Jump to content
SAU Community

Recommended Posts

Hey guys, i have 2 C33's and 1 A31 getting parted out, they will be available in about 2 weeks, but just drumming up some interest now for anyone who wants to get in early. I will have confirmation on brands and specs of some of the products that are a little vague atm as soon as they get here. I can do these as packages, just let me know exactly what you're chasing and i'll price you up a better price based on how much you grab at one time!

Located neat Mitcham in SA, can post anywhere in Aus!

R33 RB25 Engine - $1900

with Tomei Poncams

(without injectors/ecu/plennum/turbo)

R33 RB25 Engine - $1400

(without injectors/ecu/turbo)

RB25 Manual Gearbox - $1100

Clutches:

OS Twin Plate Clutch (good condition) - $800

Exedy Super Single - $650

Turbo:

HKS GT2540 Turbo (with return line and elbows etc) - $1100

HKS GT2535 Turbo (with return line and elbows etc) - $1000

Garrett T04E (have matching manifold and gate to match, gate specs TBA) - $800

Accessories:

HKS Exhaust Manifold (Stainless steel) - $600

Oil Cooler with Relocation kit - $600

Z32 AFM - $150

Infiniti 90mm Throttle - $300

Nismo 555cc Injectors - $550

2 Layer Radiator - $200

Aluminium Radiator -$200

R32 GTR Intercooler with Piping - $400

Front mount inercooler with Piping - $250

Greddy Plennum - $900

Oil Catch Can Tank - $100

Aftermarket Front Pipe - $100

Lightened Flywheel - $200

GTR fuel pump - $90

Ecu:

HKS FconV Pro Silver - $400

Apexi Power FC w/ Controller - $1100

Boost controllers:

Blitz SBC-ID - $400

Trust Profec B2 - $350

298437_10150351333548744_733698743_8166504_1946911072_n.jpg

If there's any cool/rare stuff on the laurel shells I'd be interested.

hey mate, there's a bunch of laurel shit coming back, there will be a thread up about that soon, but not 100% sure what's left on it after i got my mate to take a bunch of stuff off before it was sent over for my laurel over there.

awesome, i'm chasing anything thats hard to get over here, front lip, centre console with cupholders,weathershields anything little like that.

Venetians? hahaa

haha i have weathershields on my C33 streeter in Japan, but not sure if i have any coming back, cupholders ill check.

Hey guys, i have 2 C33's and 1 A31 getting parted out, they will be available in about 2 weeks, but just drumming up some interest now for anyone who wants to get in early. I will have confirmation on brands and specs of some of the products that are a little vague atm as soon as they get here. I can do these as packages, just let me know exactly what you're chasing and i'll price you up a better price based on how much you grab at one time!

Located neat Mitcham in SA, can post anywhere in Aus!

R33 RB25 Engine - $1900

with Tomei Poncams

(without injectors/ecu/plennum/turbo)

R33 RB25 Engine - $1400

(without injectors/ecu/turbo)

RB25 Manual Gearbox - $1100

Clutches:

OS Twin Plate Clutch (good condition) - $800

Exedy Super Single - $650

Turbo:

HKS GT2540 Turbo (with return line and elbows etc) - $1100

HKS GT2535 Turbo (with return line and elbows etc) - $1000

Garrett T04E (have matching manifold and gate to match, gate specs TBA) - $800

Accessories:

HKS Exhaust Manifold (Stainless steel) - $600

Oil Cooler with Relocation kit - $600

Z32 AFM - $150

Infiniti 90mm Throttle - $300

Nismo 555cc Injectors - $550

2 Layer Radiator - $200

Aluminium Radiator -$200

R32 GTR Intercooler with Piping - $400

Front mount inercooler with Piping - $250

Greddy Plennum - $900

Oil Catch Can Tank - $100

Aftermarket Front Pipe - $100

Lightened Flywheel - $200

GTR fuel pump - $90

Ecu:

HKS FconV Pro Silver - $400

Apexi Power FC w/ Controller - $1100

Boost controllers:

Blitz SBC-ID - $400

Trust Profec B2 - $350

298437_10150351333548744_733698743_8166504_1946911072_n.jpg

I was wondering if you had a throttle body to suit my 97 R33 gtst S2?

Do I see r33 gtst coilovers

not sure where dude? the ones in the pic are S14 as you can see by the 3 stud pattern and camber tops, not sure if you mean something else?

Hi there. With regards to the OS clutch, is it a push or pull type? I have a 2WD R33 with a push type clutch and am needing a multiple plate unit due to the power output. Can you please include some pics with the plate wear, heat spots & any other issues. Also - any idea on postage to QLD mid coast?

  • 2 weeks later...
  • 2 months later...

Hey guys, i have 2 C33's and 1 A31 getting parted out, they will be available in about 2 weeks, but just drumming up some interest now for anyone who wants to get in early. I will have confirmation on brands and specs of some of the products that are a little vague atm as soon as they get here. I can do these as packages, just let me know exactly what you're chasing and i'll price you up a better price based on how much you grab at one time!

Located neat Mitcham in SA, can post anywhere in Aus!

R33 RB25 Engine - $1400

(without injectors/ecu/turbo)

RB25 Manual Gearbox - $1100

Clutches:

Exedy Super Single - $650

Turbo:

HKS GT2540 Turbo (with return line and elbows etc) - $1100

HKS GT2535 Turbo (with return line and elbows etc) - $1000

Garrett T04E (have matching manifold and gate to match, gate specs TBA) - $800

Accessories:

Oil Cooler with Relocation kit - $500

Z32 AFM - $150

Infiniti 90mm Throttle - $300

Nismo 555cc Injectors - $550

TRUST Intercooler core (rough condition, but works fine) - $200

Front mount inercooler with Piping - $250

Oil Catch Can Tank - $100

Aftermarket Front Pipe - $100

GTR fuel pump - $90

Ecu:

HKS FconV Pro Silver - $400

Apexi Power FC - $1100

Boost controllers:

Blitz SBC-ID - $400

Trust Profec B2 - $350

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...