Jump to content
SAU Community

Recommended Posts

You're apparent advice has to be taken with a grain of salt to be frank. How is it that you have a chip on your shoulder, you weren't involved in my situation nor do you have any vested interest in it. You do seem though to like to post and have a go at people. And then decide they are just trolling and sit back and have a go at them some more. If you can get that worked up over someone who posts details about a situation they have gone through, when it wasn't in any way related to yourself, I'd hate to be around when something happens that is related.

So you had a go at me because I saw an orange light, did not know how long it was orange for, and thus tried to brake, but couldn't' stop before the line, and then went over the line 1 second after it turned red. Then admit you ran a red light yourself and didn't even know you had run a red light until you got a ticket. Keep your advice, it sounds like you need it more than I do.

You've run a red in an area that you claim to be notorious for traffic cams.

1. You ran a red

2. You were aware that the cam was there hence how you knew that it was notorious

3. You keep reiterating the same point seeking a different result.

If you haven't had any fines in all these years, 1 red light slip up isn't going to affect you.

Still failing to see what your point in all this is.

Insanity is repeating the same thing over and over expecting a different result - Einstein

You ran a red and got a fine, stop QQing like a girl and take it like a man - Me

Col Please close this thread before some of the pro trolls decide it's open season.

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • You just need to remove the compressor housing, not the entire turbo. I would not be drilling and tapping anything with the housing still on anyways. 
    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
    • Saw this replica police car based on a Mitsubishi Starion XX parked next to a 'police box' (it's literally a box) in Hirohata, Himeji City in Hyogo prefecture the other day. It's owned by Morii-san who is a local Mitsubishi Starion enthusiast. According to a local radio station blog post, he always wanted to make a police car himself based on ones he saw in his favourite Manga comics.  As it's illegal to modify a car to look like a police car and drive on the road, Morii-san tried many times to get permission from Aboshi police station headquarters nearby. They refused initially by after they got tired of that they granted him permission. However, the car can only be displayed on private property and obviously can't be registered as long as the police livery is present. The car was completed at a cost of 1.5 million yen (US$ 10,000) in addition to the car cost. A location was chosen outside Hirohata Police box where the car can easily been seen from the street. Morii-san has two other Starion road cars, both widebody GSR-VRs.
×
×
  • Create New...