Jump to content
SAU Community

Recommended Posts

Im currently parting out my R34 GTT with GTR runing gear. everything must go.

R34 GTR parts as follow

Gatrag 6 speed gearbox, perfect working order, good meat left on 4wd transfer case. comes with pull type AND push type fork and slave cylinder, 5month old nismo gearbox mount, and support brace, complete with GTR shift knob, AND front prop shaft: $4000

R34 GTR Year 2000 V-spec turbo, perfect with no shaft play $350/pair

STD GTR injectors $200/for 6

Pearl White GTR aluminium bonnet, minnor dent on the front area, fine as is or just a touch up: $500, bargin!

R34 GTR Tail shaft: $200

Light weight flywheel (7kg) and exedy heavy duty single plate clutch: use less than 9 month with light foot, never launch, just bed in. paid $1600, pull type $800

Vspec dash cluster, 25xxx or 26xxxkm on the clock (Rare very low K), no clouds, no marks. Perfect!. $200

Apexi boost controller. with leads. $50

front subframe, $150

Uprights: $150 ea side

Lower and uppper arm: $120 ea side

Steering Rack, 2.5 lock to lock : $150

Sway bar: $50

Front Shaft $120 ea

Or the whole front suspension setup $900

Std R34 gtr intank Fuel Pump. higher flow than pervious model, support up to 280kw awkw no worries, $120

V-spec very little k's travel. $650

V-spec hydroic pump assembly, wiring hardness been modified, suit spare $200

STD rb26 AFM $100

GTR twin turbo 60mm into 70mm front pipe. mines style, very good flow probably the best twin front pipe design. $250

34 gtr fujisubo Full exhaust. Jasma Approved. flows very well and very quite, 80mm main pipe, made over 300kw with this pipe before. $350

CATCO 3" High Flow cat, Brought for $200, selling $80

OEM R34 GTR sideskirt with front guard lower skirt, RHS minior twisted $250

GTR replica full carbon fiber rear wing with OEM height (custom requested for oem height) $350

R32/33 GTR parts:

R32/33 Apexi Power FC, complete with hand controller. a minor scrach on the hand controller but wont affect the readding at all $750

GTR BOV $120/ pair or $70 each.

R32 intercooler $70

Thick full alloy radiator 8 months old, suit R32 $80

Item located doncaster east Melbourne.

PM call or text 0433289998.

cheers

joe

Edited by godsmind

some pics on this thread

http://www.skylinesa...66#entry6333066

Boost controller is actually solenoid only. no actual control unit. sorry for the miss leading.

V-spec R34 diff very little k's travel. $600

Will upload as much pics as i could.

Edited by godsmind

Gatrag 6 speed gearbox, perfect working order, good meat left on 4wd transfer case. comes with pull type AND push type fork and slave cylinder, 5month old nismo gearbox mount, and support brace, complete with GTR shift knob, AND front prop shaft: $4000

R34 GTR Year 2000 V-spec turbo, perfect with no shaft play $350/pair

STD GTR injectors $200/for 6

Pearl White GTR aluminium bonnet, minnor dent on the front area, fine as is or just a touch up: $500, bargin!

R34 GTR Tail shaft: $200

Light weight flywheel (7kg) and exedy heavy duty single plate clutch: use less than 9 month with light foot, never launch, just bed in. paid $1600, pull type $800

Vspec dash cluster, 25xxx or 26xxxkm on the clock (Rare very low K), no clouds, no marks. Perfect!. $200

front subframe, $150

Right hand Upright: $150

Right Lower and uppper arm: $120

Steering Rack, 2.5 lock to lock : $150

Sway bar: $50

Right Front Shaft $120

Std R34 gtr intank Fuel Pump. higher flow than pervious model, support up to 280kw awkw no worries, $120

V-spec Diff very little k's travel. $650

V-spec hydroic pump assembly, wiring hardness been modified, suit spare $200

STD rb26 AFM $100

GTR twin turbo 60mm into 70mm front pipe. mines style, very good flow probably the best twin front pipe design. $250

CATCO 3" High Flow cat, Brought for $200, selling $80

OEM R34 GTR sideskirt with front guard lower skirt, RHS minior twisted $250

GTR replica full carbon fiber rear wing with OEM height (custom requested for oem height) $350

R32/33 Apexi Power FC, complete with hand controller. a minor scrach on the hand controller but wont affect the readding at all $750

GTR BOV $120/ pair or $70 each.

R32 intercooler $70

Thick full alloy radiator 8 months old, suit R32 $80

  • 1 month later...
  • 4 weeks later...

Gatrag 6 speed gearbox, perfect working order, good meat left on 4wd transfer case. comes with pull type AND push type fork and slave cylinder, 5month old nismo gearbox mount, and support brace, complete with GTR shift knob, AND front prop shaft: $4000

R34 GTR Year 2000 V-spec turbo, perfect with no shaft play $350/pair

STD GTR injectors $200/for 6

Pearl White GTR aluminium bonnet, minnor dent on the front area, fine as is or just a touch up: $500, bargin!

R34 GTR Tail shaft: $200

Light weight flywheel (7kg) and exedy heavy duty single plate clutch: use less than 9 month with light foot, never launch, just bed in. paid $1600, pull type $800

Vspec dash cluster, 25xxx or 26xxxkm on the clock (Rare very low K), no clouds, no marks. Perfect!. $200

front subframe, $150

Right hand Upright: $150

Right Lower and uppper arm: $120

Steering Rack, 2.5 lock to lock : $150

Sway bar: $50

Right Front Shaft $120

Std R34 gtr intank Fuel Pump. higher flow than pervious model, support up to 280kw awkw no worries, $120

V-spec Diff very little k's travel. $650

V-spec hydroic pump assembly, wiring hardness been modified, suit spare $200

STD rb26 AFM $100

GTR twin turbo 60mm into 70mm front pipe. mines style, very good flow probably the best twin front pipe design. $250

CATCO 3" High Flow cat, Brought for $200, selling $80

OEM R34 GTR sideskirt with front guard lower skirt, RHS minior twisted $250

GTR replica full carbon fiber rear wing with OEM height (custom requested for oem height) $350

R32/33 Apexi Power FC, complete with hand controller. a minor scrach on the hand controller but wont affect the readding at all $750

GTR BOV $120/ pair or $70 each.

R32 intercooler $70

Thick full alloy radiator 8 months old, suit R32 $80

hey man do u still have the lower controller arm?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...