Jump to content
SAU Community

R32 N/a Rear End Problem

Whitt1
 Share

Recommended Posts

Whitt1 Apprentice

Whitt1

Posted
Posted

Hey guys I've got a r32 n/a ad the guy I bought it off welded the diff but now when I reverse and go around corners slow the hole back of the car feels like its jumping ad theres a really bad noise sounds like the diff or something is gunna fall out lol I jacked the car up and seen if anything was loose but everything seemd okay but one of the axels of whateva te are is a bit wobbly but not to bad anyone now would it could be? I need help ASAP cause I attend drift days and don't want nothing breaking so if anyone knows what it could be would be very helpful thanks

Link to comment
https://www.sau.com.au/forums/topic/401091-r32-na-rear-end-problem/
Share on other sites
aussietroy Proficient

aussietroy

Posted
Posted

When cornering your inside wheel doesnt rotate at the same speed as your outside, this is why diffs allow the outside wheel to spin faster while cornering. by welding the diff you eliminate this and therefore have both wheels spinning at the same speed so it will "skip" at slow speeds.

Its perfect for drifting but not what you want for a daily

your only option is to get a new diff. Ideally a LSD so you can have your lock when you want it but it will act normal on the streets

Whitt1 Apprentice

Whitt1

Posted
  • Author
Posted

Yeh it doesn't make the normal skipping noise tho the whole car like rocks Back and for when turning and when reversing its make a heap bad clunking noise sounds like the wheels or something is gun a come off but I dunno what it is? Do you no any where cheap that will have a r200 6 bolt? And how much does it cost to get shimmed?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      new 1.5 LSD issues/concerns

      By GTSBoy · Posted

      A 1.5 way is a 2 way. It is just a 2 way with a less aggressive ramp on overrun.
    • GTSBoy
      Boost cut after swap(RB25DET NEO) R34

      By GTSBoy · Posted

      The ABS and/or TCS being missing/broken will not cause the engine to misbehave. It just casues CEL to come on and annoy you. The CEL is useless if it is always on, so you have to do the things you have to do to get rid of it, so it can be useful. Being a Stag ECU, then yes, it will not expect TCS to be present. But it will expect ABS to be present and working. You will need to either make the ABS CU talk to the ECU (don't ask me what that will take on an NA R34), and make sure the hardware is working....or, you just need to blank it out in Nistune. Do not persist with the stock ECU. You will just have problems. Gte it Nistuned. Start from there. DO YOU HAVE A BOOST SENSOR? The ECU's boost sensor that it. It is connected to the loom at the rear of the coil cover. Usually rides on the firewall on an R34, but is usually bolted down to a bracket along with all the other crap at the back of the coil cover when a Neo is dropped into another car. If you do not have it, the ECU will shit the bed. So, do you have one?
    • Kapr
      Boost cut after swap(RB25DET NEO) R34

      By Kapr · Posted

      So sadly the fuel pump etc was not it. The pump and filter is new and it is still cutting around 4000 rpm. A read something about ABS/TCS (engine is from stagea and ECU too so no TCS) and i dont know for 100% that my car has ABS. It has ABS "cube" in engine bay but i dont think it works(or at least from my braking experience). Can be something like that?  I will be driving the car next week to Nistune tuner to properly see what is wrong...  
    • JC71
      new 1.5 LSD issues/concerns

      By JC71 · Posted

      the Tomei LSD fluid with lsd kit. frustrated that it was shaking the car to crap and affecting everything else negatively, I pulled the diff last night, and removed the lsd carrier, could not find anything wrong, however it seem to be 100 locked up acceleration, and deacceleration, wondering if they sent me a 2 way not a 1.5??  either way I installed the stock open carrier back in place. test drove everything smooth as butter again. no shake, shutter, random, what felt like clutch slip and grab or drive shaft play, etc. something differently wrong in side the lsd. I might bother taking it apart (if possible) to figure out what's going on inside this carrier, as bought too long ago to return.  only draw back is its back to a one wheel wonder.
    • TurboTapin
      Most women will agree that parking is the most taxing part of driving

      By TurboTapin · Posted

      What a time to be alive!!
×
×
  • Create New...