Jump to content
SAU Community

Recommended Posts

Hi Guys,

Today i have on offer parts from my er34 gtt.

location of parts central coast , nsw

first up is R/H xenon Headlight

condition - ok mounting tabs good, no bulbs. ( had previous angel eye mod done by old owner, HID cut out when imported.)

price $ 250

willing to ship or pick up

post-57423-0-50101900-1337242298_thumb.jpgpost-57423-0-04794100-1337242337_thumb.jpg

Next is my old E-Manage Blue

Condition - good - comes with wiring as is was used in my old setup which seen a healthy 192.3 RWKW as a daily - setup on it was done by Chaser motorsports in Melbourne.

Price $ 100

willing to ship or pick up

post-57423-0-06124100-1337242576_thumb.jpgpost-57423-0-40779900-1337242605_thumb.jpg

--- Apexi AVCR

Condition - ok , works ,screen not so good ( comes with all wiring and solenoid and what you see in pictures )

Price $ 70

willing to ship or pick up

post-57423-0-22574300-1337243107_thumb.jpgpost-57423-0-91767100-1337243151_thumb.jpgpost-57423-0-86200500-1337243193_thumb.jpg

hypergear internal wastegate set for 14psi

Condition - new ( ordered for my old setup as plans have changed no longer need it )

price $ 100 ( thats cheaper then hyper gear)

willing to ship or pick up

post-57423-0-87903200-1337243395_thumb.jpg

bride seat rails - only fit R34

L/H - condition - as new fitted to car for 2 days.

price $ 200

post-57423-0-47203100-1337243651_thumb.jpgpost-57423-0-01578400-1337243707_thumb.jpg

R/H - condition - used

price $ 90

post-57423-0-24087000-1337243847_thumb.jpgpost-57423-0-62095700-1337243906_thumb.jpg

willing to ship or pick up

Bride Brix II copies X 2

Condition - as new ( only fitted for 2 days )

Price $ 300 each or $550 for both

willing to ship or pick up

post-57423-0-68850100-1337244222_thumb.jpgpost-57423-0-51125800-1337244295_thumb.jpgpost-57423-0-97001700-1337244358_thumb.jpg

And finally my Apexi Power FC with hand controller

condition - good , hand controller has minor marks ( still in car at the moment so unable to provide photos)

price $ 1100

willing to ship or pick up

Thanks for reading

contract number is 0437800066 ( MSG or call )

or pm me

Hey guys,

i have a few more items up for sale.

greddy profec spec B "black"

condiiton - like new only been installed for 3 months.

price - $320

willing to ship or pick up.

HyperGear ATR.43 G3 spec turbo. internal wastegated

condition - good no shaft play

size 0.70 front 0.82 rear , nissan 6 bolt rear housing.

price $ 800

willing to ship or pick up

custom 3 inch metal intake

allows you to use your stock airbox.r34

price $85

willing to ship or pick up

sard 650cc injectors

condition - good only used for 5000kms'

price - $ 700 ( priced @ well over a 1000 on local websites )

willing to ship or pick up

  • 1 month later...
  • 2 months later...

Hey guys

Still have the headlight , wastegate , seats and bride rails

Also have a stock 34 turbo with op6 rear housing

Asking $300

Open to offers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • https://www.facebook.com/share/p/18rmVb1SKB/ 
    • The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
    • I feel there must have been a FB/insta post and the weekend did not start well at all I hope everyone is all okay
×
×
  • Create New...