Jump to content
SAU Community

Deloom R33 Gts25T Engine Bay

deep_nz

By deep_nz,
in General Maintenance

 Share

Recommended Posts

deep_nz Apprentice

deep_nz

Posted
Posted

Hey guys,

So I have a RB25det R33 and i was wanting to deloom and tidy up the engine bay a bit.

What is the easiest way to deloom and make it look a bit cleaner when i pop the hood?

Just looking at the engine bay is making me more confused on where to begin, everything is so tightly packed together.

Any help will be appreciated! Thanks!

post-92563-0-42416600-1337055406_thumb.jpg

  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/400170-deloom-r33-gts25t-engine-bay/
Share on other sites
deep_nz Apprentice

deep_nz

Posted
  • Author
Posted

i was thinking the same thing.

was trying to find a spot to place my oi catch tank and realised how clustered the engine bay was.. :(

anytips on re wiring and anything that i can just throw out?

Yeah, glad someones on teh same page as me hahah. the AC can come out, that will open up a good amount of space.

The other annoying part is how in a r33 the loom runs through the firewall from behind the ABS. i guess itll have to be alot of rewiring to be done.

75coupe Grand Master

75coupe

Posted
Posted

wait a sec, I was serious in my comments...

but it seems you actually just want to delete stuff, like AC...

just confirm for me 'you want an easy no rewiring way of making the engine bay look uncluttered without having to rewire...?'

no, there is no simple way... rewire it all and relocate the fuse box...

or rip out the engine and replace it with a carburettor engine with no headlights, electric fans... engine bay 'deloomed'

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • TurboTapin
      Why am I hitting a power wall with my stroked RB25?

      By TurboTapin · Posted

      Kelford 246-A2. 262in/272ex. 
    • Adam_ECR33
      Hello sau 👋

      By Adam_ECR33 · Posted

      Thank you, 100% the intent. New coils were due and the 17" sixers look/feel loads better than the stock wheels. The aero options are so spot on.   Thanks for the warm welcome, all!
    • JC71
      98 R34GTT 4k engine stumble

      By JC71 · Posted

      98 r34 gtt Been rocking my latest setup and car running like never before. Have put a good 200 miles on it since all the latest changes and additions. everything is dialed in and have been driving it a bunch.   However, all a sudden last weekend as soon as I pushed throttle passed 4k and the engine stumbles, (slow or fast acceleration) hesitates and doesn’t go above 4100 or so, like a misfire. Everything else seems fine. I had a “good” set of coil packs that I removed from car when I first got it when I changed them over to new coils. I swapped out current ones for those, but no change. I also changed the plugs, no change. Seems to rev over 4 when out of gear with no load just fine no “misfire”, but as soon as its in gear with a load of any kind, it “misfires” as soon as rpm drop back below 4 k it runs perfectly, smooth, starts, restarts and drives fine as long as I keep it below 4 k while in gear. All readings look fine, no CEL   Any idea as to what could all a sudden cause an issue when pushing rpms passed 4 k?
    • r32-25t
      Why am I hitting a power wall with my stroked RB25?

      By r32-25t · Posted

      When you say your cams are 272/262 is that 272in and 262ex?
    • Kinkstaah
      Nismo GT Pro LSD configurations

      By Kinkstaah · Posted

      We're arguing semantics. I am saying 45 accel and a 55 deccel ramp are "2 ways". Even a 45 degree ramp and an 89 degree ramp is "2 ways", because it is literally... two ways. The cusco 55/30 ramp is a 2 way. It's two ways. I get it though - in normal nomenclature a "2 way" would be 45/45 or 55/55 or 60/60 i.e the same locking in both directions. And something like 45/65 would be considered "1.5 way". I would then say if we're getting into the nitty gritty then every locking diff is a "2 way" diff and we should not speak in 1.5, or 2 ways but ramp angles instead. Which ofc if one of those ramp angles is 90deg, that side is not doing any locking. :p So Nismo don't obviously sell 3 things. The fact of the matter that they only sell two items really goes to show that there's a 2 way and a "1,5 way" which is really a 1 way. I believe the actual lockup for the 'adjustability' of the GT pro is really just setting preload for when the ramps actually start locking up. It's not changing how much 'wayness' there is. It is (somehow) horribly explained. People just buy whatever diff and go "locks up good bruh" and that's what ends up on socials forever.  
×
×
  • Create New...