Jump to content
SAU Community

R34 Gtr - Time To Go The Next Step!

r0bstr_
 Share

Recommended Posts

r0bstr_ Enthusiast

r0bstr_

Posted
Posted

G'Day All,

Recently acquired a very nice 1999 R34 GTR V-spec (ex TPG34R) and the power bug has bitten already.

The GTR is already quite modified with some nice fruit and drives quite nice however, I'd like to get into the 550awhp+ league.

On the current conservative tune, it's pushing approx 450rwhp and 410awhp.

The internals of the RB26DETT as far as I'm aware are completely stock (disregarding the HKS V-CAM).

Do I go a big single? Do I keep the turbos I have? Do I upgrade to -10's?

Do I keep the same setup and just stroke to 2.8L courtesy of HKS?

I do like the responsiveness of the current setup however, if modifying further will in turn make the response a tad more laggy it really wouldnt bother me, as long as boost comes on by 3400rpm I'm happy (HKS V-CAM should make this happen even with a big single I've been told!)

I'd like to keep the car as reliable as possible so I'm thinking before doing any further modifications, I think it's wise to put some 'failsafe' gear on it such as a Sump Baffle, etc?

Opinions here would be great! <Insert usual stuff that goes wrong on 34 GTR's once you push the power I'm pushing+ here)

What should I be looking at next? All opinions are most welcome!

Current setup:

Internally stock RB26DETT (1999 R34 GTR V-Spec motor)

HKS V-CAM Step 1 Type A ($5600 alone and rare)

Garrett 2860r-5's with 1 bar wastegate

Sard 700cc injectors

Nismo Airflow metres

Apexi PowerFC w/hand controller

Tomei Xpreme Exhaust Manifold

Racepace custom 4" exhaust with Mines Style dump ($4000 & the pinnacle of exhaust systems)

Racepace custom 19" Row oil cooler with thermo

Racepace custom water / oil tank

Racepace silicon hoses

Racepace fitted 450lb springs

Racepace customer upper control arms

Whiteline heavyduty adjustable front sway bar

Whiteline heavyduty adjustable rear sway bar

HKS Cam Gear & timing belt

Carbon Fibre Twin Plate Clutch

Koyo Race Radiator

PHR Billet Radiator Support

ARC Radiator Shroud

19" VOLK TE37 Bronze 9.5" all round

275 / 30 / 19 Bridgestone RE01R Tyres with 70% + tread

DBA5000 two piece front rotors w/Ferodo DS2500 @ 90%

DBA400 Rear Rotors w/Ferodo DS2500 @ 90%

Project Mu handbrake shoes

Nismo Braided Brake Lines

Cusco Master Cylinder brace

Link to comment
https://www.sau.com.au/forums/topic/401163-r34-gtr-time-to-go-the-next-step/
Share on other sites
MrStabby Grand Master

MrStabby

Posted
Posted

You're not making the power you can with -5s, should be more like 500hp with those on a good setup. What boost are you running? Might need to just wind it up and retune.

Check the sticky to see what others are getting with -5s.

r0bstr_ Enthusiast

r0bstr_

Posted
  • Author
Posted

MrStabby,

Could you please link me to this sticky thread? I can't seem to find it.

Thanks.

You're not making the power you can with -5s, should be more like 500hp with those on a good setup. What boost are you running? Might need to just wind it up and retune.

Check the sticky to see what others are getting with -5s.

Ziller Rising Star

Ziller

Posted
Posted

How long will the internals last?? Go the 2.8 then wind up the boost and you will never look back :yes:

The unopened engine will probebly last longer that the built engine lol....The guts of them have survived over 100,000kms of abuse and are still running. You dont see to many built engine lasting that long.

rObstr are you kidding? just leave it for now! Just take it to a well known tuner to sort it out as is.

I think you need to cool down a bit buddy, plenty of time for that later when you learn more about these cars.

r0bstr_ Enthusiast

r0bstr_

Posted
  • Author
Posted (edited)

Haha.. what can I say.. HKS 2.8L, T04Z and external gate in an R34 GTR coupled with HKS V-CAM makes me wet.. just a little.

