Jump to content
SAU Community

Recommended Posts

Im competing in the dutch time attack championchip with my R32 GTR. (the only time attack R32GTR in holland).

something about the car,

specs:

Build Rb26 engine,

(87mm) close to 2.7liter

Wossner pocketed forged pistons 8.2-1CR

Wossner forged steel con rods ARP bouten

ACL race serie's bearings

cranckshaft ballanced and polished

1.4mm Tomei MLS kop pakking

1.2mm oil restrictor naar cilinderkop

Tomei competition sump baffle kit

extendid sump 8.5liter

external head oil return

Tomei bronze valve guides

Tomei Valve retainers and folowers

Tomei B type valve springs 10.85mm

Tomei Procam 270graden 10.25mm lift

Haltech 33mhz boost control kit

Haltech platinum Pro ECU

AET T78-33D Single Turbo with trust 48mm external wastegate

Wiffbitz 3.5'' titanium race exhaust

Apexi 145mm super drag intercooler

Injector dynamics 1000cc injectors

Tomei 280 litre per hour in tank lift pump

Paxton aeromotive fuel pump

Sard Fuel Pressure Regulator

HKS Fuel rail, twin fed 11mm

C's quickshift

OS Giken twin plate clutch

Autosaurus 1 piece lightweight propshaft

Alcon Brake system, 370mm front, 350mm Rear

welded shassis+ Full FIA cage

Custom BC racing suspension system (car is sponsored by BC racing).

8266317.jpg

8249753.jpg

8249752.jpg

4995636.jpg

8247391.jpg

hope you will like it!

..

Edited by Peter de Beus

I have some video's from last years time attack series, but it was with the old mapping running just wastegate pressure 1.2 bar. (250km old engine)and without the titanium exhaust.

Edited by Peter de Beus
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • roof rail delete used to be a thing, they were made locally for a while too
    • I can get more photos of it here soon and I plan to make a thread detailing the process. I received the car this way and it sorely needs refinishing. That is probably the most appealing photo of it. Up close it is fading, cracked, and needs to be re-glued. Depending on their condition I'm on the fence between refinishing or making a new set.  Another angle hiding the pimples and razor pumps  
    • According to this thread the RS4V with build plate RC40 comes with the R200 diff @ 4.083 ratio as well (mine has said RC40 denotation). We may need to check if the axle stubs are the same pattern as well. The auto subframes have longer axles. However I think yours being a later Series 2 as well, we should have the same bolt pattern for the diff stubs. Unless your upgraded rear also has upgraded axles. Either way, I would not be opposed to pulling the covers to check so I can inspect that  fancy rear core  Also I don't have HICAS. I don't believe that should change things but I hope the people here with heaps more experience than me can correct me if I'm wrong   Let me know if you want to attempt to make this work and I can get some pictures of mine from under the car. 
    • It's not that straightforward. For example I have had this code because my ignitor/power transistor wires were unplugged. It knows something is wrong but has no idea what it means. If you want to actually diagnose this I recommend following the service manual flowchart for code 21. Ohm out the harness, coilpacks, inspect the ECU, etc. And again, it's entirely possible for there to be no problem at all but if you're running a different coilpack it'll trigger the code because it doesn't like what it sees.
    • If it (the code) wasn't still current, it should have gone away by itself by now. No, nothing it 10/10. But it is quite likely. Everything else to do with the ignition could still be responsible (which is wires and connectors). The car is an old piece of shit now, so all the wires and connectors are also old pieces of shit.
×
×
  • Create New...