Jump to content
SAU Community

Wts Gt3076R + Oem Manifold / Spacer / Dump Pipe


Recommended Posts

Im selling the below Turbo Kit which is in Used but like NEW condition. Turbo has only done 10,000kms since installed September last year. There is NO shaft play at all.

- The below WILL bolt straight onto a RB25. Studs and gaskets are NOT included. Prefer pickup but if postage is needed it will be at the buyers expense.

Price $2,800.00

What i am selling is;

OEM Manifold / Spacer / GT3076r"Internal Gate"/ Dump pipe to suit 3" / Oil and Water Lines.

- I can also include Silicon hoses and pipeing Turbo side only. *Pipeing was made for AFM*

550HP

* Garrett GT3076R-12 (700382-5012)

* RB Turbine Housing (RB25-GT28) 0.70 A/R

* Hi-Flow of Turbine Housing

* RB Water/ Oil Kit

* Silicon Reducer

* Dump Stud Kit

* Silicon Joiner

* Hose Clamps

* Spacer Plate

* Gasket Kit

* T/E Clamp Kit

* Actuator 16psi

* Actuator Bracket and Rod

If you have any questions please don't hesitate to ask. Thanks.

post-58154-0-91430800-1334538248_thumb.jpg

post-58154-0-95036000-1334538262_thumb.jpg

Yes you probably can. Im selling a straight bolt on setup. Water / oi lines manifold/ dump pipe and piping if wanted. You can't buy that for $1700.00 with the same turbo.

I am chasing $2,800.00 for the setup but that doesn't mean i expect it to sell for that price.

Yes you probably can. Im selling a straight bolt on setup. Water / oi lines manifold/ dump pipe and piping if wanted. You can't buy that for $1700.00 with the same turbo.

I am chasing $2,800.00 for the setup but that doesn't mean i expect it to sell for that price.

you will get alot of scrutiny at that price, just a kind bit of advice

Sriver, Thanks for the advice. As this is the first time i have actually tried to sell something especially that is pretty much BN... I really don't have an idea on what a good price for this setup would be. As im going Top mount with a GT3582r i don't need anything on the exhaust side that's currently there.

Turbo cost me $2,453.00 from Boostn Imports. Nothing wrong with the turbo just after a high mount with external gate.

Cheers.

  • 2 weeks later...

So you were trying too sell for 400$ more then what you paid for it lol?

No what i was trying to do and as i stated above was sell it as a complete bolt on sale. Manifold / Spacer / Turbo / Dump pipe / IC Piping / Clamps / silicon hoses. So if someone purchases this they don't have to stuff around to put it on there car. It should take no more then an hour or 2 to put it on without any problems Please read before you post. Remarks like yours with sarcasm are never appreciated. If your not interested then don't post.

550HP

* Garrett GT3076R-12 (700382-5012)

* RB Turbine Housing (RB25-GT28) 0.70 A/R

* Hi-Flow of Turbine Housing

* RB Water/ Oil Kit

* Silicon Reducer

* Dump Stud Kit

* Silicon Joiner

* Hose Clamps

* Spacer Plate

* Gasket Kit

* T/E Clamp Kit

* Actuator 16psi

* Actuator Bracket and Rod

Is already a kit you can buy brand new for 2400$ from boostn imports, im not being sarcastic just being realistic. Ile give you 1700$ for the lot.

Edited by 51NNA
  • 2 weeks later...


  • Similar Content

  • Latest Posts

    • Actually everyone on the roads was really well behaved. The only person that did any minor tailgating was a local hoon in a Turbo Focus. Unfortunately we weren't going the same way so there was no grand initial D touge battle. Lots of people pulled over and let me through. The amount of "Hey man nice car, omg skyline, nice 34 man woo" was suprising. Like really suprising. Like almost annoying. My partner was obviously surprised, she'd never seen anyone in the real world point out the car/like the car/want to chat about the car before, so to have like 3 people per day mention it was notable, I could finally say SEE? SOMEONE THINKS THEY'RE COOL. Everyone was also pretty suprised about the weather. Every day was dry and about ~13-14C. Mount Wellington had a sign that said they close the gates at 9pm and I was heading up there at about ~7:30. It was VERY apparent that conditions were getting significantly worse by the minute on the way up and down. The road on the mountain was terrible though, it's no driving road. I have various suspension related questions now. Luckily it was only about 20 minutes from where we were staying to the top of the mountain as said Google maps. We only had the 2 nights in Hobart. We went to the Farm Gate Market though which was really good - And went down to the Hastings Thermal springs/caves down there during the day. I'd definitely be up for going back again, so luckily there's a few more sights yet to see. Didn't get to do the west coast/queenstown/cradle mountain so this was supposed to be a 'scouting' trip anyway of sorts if I were to one day do/take part in/organize a more car-focused trip. As for the boat, it wasn't bad. Well it was bad, but not in the way you're thinking. We did the night trip which leaves at 6:45 (though you have to be there ~2 hours earlier) and arrives the next morning at about 6am. There is nothing to do on the ship. If you plan accordingly and bring a book/tablet/show to watch/charger you can just chill out, take some Travacalm and just sleep through it. The food there is an extremely basic buffet that costs $32 a plate, or $14 for a $3 pizza. The way back we had a travel kettle and a few different types of cup noodles and made our own tea/coffee in the room. This was a far superior way to do it. At the very least book one of the rooms with beds. I guess as we were in the off season we didn't have room mates. You get an option for rooms with 4 beds (2x bunks) or a room with just the two bottom beds. There's also some option for a deluxe queen bed but it's much pricer. We've been on sleeper trains in Asia before so we figured this is similar (and it was)
    • You just gotta be really, really, really clear and decisive with what you want your end product to be. 99% of people who want this conversion aren't "I want to run a 295 front tyre!" so they don't really need the widebody. They just want the OEM body to look a little less dumpy, so bonnet, bar, skirts job done with some camber, stretch, slam. It's when you want that, but then decide to pivot later you get big problems. See also if you're willing to get an all in one fibreglass bar, and you're willing to accept fibreglass problems like cracking the entire item on a driveway, instead of just a piece attached to the bottom, etc etc etc. Decide this all before buyin'.
    • After @Kinkstaah debacle, I'd never want to try and get it right 😛
    • The hood lines up with the fenders. The front bar doesn't perfectly line up with the fenders where the wheel arch is. You have to 'squeeze' the front bar 'in' as it wants to naturally flare out and be longer on the sides. There's a few threads where people notice this when they only swap a GTR style bumper and front bar. Unless you have genuine OEM items - you may be better served getting conversion kits. There are GTT bumpers to fit GTR hoods. There are GTR hoods (non genuine) to fit the GTT bracketry. MAY  
×
×
  • Create New...