Jump to content
SAU Community

Car Wouldn't Start At All!

Burrieddreamz

By Burrieddreamz,
in General Maintenance

 Share

Recommended Posts

Burrieddreamz Contributor

Burrieddreamz

Posted
Posted (edited)

Alright guys I have a major eff up problem here

This morning I turned the ignition on .. after 3-4 seconds the car didn't start but did a boom from the exhaust and didn't start after that after several tries.

I don't really know what has happened. Car had very less fuel , just over E ( may be 3-4 litres) .

Car has Walbro fuel pump ( thats what previous owner said)

What I;ve done so far

- Filled more petrol ( another 5 Litres using a jerry can)

- Changed the fuel filter

- Tried jump start

Sevral tries but no luck. Car behaves so rude!

After a long self car starts for a fraction of second and dies.

- Cleaned AFM ( haven't put it yet)

Do I have to bleed ? my mate said it could be air. becuase I had less fuel and the car has air in the fuel line or something ?

any idea ?

What my car has?

- Front Mount intercooler

- Blow off valve

- Pod filter intake

- Spitfire coilpacks

- NGK spark plugs

- Cusco Catch Can

- Custom made throttle body

- Boost controller (manual)

- 3" kakimoto Exhaust (jasma)

- Tuned Ecu

14psi boost and car's having a 330hp on wheels (tuned in sydney)

any help guys ?

thanks in advance

Engine:

20111231185844.jpg

Edited by Burrieddreamz
Link to comment
https://www.sau.com.au/forums/topic/401252-car-wouldnt-start-at-all/
Share on other sites
Burrieddreamz Contributor

Burrieddreamz

Posted
  • Author
Posted

I don't really know

I think it was due to injectors fueling more , needs to be tuned is it?

well it was changed in Aug 2011 by previous owner.

rust because there was water on the block ( the guy didnt use this car for a long time and then finally sold it)

does anyone know how to fix the injectors ? its running rich atm

Moodles2 Grand Master

Moodles2

Posted
Posted

If the ECU was tuned for the atmo BOV, then it might make things worse putting the stock one back on (re-circulating type).

What kind of "tuned" ECU? The cold start might need tweaking, especially if it was tuned in the warmer seasons or you live in a area which is cooler than where the owner lived.

Burrieddreamz Contributor

Burrieddreamz

Posted
  • Author
Posted

Thanks man

I am not sure what did he do to it.

It was okay in summer and since the winter started its having hard time starting in the morning.

ECU I checked its a nissan standard one I think its re-mapped. I live in Melbourne and car came from Sydney ( my mate bought it )

Also fuel economy on this one is sh*T

whole tank would do about 280-300 max .

:wacko:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      Boost cut after swap(RB25DET NEO) R34

      By GTSBoy · Posted

      Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • dyl33
      VOLK RACING GTC CENTRE CAPS

      By dyl33 · Posted

      Centre caps $250
    • Kapr
      Boost cut after swap(RB25DET NEO) R34

      By Kapr · Posted

      Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Duncan
      Boost cut after swap(RB25DET NEO) R34

      By Duncan · Posted

      Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Kapr
      Boost cut after swap(RB25DET NEO) R34

      By Kapr · Posted

      Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...