However, if I can push more boost and get a better tune (which I'm sure is very possible) out of my current setup keeping it within safe limits, then I'll do so.

Anybody have opinions on how to make my current setup even safer? What should I be replacing/adding to ensure complete reliability?

The unopened engine will probebly last longer that the built engine lol....The guts of them have survived over 100,000kms of abuse and are still running. You dont see to many built engine lasting that long.

rObstr are you kidding? just leave it for now! Just take it to a well known tuner to sort it out as is.

I think you need to cool down a bit buddy, plenty of time for that later when you learn more about these cars.

Edited by r0bstr_
choyda Veteran

choyda

Posted
Posted

Hi,

I have a similar setup (no VCAM) and getting around 480rwhp on -5's. I ditched the AFM's - running Vipec (MAP).

From a reliability perspective, not sure how much difference it makes moving away from AFM's.

Solid piping from airbox/pods may make a difference

What fuel pump are you running?

Damien

r0bstr_ Enthusiast

r0bstr_

Posted
  • Author
Posted

To be honest I'm not 100% sure.

From the sound of it: a single in-tank 044.. makes a little "squirt/push" sound every 4 seconds.. would that be right?

Hi,

I have a similar setup (no VCAM) and getting around 480rwhp on -5's. I ditched the AFM's - running Vipec (MAP).

From a reliability perspective, not sure how much difference it makes moving away from AFM's.

Solid piping from airbox/pods may make a difference

What fuel pump are you running?

Damien

r0bstr_ Enthusiast

r0bstr_

Posted
  • Author
Posted

Actually listening to Bosch 044 pumps on youtube, I don't think it's one of them..

Definately does not make that loud noise when ignition is on!

It makes a slight zim noise (can barely hear it) when I switch the ignition on for a split second then goes quiet.

On idle every 3-4 seconds you can hear it make the cool squirt noise from the rear.

Any ideas?

r0bstr_ Enthusiast

r0bstr_

Posted
  • Author
Posted

I've been told by the previous owner it's running 20psi however, I wouldn't really know how to confirm that.

Car doesn't have an EBC so I'm assuming it's has some type of boost control valve in the engine bay.. Any way to confirm?

choyda Veteran

choyda

Posted
Posted

EBC would be good. I'm running 18psi.

Not sure around your fuel pump. If you're cornering, surge tank for reliability with in and out tank pump?

Even the direct to battery wiring mod for the fuel pump?

wedge_r34gtr Mentor

wedge_r34gtr

Posted
Posted

Haha.. what can I say.. HKS 2.8L, T04Z and external gate in an R34 GTR coupled with HKS V-CAM makes me wet.. just a little.

Me Too!!!

I think your next investment should be an EBC. Its strange that the previous owners have spent $20k+ on support mods and yet no EBC has been installed.

Also, +1 for ditching the MAF's, go for a vipec/link or haltech MAP setup. Remember, a good safe tune will is the best thing you can do for relibility.

IMO if you plan to keep the car off the track, installing the above two items should get you ~500+rwhp, which is ample for the street. If the plan is to track the car, an upgrade the oil system is a must with an extended sump, baffels and new pump. This has been covered in mant topics so i won't go into further detail

gtr jet Veteran

gtr jet

Posted
Posted

If it was done at Racepace then it might have one of there manual boost controllers on it.

Give them a call, let them know your mods and see what they say.

Or try upgrading injectors and fuel pump and give E85 a go.

N1GTR Grand Master

N1GTR

Posted
Posted

PLEASE STOP NOW!!!!!

Don't take this as an attack or anything but it's looking like you don't know much about GTR's.

You've bought a tuned GTR from someone who had the sense to take it to the best workshop in Australia to get the work done and car taken care of. Don't go fu(king it up now!

If you want more from it, go back to Racepace and ask for a stage 2 engine. It's not cheap, but you'll be in the 400kw range with a mountain of area under the curve while being totally reliable and sedate to drive around town.

N1GTR Grand Master

N1GTR

Posted
Posted

I think your next investment should be an EBC. Its strange that the previous owners have spent $20k+ on support mods and yet no EBC has been installed.

