filter does it use? (Z154a??)

- What sort of spark plugs should I use in it?

- What fuel filter does it use?

- What air filter? (stock panel type)

Any help would be great as I want to buy the parts before the weekend to do the job.

Cheers.

fuel filter is a Z200 (same as 25det)

for the air filter (panel is same as VL Commonwhore) K&N panel recommended

hope this helps

[CHAYSR]

Thanks guys, this has helped me out heaps.

Much appreciated.

Cheers.

[kiwi_rock]

Where abouts do you guys fill the oil to, to cover the "H" but below the indent on the stick, or to the top of the cross-hatch below the H letter? The difference on mine is about 500ml of oil. I decided to make sure it was dead on the top of the cross-hatch after getting a few seals and gaskets replaced rather than over the H like the mechnics before my oil changes did.

Cheers,

Gavin.