Jump to content
SAU Community

Recommended Posts

  • 4 weeks later...

Last weekend i had the first superlap event after fitting the new suspension and brakes.

I wass still running the old tires, just to see what improvement the suspension and brake system woud give.

it saved me 2.5 second, after 20 minutes of driving, so not bad. (4th place).

need some more pratice to get the driving up to wat it was after 7 months ;)

Now its time for some improvements to the suspension, and get some real sticky tyres!

8560156.jpg

8560179.jpg

8560180.jpg

i know the ductape looks shit, have already fitted hood pins!

8560182.jpg

  • 4 weeks later...
  • 2 months later...

sorry havent been online in a while, i´m not going to zandvoort to often, because of the verry thight noise regulations... only 96DB on fly by....

This weekend the car could be seen on the largest tuning show from europe, 100% tuning in Rotterdam...

Created a small time attack erea with some friends!

Below some of the dutch championchip cars:

11187866.jpg

11187864.jpg

11187857.jpg

11187839.jpg

11187838.jpg

11187837.jpg

fitted a new splitter en CF cannard to my front bumper! hopefully gives some extra downforce for next season....

11187858.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • There are black hose clamps as well if you care. Plazmaman for example sells some: https://plazmaman.com/product/black-hose-clamps-premium-quality-stainless-breeze/
    • After using a protractor for an actually accurate assessment of what is required,  and by NOT using my uncalibrated eyeball I worked out I need a 25° silicone bend from the TB ro the MAF, but, my choice was either a 30° or a 23° (23° is a weird spec), so I grabbed the 23° one from Raceworks I also grabbed 1mtr of 3" straight from Just Jap, I needed 350mm, but they only had 300mm, or 1mtr lengths....meh Also ordered a 1/2" hose bulkhead fitting from fleabay, this has a smoothish mushroom looking head (they are designed for below the water line of boats) that will fit inside the bend, the hose bit and threaded bit looks to long, but nothing that a hacksaw cannot fix if required, the hose will then just get jamed on the threaded bit up to the retaining nut Fingers crossed and the unsightly amount of hose clamps will be reduced down to 4 once all the parts arrive 
    • Oil change does not trigger code 21. Code 21 is for coilpacks primary side connection. You can try to clear the code with a battery disconnect, hold down the brake pedal to drain capacitors through the brake lights with the ignition on for 10-15 seconds before you reconnect the battery. I have seen R35 coil conversion permanently cause this code with no ill effects so it might be the resistance it wants to see isn't quite right on one or more coilpacks. Could be inside the ECU, could be the harness, could be a coil. You can test it all if you want or just ignore until the car actually starts misfiring.
    • I forgot you have a Nistune ECU. Use Nistune to do all the tests I mentioned instead of faffing with 30+ year old electrical connectors. You can read MAF volts off that too, there are reference values in the service manual to tell you roughly what it should be in different conditions.
×
×
  • Create New...