Jump to content
SAU Community

Hydraulic Rb25Det...

dayofthedead
 Share

Recommended Posts

The Dan Grand Master

The Dan

Posted
Posted

this is wat happened, when i got my big turbo and injectors all put in and tuned, my tuner didnt put the pintal caps on the end of the injecors, which then causeed the o rings to push out into the fuel rail, which then i had back fire issues and dropping a cylinder, number 6....i took it back then he said its running fine and said i had fuel pressure problems, i then got a new FRP, put that in and then he said, number 6 injector has been modifiied and drilled out which causing it to run like shit (PE 850cc brand new)..then one weekend took out the rail to have a look at injecors and noticed all o rinngs were pushed out and no pintal caps....i then put stock ones on to get it back to the shop the next day, then drrove up and on way up number 2 injector was leaking, towed it to shop, tryed starting it then it hydrauliced it self.....then he spends 3 days on it, dryed out all cylinders, new oil, new filter, new plugs, new pintal caps, re tuned it for a safe tune, im now running 0.90 bar boost, before i was running 1.40 bar....and everytime i boost it its back fires, platters, shudders the car and flamage.....my tuner reacons "myself" f*ked the llife span on my motor and he doesnt want to boost it due to bores being a lil glazeed.........

thats my probllem, sorry for the loong story but had to give it out, so u understannd....

thanks guys...

wow

Umm....there are no words

Dobz Experienced

Dobz

Posted
Posted (edited)

Retracted comment due to following post.

It is true though because a workshops buisness can be affected by this sort of bad reporting, even if it may not have been their fault because we weren't getting the full story.

Edited by Dobz
The Dan Grand Master

The Dan

Posted
Posted

Once again everyone jumping on the band wagon. Were any of you there to see what had happened? Able to comment from personal experience. Considering he has named the shop I suggest everyone takes a second thought about posting about his abilities without knowing first hand what happened.

To start with: Why does your 'brand new' PE injectors come without pintle caps?

The story smells a little bit. There is more to it than what you are saying

The Dan Grand Master

The Dan

Posted
Posted

Fair enough we don't know the story. But installing injectors isn't difficult for qualified mechanics but by the looks of it this guy couldn't even do that right and then suggest the bores are glazed is also stupid

Yeah that's true but we are also relying on the OP's description of the event. Sometimes people do not relay 100% of the information. Maybe the tuner described the possible side effects of a leaking injector?

The customer installed the injectors himself? Or maybe has done other things which has brought about the initial problem? Like supplying his own injectors that didn't come with pintle caps

EdGTR Enthusiast

EdGTR

Posted
Posted

Ok so there was more to the story but that doesnt change the hard facts. Is he not boosting it up any further because it has the standard injectors back in it?

Have you got to the bottom of why the injector stayed open?

If you are not sure about a tuner or mechanic go and talk to another one but just remember that they are humans and that they see and do things differently to each other. There are many ways to do alot of things, but go with the facts and start at the beginning check over everything and if it all looks ok then put it behind you. Have you checked to see if the glazing of the bore is only on the fuel affected cylinder or accross the six equally. if its the same on all six then it wasnt the fuel and it was like that before.

  • 4 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • The Bogan
      NC MX5

      By The Bogan · Posted

      After using a protractor for an actually accurate assessment of what is required,  and by NOT using my uncalibrated eyeball I worked out I need a 25° silicone bend from the TB ro the MAF, but, my choice was either a 30° or a 23° (23° is a weird spec), so I grabbed the 23° one from Raceworks I also grabbed 1mtr of 3" straight from Just Jap, I needed 350mm, but they only had 300mm, or 1mtr lengths....meh Also ordered a 1/2" hose bulkhead fitting from fleabay, this has a smoothish mushroom looking head (they are designed for below the water line of boats) that will fit inside the bend, the hose bit and threaded bit looks to long, but nothing that a hacksaw cannot fix if required, the hose will then just get jamed on the threaded bit up to the retaining nut Fingers crossed and the unsightly amount of hose clamps will be reduced down to 4 once all the parts arrive 
    • joshuaho96
      R34 25GT Engine Light 21

      By joshuaho96 · Posted

      Oil change does not trigger code 21. Code 21 is for coilpacks primary side connection. You can try to clear the code with a battery disconnect, hold down the brake pedal to drain capacitors through the brake lights with the ignition on for 10-15 seconds before you reconnect the battery. I have seen R35 coil conversion permanently cause this code with no ill effects so it might be the resistance it wants to see isn't quite right on one or more coilpacks. Could be inside the ECU, could be the harness, could be a coil. You can test it all if you want or just ignore until the car actually starts misfiring.
    • joshuaho96
      R32 GTS (RB20DE) Injectors Replacement

      By joshuaho96 · Posted

      I forgot you have a Nistune ECU. Use Nistune to do all the tests I mentioned instead of faffing with 30+ year old electrical connectors. You can read MAF volts off that too, there are reference values in the service manual to tell you roughly what it should be in different conditions.
    • GTSBoy
      R32 GTS (RB20DE) Injectors Replacement

      By GTSBoy · Posted

      No. I think it might be the AFM. Hence the use of the terms "swaptronics", which implies the use of swapping out electronics for the purpose of diagnosis. It's about the only way to prove that a small/niggling/whatever problem with an AFM or a CAS or similar is actually caused by that AFM/CAS/whatever. A known good item swapped in that still gives the same problem is likely to be caused somewhere else. They're all the same. Spraying AFMs with cleaner is an each way bet between cleaning it and f**king it.
    • codygrimm27
      Can you mount the ATTESA pump in other locations?

      By codygrimm27 · Posted

      Oh wow! This might actually work amazingly. Do you know the ratio of the diff? I was told the only thing you need to make sure of is if the front & rear diff ratios are the same. Ours is a 4.083 Thanks!
×
×
  • Create New...