Jump to content
SAU Community

Recommended Posts

FOR SALE "my dream car"

R34 GTR M-SPEC (rare only 228 built)

only 56,000kms

Motor only done 6,000kms since build

All work carried out by Croydon Racing Developments

Motor is the full JUN 2.7 race catalog (same set up as the JUN R32 and RH9 R34 claimed their fame with 1000+awhp)

JUN Plenum

CRD JUN race head

CRD 9litre baffled sump

Run in on HKS TO4Z

GReddy alloy radiator

GReddy drag intercooler 160 wide

Tein coin overs

OS Giken quad plate clutch

genuine Titanium exhaust

Volk Gram Light 57F Pro 19x10.5 Pro GOLD

motor is ready for big turbo set up and to go over the 1000hp I was going to 1300hp. That is if the new buyer wants more power

currently 430awkw on Shell 98oct

Motor has never had any higher boost or race fuels.

Any doubts about the car feel free to speak to the guys at Croydon to confirm genuine kms and build was no expense spared.

accident free history

Rego NSW Jan2013

Regretful sale but both toys are going, my R33 GTR V spec 'WAR33R' will be up here next when I get some pics

NO LOW BALLERS or TYRE KICKING TEST PILOTS

$98,000

Justin 0414894884

post-18902-0-97531300-1335528782_thumb.jpg

post-18902-0-46056700-1335528836_thumb.jpg

post-18902-0-23790900-1335528887_thumb.jpg

post-18902-0-29237100-1335528945_thumb.jpg

post-18902-0-71150100-1335528993_thumb.jpg

post-18902-0-98956900-1335529354_thumb.jpg

post-18902-0-92148100-1335529471_thumb.jpg

post-18902-0-88532400-1335529529_thumb.jpg

post-18902-0-24625200-1335529586_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/398787-r34-gtr-m-spec-complete-jun-set-up/
Share on other sites

Yes the 33 is still available. Although It might sell before it gets on here as theres already been a few offers....not to many cars have passed EPA & DECCW and be engineered for the the big single, front mount and airbox.

more info on the R34 GTR M-spec:

JUN 2.7L stroker kit

JUN 280deg. camshafts, retainers and valve springs

JUN oil pump

CRD 9L sump

ARP head studs

JUN main studs

competition engine bearings

Gates timing belt

Mines cam baffle plates

JUN vavle guides

Head fully race ported & polished + machined for oversized valves

ROSS harmonic balancer and pulleys

HKS TO4Z turbo kit

JUN plenum

90mm Infinity throttle body

Ferrera vaves & locks

SARD 1000cc fuel injectors

SARD fuel rail

TRUST 165 wide drag intercooler

TRUST alloy radiator

CRD spec water pump

TRUST blow off valve

OS Giken quad plate clutch

I'd say you can guess close enough the rest.....car has over $80,000 in mods alone

all with only 6000kms on them,

  • 2 weeks later...

for those that asked to separate...... $45,000 for the motor

and non refundable deposit before its removed

Car will then be returned to stock $75,000

So yes cheaper to buy as it is but up to buyer I guess

  • 2 weeks later...

Keen to part with the front seats?

Yep keen to part with front seats but only if you buy rear also. I'll sell them to you for a one off special price $98,000 and will chuck the car in with them for free......

Sex right there, ur gonna regret selling your dream car

I finally got into my 1st GTR "WAR33R" after defeating cancer. I always wanted a tuff all rounder (street, drag & track car) and could look no further then a GTR how ever I truly wanted a R34. Now I have finally full filled my dream 2 times over with my R33 NITTO build and R34 JUN build, only to now be having eye issues. This year I've already had 3 surgeries to re attach my retina try this out

and BTW your awake the whole time. Unfortunately due to this I'm not able to keep cars. Both builds where from built to handle a lot more then I have had the chance to give them but unfortunately they don't pay the bills so since I can enjoy them anymore they must sadly go.
  • 2 weeks later...
  • 3 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You Gregged a whole racetrack!?
    • Look for broken wire or bad connector at the motor. Might not be it, but is worth starting there, as it is easy.
    • Hi everyone, I’m having an issue with my R32 GT-R. Sometimes, when the car goes over a bump or experiences some vibration, the 4WD warning light comes on the dashboard. When I check the code from the control unit in the trunk, it shows Code 19 – ETS Motor. However, everything seems to be working fine — if I turn off the engine and restart the car, the light goes away and everything functions normally. Has anyone experienced this before? Where should I start troubleshooting this issue? Thanks in advance!
    • I'm back from the dyno - again! I went looking for someone who knew LS's and had a roller dyno, to see how it shaped up compared to everything else and confirm the powerband really is peaking where Mr Mamo says it should. TLDR: The dyno result I got this time definitely had the shape of how it feels on the road and finally 'makes sense'. Also we had a bit more time to play with timing on the dyno, it turns out the common practice in LS is to lower the timing around peak torque and restore it to max after. So given a car was on the dyno and mostly dialled in already, it was time for tweaking. Luis at APS is definitely knowledgable when it came to this and had overlays ready to go and was happy to share. If you map out your cylinder airmass you start seeing graphs that look a LOT like the engine's torque curve. The good thing also is if you map out your timing curve when you're avoiding knock... this curve very much looks like the inverse of the airmass curve. The result? Well it's another 10.7kw/14hp kw from where I drove it in at. Pretty much everywhere, too. As to how much this car actually makes in Hub Dyno numbers, American Dyno numbers, or Mainline dyno numbers, I say I don't know and it's gone up ~25kw since I started tinkering lol. It IS interesting how the shorter ratio gears I have aren't scaled right on this dyno - 6840RPM is 199KMH, not 175KMH. I have also seen other printouts here with cars with less mods at much higher "kmh" for their RPM due Commodores having 3.45's or longer (!) rear diff ratios maxing out 4th gear which is the 1:1 gear on the T56. Does this matter? No, not really. The real answer is go to the strip and see what it traps, but: I guess I should have gone last Sunday...
    • 310mm rotors will be avilable from Australia, Japan, and probably a few other places. Nothing for the front can be put on the back.
×
×
  • Create New...