Racepace don't use EBC's, it's not strange at all :)

r0bstr_ Enthusiast

r0bstr_

Posted
  • Author
Posted

N1GTR, I don't know the in's and out's of my GTR as I didn't build it - not GTR's in general.

Anyway, I've moved this vehicle to WA from VIC so Racepace isn't an option. There are still some very good workshops around here anyhow.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • ToothDR32
      $5 Clock upgrade for R32 GTR

      By ToothDR32 · Posted

      Hello, sorry for being late to join the discussion, but my clock just died on me.   Ive tried to look at Michaels digital clock repair.docx and it doesnt work maybe the file has expired.   Please let me know if you can re upload it or take some youtube videos to show us how to get the clock installed? thanks
    • MissMintyR33
      R33 persistent issues. P/steering and lag/misfire

      By MissMintyR33 · Posted

      I thought that might be the case, thats what I'll start saving for. Thanks for the info 
    • jtha7
      Strange issue RB25DET wont start

      By jtha7 · Posted

      Ps i found the below forum and it seems to be the same scenario Im dealing with. Going to check my ECU coolant temp wire tomorrow    From NICOclub forum: s1 RB25det flooding at start up Thu Apr 11, 2013 7:23 am I am completely lost on this. Car ran perfectly fine when I parked it at the end of the year. I took the engine out and painted the engine bay, and put a fuel cell with an inline walbro 255 instead of the in tank unit I had last year. After reinstalling everything, the engine floods when the fuel pump primes. if i pull the fuel pump fuse it'll start, and as soon as I put the fuse back in it starts running ridiculously rich. I checked the tps voltage, and its fine. Cleaned the maf as it had some dust from sitting on a shelf all winter, fuel pressure is correct while running, but wont fire until there is less than 5psi in the lines. The fuel lines are run correctly. I have found a few threads with the same problem but no actual explanation of what fixed it, the threads just ended. Any help would be appreciated. Rb25det s1 walbro255 fuel pump nismo fpr holset hx35 turbo fmic 3" exhaust freddy intake manifold q45tb q45 maf   Re: s1 RB25det flooding at start up Fri Apr 12, 2013 5:07 am No, I didn't. I found the problem though. There was a break in one of the ecu coolant temp sensor wires. Once it was repaired it fired right up with no problems. I would have never thought a non working coolant temp sensor would have caused such an issue.
    • jtha7
      Strange issue RB25DET wont start

      By jtha7 · Posted

      Hi sorry late reply I didnt get a chance to take any pics (my mechanics on the other side of the city) but the plugs were fouled from being too rich. I noticed the MAF wasn't genuine, so I replaced it with a genuine green label unit. I also swapped in a different ignitor, but the issue remains. I've narrowed it down a bit now: - If I unplug and reconnect the fuel lines and install fresh spark plugs, the car starts right up and runs perfectly. Took it around the block with no issues - As soon as I shut it off and try to restart, it won't start again - Fuel pressure while cranking is steady around 40 psi, injectors have good spray, return line is clear, and the FPR vacuum is working. It just seems like it's getting flooded after the first start I unplugged coolant sensors to see if its related to ECU flooding but that didnt make a difference. Im thinking its related to this because this issue only started happening after fixing coolant leaks and replacing the bottom part of the stock manifolds coolant pipe. My mechanic took off the inlet to get to get to do these repairs. My mechanics actually just an old mate who's retired now so ill be taking it to a different mechanic who i know has exp with RBs to see if they find anything. If you have any ideas please send em lll give it a try. Ive tried other things like swapping the injectors, fuel rail, different fuel pressure regs, different ignitor, spark plugs, comp test and MAF but the same issue persists.
    • GTSBoy
      Freddy Plenum vs Genuine options RB25

      By GTSBoy · Posted

      My return flow is custom and puts the return behind the reo, instead of at the bottom. All my core is in the air flow, rather than losing some of it up behind the reo. I realise that the core really acts more as a spiky heatsink than as a constant rate heat exchanger, and that therefore size is important.... but mine fits everything I needed and wanted without having to cut anything, and that's worth something too. And there won't be a hot patch of core up behind the reo after every hit, releasing heat back into the intake air.
×
×
  • Create New...