Jump to content
SAU Community

Recommended Posts

Hey Guys,

ok so im fairly new to skylines, i hav and r33 with an rb25det.

It has recently started to act wierd under acceleration but not all the time and not all the way through the rev range.

So for example if i pull away from the lights quicker than normal but not flat out, first gear ok change into second it will be ok as i got up the revs the all of a sudden it will stop accelerating almost like its bogging down, foot will still be down on accelerator but nothing happening. so il clutch down and blip it a few times to clear it up then its ok, then change into third and it will do it again at roughly the same rpm????

But it does not do it all the time, maybe half the time. Im not confident but i was thinking maybe running lean or rich at this point just to a fuel/air sensor or an air volume sensor??

Is this common and specific things to check or clean??

The engine is completely stock apart from a HKS pod filter and a turbo back exhaust, which were both on the car when i bought it 2 months ago.

Greatfull for any info advice or solutions cheers :yes:

Link to comment
https://www.sau.com.au/forums/topic/400099-bogging-down-under-acceleration/
Share on other sites

What kind of boost are you running?

Do you know what rpm it does it at.

When it happens do the revs keep climbing or do they bog down much like the car does.

Could be clutch slip

Could be R&R rich and retarded from running to much boost.

Also could be misfiring

so dry joints on these plugs is a common issue??

It sounds and feels to me like it could well be this or something very similar. Unfortunatly i dont know anybody else near me with a skyline.

But i may try cleaning and re inserting all the plugs??

I have not had any kind of engine warning lights come on, would a sensor issue not trigger this? ie if the afm sensor is playing around with the mixture would the exhaust egr sensor not read faulty??

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
    • Yeah, shame. Maybe  driver's carpet is available 🙏. I am waiting for both amayama and nangun to confirm.
×
×
  • Create New...