Jump to content
SAU Community

Recommended Posts

Unfortunately the time has come for me to sell my Project.

up for Auction is my R33 GTR, its a 1995 Model, 5 speed manual, twin Turbo RB26DET

I have all panels for this besides a Rear Bar.

the engine is complete and runs but one of the lifters is noisy, (i was going to replace them all).

compression is 160 in all 6 Cylinders.

the car just needs a paint job

grab a Bargain

I have everything unplugged and unbolted at the moment as i was getting ready to remove the motor and box to paint the engine bay.

it has a near new super single heavy duty clutch from Direct Clutch Services in Brisbane

Genuine 90000k's

it is missing the front Brembos but the rears are still on there.

contact to be made within 24 hours of Auction ending

payment to be made within 3 days of auction ending

this is an as is where is sale

i reserve the right to remove this listing as it is advertised elswhere

i have plenty more images if you would like to see more please feel free to sms or call me (Brad) 0426 219 900

it has a nismo 320k cluster

there is a Small Dent on the Drivers side just behind the door, Should be noticeable in the images.

front bar has brand new indicator bezzels and a JUN Carbon Front lip to be included if the Sell Price is reasonable.

Turbo back 3 1/2 inch Exhaust

Hks Coil overs

Dash Fascia and Gear Boot Surround has been covered in Carbon Fibre Wrap

Has a Turbo Timer

Interior is Complete and comes with a spare set of GTR Door Cards.

im sure there is some things i may have missed but as i said feel free to call or sms me

Is on eBay with starting price of 2k and buy it now is 11k.

Feel free to make a reasonable offer

$11,000 is a lot of money for it's condition mate. I'd be pretty keen, but by the time i buy a front pair of brembos and finish it off, it will cost me as much as any complete r33 gtr out there with original paint rather then 6 different colours.

Edited by pj-33
  • 1 month later...
  • 4 weeks later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • This looks great! Awesome to have the 5 speed with an LSD in this. The Recaro's look like SR2's or SR3's. It's a shame they've been retrimmed as they would have looked sweet in their original colours. I think I'd want my agent to be a little more up front and informative too. I've never imported but I reckon it would make me a little nervous, so the more info the better.
    • Thanks for doing that Duncan! Makes you a good person in my books. We don't get kangaroos or wombats here. But we have bats and it's similar. AFAIK it's often the mums with a baby attached that get hit because they drop lower when starting from a tree. If you hit an animal, check on it. https://www.ifaw.org/au/resources/wildlife-rescue-app An app to get the closest wildlife rescue contact.
    • My dream is also to have a proper hoist, but I don't think it will ever happen. My quickjack is probably as close as I'll ever get, it really is very good though. 
    • Yeah we keep on in the dailies, it is pretty poor how many animals get hit and the driver leaves without checking....have saved a couple of little ones over the years. Bit of a gruesome job though, pouches generally need to be cut open because they are so tight and often the joey doesn't realise mum is gone so they are still locked onto the teat. I checked the modules in front of the DS wheel where an oil cooler should go.... There is the radar unit - that can go for race use) One of the 2 HX water pumps, the silver cylinder. That needs to be kept but might be able to be relocated But the bad news, the big computer mounted vertically in front of the wheel (blocking any potential air exit) is the electric steering computer. That is required until/unless i do a hydraulic steering conversion, and in CAD based modern car design it is not like I can just pop a big unit like that somewhere else (plus the loom would be too short anywhere else too). So, the passenger side is OK to clear out (just use a smaller washer reservoir, potentially elsewhere), but the DS no beuno
    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
×
×
  • Create New...