Jump to content
SAU Community

Recommended Posts

Im competing in the dutch time attack championchip with my R32 GTR. (the only time attack R32GTR in holland).

something about the car,

specs:

Build Rb26 engine,

(87mm) close to 2.7liter

Wossner pocketed forged pistons 8.2-1CR

Wossner forged steel con rods ARP bouten

ACL race serie's bearings

cranckshaft ballanced and polished

1.4mm Tomei MLS kop pakking

1.2mm oil restrictor naar cilinderkop

Tomei competition sump baffle kit

extendid sump 8.5liter

external head oil return

Tomei bronze valve guides

Tomei Valve retainers and folowers

Tomei B type valve springs 10.85mm

Tomei Procam 270graden 10.25mm lift

Haltech 33mhz boost control kit

Haltech platinum Pro ECU

AET T78-33D Single Turbo with trust 48mm external wastegate

Wiffbitz 3.5'' titanium race exhaust

Apexi 145mm super drag intercooler

Injector dynamics 1000cc injectors

Tomei 280 litre per hour in tank lift pump

Paxton aeromotive fuel pump

Sard Fuel Pressure Regulator

HKS Fuel rail, twin fed 11mm

C's quickshift

OS Giken twin plate clutch

Autosaurus 1 piece lightweight propshaft

Alcon Brake system, 370mm front, 350mm Rear

welded shassis+ Full FIA cage

Custom BC racing suspension system (car is sponsored by BC racing).

8266317.jpg

8249753.jpg

8249752.jpg

4995636.jpg

8247391.jpg

hope you will like it!

..

Edited by Peter de Beus

I have some video's from last years time attack series, but it was with the old mapping running just wastegate pressure 1.2 bar. (250km old engine)and without the titanium exhaust.

Edited by Peter de Beus
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...