Jump to content
SAU Community

Difference In Gtr Intercooler Sizes

stiffler

By stiffler,
in Engines & Forced Induction

 Share

Recommended Posts

stiffler Explorer

stiffler

Posted
Posted

I have an r32 gtr with what looks like a standard gtr cooler that has an alloy look in appearance. From my understanding the 32's and 33's came out with black coolers but this one may have been cleaned and doesnt have a temp sensor hole like the 34's have. I recently bought a 34 gtr cooler to put on my car and i noticed it seemed a touch smaller so i whipped out the measuring tape and this is what i found.

r32gtr = 600x290

r34gtr = 600x265

On the forums ppl said that the 34 cooler are a little bit better then the 32 and 33 coolers but i havent found anywhere that it says that the 34 is a touch smaller. The 34 basically has one cooling passage less and fins either side of it which results in the smaller size.

Can someone confirm the sizes for me please?

Link to comment
https://www.sau.com.au/forums/topic/398721-difference-in-gtr-intercooler-sizes/
Share on other sites
infamous_t Veteran

infamous_t

Posted
Posted

The two I've had in my hands to compare:

R32 GTR intercooler, 25 row and around 290mm tall (calsonic sticker)

R33 GTR intercooler, 23 row and about 270mm tall (no noticeable markings)

Other sizes & construction were identical

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Dose Pipe Sutututu
      What brakes on R34 GTT(Europe)

      By Dose Pipe Sutututu · Posted

      Pads for R32 GTS-t, R32 GT-R non V-Spec (Sumitomo), R33 GTS-t and R34 GT-t are all interchangeable. R34 GT uses a 2x piston caliper, hence it didn't fit.
    • soviet_merlin
      WGNC34 - floor mats

      By soviet_merlin · Posted

      Checked with amayama and nope, the full S2 manual set is not available anymore. Unsurprising, but still disappointing as the ? on availability gave a glimmer of hope.
    • joshuaho96
      Tomei gasket

      By joshuaho96 · Posted

      I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • GTSBoy
      What brakes on R34 GTT(Europe)

      By GTSBoy · Posted

      The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
×
×
  • Create New...