Jump to content
SAU Community

[Syd] R32/r33/r34 Parts/turbos/accessories/exh Etc...

krayzie32
 Share

Recommended Posts

krayzie32 Mentor

krayzie32

Posted
Posted (edited)

Parts as listed below.

Pick up preffered (Can post at cost if required.)

PM for Pics and other enquiries.

No chit chat...

Wanna chat go to wasteland.

Wanna haggle use PM.

01•R32 RB20 Turbo (Minimum Play, No Smoke/Leaks, Good Nick)__________160Buxx

02•R32 Custom Alloy Catch Can Setup__________150Buxx

03•Custom R32 Intercooler Piping (Crossover pipe deleted and a HKS SSQV Mounted near throttlebody)__________180Buxx 

04•Cooling Pro Intercooler Core 600x300x76 __________100Buxx

**03 & 04__________250Buxx**

05•Apexi 60mm Boost Guage with Stand__________100Buxx

06•Greddy Profec B Spec II__________300Buxx

07•Surge Tank Setup with 044__________320Buxx

08•Bosch 044 (Used)__________150Buxx

09•R34 GTR Injectors clean & tested then used for ~1500kms__________280Buxx **Can chuck in R34 GTR Rail & FPR for 50Buxx**

10•R33 GTR (V-Spec) Drivers Seat__________450Buxx

11•R32 GTSt (Late Model) Passenger Seat__________50Buxx

12•R32 GTSt (Late Model) Rear Seat__________100Buxx

13•R32 GTSt Front Bar in Blue (Cut for FMIC)__________120Buxx

14•R32 GTSt Reo (Cut for FMIC)__________120Buxx

15•R32 Front Lights (Fisheye) & indicators__________120Buxx

(has eyelids glued on)

16•Alternator (RB20)__________80Buxx

17•Starter (RB20)__________80Buxx

18•Wheels 4x 5spoke 17x8 unsure of offset.

(Good for skids or trailer) plenty of tread left.__________250Buxx

19•Alloy Radiator 42mm__________120Buxx

20•R32 (All) Cusco F&R Strut Braces__________270Buxx Pair or 150Buxx ea (rear wont be sold until front is sold)

21•RB20DET 4WD Complete (Has Knock)__________200Buxx

22•Haltech E6K Standalone ECU with Full wiring looms & wiring diagrams, relays, switches, coils, coil leads, intake temp sensor, coolant temp sensor & 3bar map sensors, pulled from my R32 GTS4 in perfect nick but can be wired into anycar__________900Buxx

**More info can be found on this pdf...**

http://www.fueltech.com.au/pdfs/HalE6K.pdf

***Manual can be found here:

http://www.haltech.com/wp-content/uploads/2011/01/E6KManual.pdf***

23•HKS GT28 Cast Dumps Suit RB26 with GT28 Turbos (Bell mouth style, Hi Flow, Can be machined out.) Paid 550+Post, Sell for__________500Buxx Posted

24•Kakimoto Regu-06&R 3" Catback Exhuast Suit R32 GTSt, GTS4 & GTR (Mid Muffler replaced with Hotdog)__________380Buxx

25•R33 Radiator Perfect Nick__________75Buxx

26•HKS GTRS Turbos Suit RB26/27/28/30/31 etc etc Perfect__________2700Buxx

27•RPM Custom Oil Cooler & Remote Filter Setup R32 GTR (Passenger Side Mounted)__________550Buxx

28•RPM Custom Catch Can Setup__________200Buxx 

29•RB25DET Long Motor No Accessories (From R34 Non Neo) ~168psi accross all cylinders__________1400Buxx 

more to come

Edited by krayzie32

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      R32 Gtst - Track Car

      By Duncan · Posted

      Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • Dose Pipe Sutututu
      R32 Gtst - Track Car

      By Dose Pipe Sutututu · Posted

      https://www.facebook.com/share/p/18rmVb1SKB/ 
    • GTSBoy
      Leak from Tokico BM50 Brake Master Cylinder

      By GTSBoy · Posted

      The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • No Crust Racing
      R32 Gtst - Track Car

      By No Crust Racing · Posted

      Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
    • MBS206
      R32 Gtst - Track Car

      By MBS206 · Posted

      I feel there must have been a FB/insta post and the weekend did not start well at all I hope everyone is all okay
×
×
  • Create New...