Jump to content
SAU Community

Recommended Posts

ok so my bosdh intank fuel filter keeps clogging up andgetting f**ked by debris in my tank.

it seems filtering my tank by using pumps in kinda expencive.

so i was gonna buy a new tank but i suppose i can get mine cleaned propperly.

i dont know if its random dirt and crap or if their has been standing watewr in their at some point and their is developed rust or something.

my question is where in adel should i go to have it cleaned and what is involved in cleaning a tank properly? can it be done myself?

Link to comment
https://www.sau.com.au/forums/topic/401560-fuel-tank-clean-in-sa/
Share on other sites

interesting

fits but you need preety much everything associated with it.

so:

tank

straps

sender/pump

gauge (as that is cal'd to the 72 lt instead of 60.)

tank and straps i would get together

pump i assume a bosch internal pump will do like the gtst (needs to be replaced again anyway)

sender- would this be for the guage?

and guage....why would you replace this would the new sender just give the propper reading for the extra 12ltrs?

Cleaning the tank your self is pretty easy mate. Unfortunate accident caused a fuel fire while i was changing my fuel pump wiring. Any hoo i needed to clean the tank out after from melted bits and bobs. Its only half dozen bolts or so and a few hose clamps. Shouldn't take longer than 15 mins to drop it out. Drain it and go buy 10 cans off carbie cleaner and go wild. Inside of your tank should be clean i would imagine your only wanting to flush out shit that's gotten into tank.

Its pretty simple just make sure that once your done you give it a good 2/3 days dry time after you've cleaned it.

If you've got rust issues i wouldn't risk using even if you clean it.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Cheers. Skyline is back on the menu, can’t get rid of it. It’s like a child you don’t want, or herpes 
    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
×
×
  • Create New...